Re: what seats did you put in your 67-72 Chevy truck ?
 

Got these at the local Pull-a-Part for $40.00 a piece. They are aftermarket rear seats from a late model suburban. They are very comfortable. Got the console from the same burb and added the cup holder.

Re: what seats did you put in your 67-72 Chevy truck ?
 

I got some front buckets out of an 04 mercury mariner (ford escape) heated, leather and power. Also grabbed a center console out of a 04 dodge ram for the extra seat.

Re: what seats did you put in your 67-72 Chevy truck ?
 

It took a lot of fab on the brackets to get it to sit low enough but they turned out great and so comfy.
http://i1220.photobucket.com/albums/...pslv7jna1h.jpg

Re: what seats did you put in your 67-72 Chevy truck ?
 

What I been using lately.

Re: what seats did you put in your 67-72 Chevy truck ?
 

LOL!!! a little bit of color match and your good to go, i used two one gallon cans of paint some times you gotta do what you gotta do.

Re: what seats did you put in your 67-72 Chevy truck ?
 

I have an original c10 cheyenne tach ac bucket seats by the numbers but somewhere along the lines it lost the buckets and gained a bench. Is there anywhere to buy a decent set of original buckets in red?

Re: what seats did you put in your 67-72 Chevy truck ?
 

https://lh6.googleusercontent.com/-Z...520console.jpg
Subaru Imprezza and a blazer console.
Dirty seats will get recovered someday.

Re: what seats did you put in your 67-72 Chevy truck ?
 

These seats are from an 05 trailblazer. They are big--but comfortable. Still have to hook up the electrics and decide whether or not I want the console there.

Re: what seats did you put in your 67-72 Chevy truck ?
 

Hello, and Happy New Year guys, loving the idea's. Now with the Holidays and my daughters near Christmas b-day out of the way I can start focusing time and effort back to my truck.
skygmc, I was entertaining using a '95-'99 chevy front 60/40 bench w/ the center console. But after seeing you and a couple others using the back crew cab seat ('01-'07??)I am interested. I like the fact that these seats have the built in cup holder. I guess I am a victim of my modern cup holders. But seriously how much cutting and hacking was required to fit in your truck? looks like you made a marriage btwn the original frame and the later frame?
I Had once upon a time '88-'94 40/60 bench in my '66 C10 (which is what these would be going in). Those were great minimal fab. but i sold those when i stopped driving the truck to tear into it. Sorry long story short, do you have a few more pics of what you encountered in your install?? Any feedback is appreciated as well. Thanks

Re: what seats did you put in your 67-72 Chevy truck ?
 

http://67-72chevytrucks.com/vboard/a...1&d=1483462434


I bought a set of buddy buckets.

Re: what seats did you put in your 67-72 Chevy truck ?
 

Love that seat! You bought new foam and they cut it? There is still enough cushion for the butt? Is that total custom or covers you bought? How much did that run you? Or should I say how much do you want for it?

Re: what seats did you put in your 67-72 Chevy truck ?
 

I'm considering having mine "cupped" out like that. The big issue is that I'd have to have a new cover made.

Here's how mine currently looks.

http://i221.photobucket.com/albums/d...psup6nkrg0.jpg

Re: what seats did you put in your 67-72 Chevy truck ?
 

Original 1967 Buddy Buckets highly modified and custom covered...

Re: what seats did you put in your 67-72 Chevy truck ?
 

First saw this in a mag. Similar but with a wider center section.

Re: what seats did you put in your 67-72 Chevy truck ?
 

http://67-72chevytrucks.com/vboard/a...1&d=1483491449


But I love my ProCar bucket seats.

Re: what seats did you put in your 67-72 Chevy truck ?
 

Have these in my 69, can't adjust them. With them all the way back(i'm 5'8") it still puts the steering column in your face & pedals to close... cushy though.

Re: what seats did you put in your 67-72 Chevy truck ?
 

Picked up a grey cup holder out of a 88-94 Silverado at pick n pull, cleaned it up, painted it black, and installed it.

Special thanks to "BugzC10" for the idea and sharing a link to show how he mounted it.

Re: what seats did you put in your 67-72 Chevy truck ?
 

Canuckvetter how do those seats fit in the cab? I like the way they look. Are they tight or do you have good foward and back adjustment.

Re: what seats did you put in your 67-72 Chevy truck ?
 

Very Nice...

Re: what seats did you put in your 67-72 Chevy truck ?
 

Put these former dodge buddies in today

Re: what seats did you put in your 67-72 Chevy truck ?
 

sub'd

Re: what seats did you put in your 67-72 Chevy truck ?
 

Can you post a couple of pictures with the cup holder out please.:chevy:

That's awesome I did the same thing except mine are out of an 03 second row seat Tahoe and still Functionable as far as the bottoms pulling up and the backs folding forward . I had headrests cut and bolstered the seats just a little more
Posted via Mobile Device

Re: what seats did you put in your 67-72 Chevy truck ?
 

Nice mod!!!

Re: what seats did you put in your 67-72 Chevy truck ?
 

My builder was a F---d man so the power seats are out of a Mustang. They still have the airbag tag. Cute hugh? That is also why the truck is painted 2011 F---d Mustang Grabber Blue. Not many around to be sure.

Re: what seats did you put in your 67-72 Chevy truck ?
 

http://67-72chevytrucks.com/vboard/a...1&d=1495291690

ProCar seats with buddy console.

Re: what seats did you put in your 67-72 Chevy truck ?
 

I used 11,12 Dodge Charger seats in 69 suburban

Re: what seats did you put in your 67-72 Chevy truck ?
 

2013 suburban center console

Re: what seats did you put in your 67-72 Chevy truck ?
 

Pre resto

Re: what seats did you put in your 67-72 Chevy truck ?
 

2011 2nd row.

Re: what seats did you put in your 67-72 Chevy truck ?
 

Captainab those look good. Do you have any pictures of the mounting modification? Also what did you mount your~07-14 console to?

Re: what seats did you put in your 67-72 Chevy truck ?
 

Not mine but a nice option for 67/72's.. The seat is a 60/40 bench with fold down armrest form a 90's Chevy or GMC.

Re: what seats did you put in your 67-72 Chevy truck ?
 

before and after... I think the buddies will look nice after they are redone.

Re: what seats did you put in your 67-72 Chevy truck ?
 

I would like to run these in mine. Do you have the gas tank in the factory location still?

Re: what seats did you put in your 67-72 Chevy truck ?
 

What I gather from this thread is...Anything goes!
You can adapt almost anything but sometimes you need to adapt or lower the seat mounts.

Re: what seats did you put in your 67-72 Chevy truck ?
 

I know this is an old thread, but these have to be the best seats I have seen. Best thing is, no modifications or special brackets needed.

Re: what seats did you put in your 67-72 Chevy truck ?
 

My seats came out of a Mitsubishi sedan at the self help wrecking yard. Got the electric adjusters working nicely and for $70 I'm pretty happy with them.

Re: what seats did you put in your 67-72 Chevy truck ?
 

I want something like this:

Re: what seats did you put in your 67-72 Chevy truck ?
 

original seat, mod the Concorde back seat (salvage yard) into it, reupholster to your taste

Re: what seats did you put in your 67-72 Chevy truck ?
 

Trying to keep my K1500 mostly on the original side....this seems original unless you happen to know trim levels fairly well.