|
Re: "Project Orangepeel" 52 A.D
wow thats some neat stuff mark, thanks for the tip. this thread is like a master class sometimes haha.
|
Re: "Project Orangepeel" 52 A.D
:lol::lol: Dont know about that,but thank you Russ!
|
Re: "Project Orangepeel" 52 A.D
I now know what to use to make a template. Now to find out how to make templates!!!!
|
Re: "Project Orangepeel" 52 A.D
Robert,Its really no different than just making your piece with metal.
get your sizes etc. and bend,curve,trim till you get the shape you want. that way your not wasting metal. Mark |
Re: "Project Orangepeel" 52 A.D
Thanks Mark. I'm going to pick some up today and see what I can do with it.
|
Re: "Project Orangepeel" 52 A.D
5 Attachment(s)
some of you may be wondering why this might be taking so long.
Well I'm also working on these. The 55 needed: full floor pan,trunk pan,rockers,and quarters. |
Re: "Project Orangepeel" 52 A.D
5 Attachment(s)
The 55's metal work is pretty close to being done.
The other project is a 67 I'm doing for another customer. It needed: partial floor,rockers,cab corners,cab supports,drip rail and smoothed out and filled firewall and smoothed cab seam. Mark |
Re: "Project Orangepeel" 52 A.D
That's a lot of very nice metal work.
|
Re: "Project Orangepeel" 52 A.D
Thanks Robert
|
Re: "Project Orangepeel" 52 A.D
Reaper
Strong work, as always.. what are your steps you go through to weld a roof seam. How to keep the weld from being contaminated from all the gunk in the seam. I hope you do a thread on the 67 in the alternative tinkering section. love to follow your work and learn thanks. Keep on keepin on nutz |
Re: "Project Orangepeel" 52 A.D
Sorry I was thinking that it was a 67 Impala. duh!!!!!
nutz |
Re: "Project Orangepeel" 52 A.D
Awesome work and great ideas Mark!!
Are you going to do a buildthread on the ‘55 also, when it’s ready? I’d like to see that. Maybe change your name in MMM....Metal Master Mark :metal::lol: |
Re: "Project Orangepeel" 52 A.D
Nutcase, normally with any seam like this I try and media blast first if possible.
Then I use a thin cutoff wheel and lightly run it down the length of seam to remove any other pieces of paint etc. Then start doing tacks every 2 inch or so and repeat. Mark |
Re: "Project Orangepeel" 52 A.D
Kees, I'm not sure if I'm going to do threads on both of these or not.
If there is enough interest I may consider. Thanks again for the compliments. Mark |
Re: "Project Orangepeel" 52 A.D
4 Attachment(s)
Update: I have been doing bodywork and priming of the interior pieces.
Pic 1. Center console and lid. Pic 2. Dash Pic 3. Windshield garnish moldings. Pic 4. Upper door and back of cab band. Mark |
Re: "Project Orangepeel" 52 A.D
3 Attachment(s)
Update:
So I was fairly busy the last 2 weekends getting all the interior parts prepped for paint. Pic 1. My dash painted and cleared. Pic 2. After getting it painted I then masked it off to paint the inside of the gauge pods. Pic 3. The dash installed and gauges in. Mark. |
Re: "Project Orangepeel" 52 A.D
Wow...!!
|
Re: "Project Orangepeel" 52 A.D
good doogly moogly. that looks fantastic!
|
Re: "Project Orangepeel" 52 A.D
I dig it
|
Re: "Project Orangepeel" 52 A.D
Looks good son...Dad
|
Re: "Project Orangepeel" 52 A.D
Thanks Everyone!
getting closer and closer. |
Re: "Project Orangepeel" 52 A.D
That interior is very creative and well done.
|
Re: "Project Orangepeel" 52 A.D
Thanks Robert.
It's been a lot of sanding getting in all the right spots. Mark |
Re: "Project Orangepeel" 52 A.D
3 Attachment(s)
Pic 1. A closer look at the gauges.
These are Speedhut gauges and the speedo is a GPS unit. Pic 2. The upper door panel and garnish molding in place. Pic 3. A shot from passenger side. Mark |
Re: "Project Orangepeel" 52 A.D
4 Attachment(s)
Update:
I was able to get a little work done tonight. I installed the center strip on the lid of the console. And also the detail strips for the sides. And finally set the switch dash into the console to complete the look. Mark |
| All times are GMT -4. The time now is 07:30 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com