Re: Power Steering Adapter Plates
 

It's time.:metal: Can you run that York pump with power steering? The power steering pump is mounted on the otherside? Pm me about the bracket.

Re: Power Steering Adapter Plates
 

Hey I could use one of those can you send me info thanks

Re: Power Steering Adapter Plates
 

PM sent.....thanks :)

Re: Power Steering Adapter Plates
 

Want to get a adaptor plate for my '63 GMC. Send me a PM please for payment info. have a steering box off a '78 chevy 1/2 ton.

Re: Power Steering Adapter Plates
 

PM sent....thanks :)

Re: Power Steering Adapter Plates
 

got mine! and it came in one day earlier than expected. nice

thanks john!

SO... have any of you guys gone the route of bolting the steering shaft adapter? if you did, what size bolt did you use, and do you think 1 should be good enough?

thanks again,
manny

Re: Power Steering Adapter Plates
 

I would think one grade 8, 1/4" or 5/16" bolt would be sufficient.

Re: Power Steering Adapter Plates
 

k. thanks again cap'n!

Re: Power Steering Adapter Plates
 

That's what I did on mine.
But I'll probably do a second one about 2-1/2" down just to give me a warm fuzzy feeling.

Re: Power Steering Adapter Plates
 

yea thats what i was thinking. since i dont have access to a better welder. hey lostmy65, i asked a question on another one of your threads about a pitman arm, but maybe i can ask you on here. i have a steering box out of an 87burb with the pitman arm on it still. my concern is, the box has a casting 7802644L. ive read on a couple of other places that the L designates 4x4, but they guys swears it was a 2wd burb. the pitman has a casting GMT6272424, which is the same that you had posted a picture of. if you could help clarify, it would ease my mind before i cut out my original steering box/shaft.

thanks again!!!!

Re: Power Steering Adapter Plates
 

The 4x4 arm looks a lot different than the 2wd arm.

Here is a 4x4 box and arm:

http://67-72chevytrucks.com/vboard/a...1&d=1250374282

Here is a 2wd box:
http://i232.photobucket.com/albums/e...BoxMounted.jpg

Re: Power Steering Adapter Plates
 

Thanks for the plates John,

They look great with fantastic detailed instructions and they arrived much sooner than expected. Thanks for the excellent product and for sharing your knowledge.

Re: Power Steering Adapter Plates
 

Thanks for the kind words Jack. I'm glad you got them in time and are happy with your purchase. I appreciate the purchase.

Re: Power Steering Adapter Plates
 

I need one for my 65 please.

Re: Power Steering Adapter Plates
 

PM sent......

Re: Power Steering Adapter Plates
 

I need a adapter plate for my 63... is it anything else i need, to use my original steering colum ? Best regards from norway!

Re: Power Steering Adapter Plates
 

It is not absolutely necessary, but the I also offer the tube and flange shown in mannyb's post above. That is post #126. The tube and flange is an extra $20.00. You can also reuse the original flange on the end of the steering column shaft. How to do that is shown in the installation instructions. Let me know.

Re: Power Steering Adapter Plates
 

PM sent!

Re: Power Steering Adapter Plates
 

Sent you payment via paypal for one of your PS brackets thanks.

Re: Power Steering Adapter Plates
 

PM returned 1942



Thanks for the purchase:) Your adapter plate will ship tomorrow.

Re: Power Steering Adapter Plates
 

gotta say, beautiful piece, worked great, eyeing that column piece for the next job... would save some time w/ welding and measuring!

Re: Power Steering Adapter Plates
 

Thanks for the compliment Jon

How are you coming on your wife's truck?

Re: Power Steering Adapter Plates
 

its going great! for the idler I just drilled some new holes, same for the sway bar.
had to shorten the steering shaft 2 inches, then welded it up with the arc welder kind of like how you would do the old guided bend test.
I ended up using the rag joint from the 87, and bolted it to the 63's upper.

Re: Power Steering Adapter Plates
 

hey jon, i havent started my power steering setup quite yet. wanted to tackle the motor first. BUT i was just wondering why you had to redrill holes for the idler arm and sway bar. im using a sway bar from an 87 burb bolted straight to the frame. is it going to be in the way w/ the new box?

Re: Power Steering Adapter Plates
 

Manny, if you use the '73-'87 idler arm along with the rest of the '73-'87 steering linkage, you will need to drill new holes to mount the idler arm. I prefer to use the complete '73-'87 steering linkage when doing a conversion. As for the sway bar, most trucks prior to about '65-'66 don't have the frames or the lower control arms drilled for a sway bar. Therefore you need to drill the holes to mount one on the earlier trucks.

Re: Power Steering Adapter Plates
 

i see. well, if i swap the idler arm as well, do i need to change anything else, or just drill new holes for it?

Re: Power Steering Adapter Plates
 

yep all I had to do was drill a bunch of holes!!:lol:

but it all worked, sway bar and steering all from the 87, with the adapter bracket.

Re: Power Steering Adapter Plates
 

k cool. thanks for the advice!

Re: Power Steering Adapter Plates
 

wait im confused. what holes do you have to drill out?

Re: Power Steering Adapter Plates
 

There is a bracket that attaches the idler arm, as shown in that pic, to the frame. It mounts to the frame differently than the '63-'66 bracket. Therefore you need to locate it and drill new holes. It is really quite simple to do.

Re: Power Steering Adapter Plates
 

Whanks for the fast shipping! its a great product!

I bought the new steering coupler, What do i need to do for a rag joint?

Re: Power Steering Adapter Plates
 

If your steering box doesn't have one on it, you will need the correct one for that box. There are 3 different sizes/splines on the input shaft. There are 2 different splines on a 3/4" shaft, and then a 13/16" diameter shaft. A Napa store might be your best bet at finding someone that can figure it out and get you what you need. If you happen to know what year your steering box is, that will be a big help.

Re: Power Steering Adapter Plates
 

Haven't had a chance to install yet but part looks great recieved it quick and nice directions. Thanks Captain.:metal:

Re: Power Steering Adapter Plates
 

i would like one too, please pm me with purchase info, thanks

Re: Power Steering Adapter Plates
 

PM sent....thanks :)

Re: Power Steering Adapter Plates
 

Hey Cpt. Sent you a PM a little earlier today. New member and looking to get one of your ps adapters. Thanks

Re: Power Steering Adapter Plates
 

I replied to your PM.........

Re: Power Steering Adapter Plates
 

Welcome to the forums.
Posted via Mobile Device

Re: Power Steering Adapter Plates
 

With so many different variations that guys are using for the conversion I'm still just a little confused. Can I use the the original 66 idler arm and steering linkage with a 79 pitman arm or do I need to make other changes. I will be ordering the adapter plate soon and I just want to know where I stand on this conversion. Thank, Brett

Re: Power Steering Adapter Plates
 

You can keep everything and just install the powersteering box with its pitman arm:
All linkage and idler arm can remain.
Here is my conversion:
http://67-72chevytrucks.com/vboard/s...d.php?t=438509
The template I made is now included with Captain's Adapter Plate.