Re: RideTech's New C10 CoilOver Kits
I wanna get this for my c20.
|
Re: RideTech's New C10 CoilOver Kits
You can but you will have to modify the end links.
|
Re: RideTech's New C10 CoilOver Kits
Quote:
|
Re: RideTech's New C10 CoilOver Kits
Quote:
|
Re: RideTech's New C10 CoilOver Kits
1 Attachment(s)
Here's mine complete. Just have to install the front muscle bar.
|
Re: RideTech's New C10 CoilOver Kits
Quote:
|
Re: RideTech's New C10 CoilOver Kits
Quote:
|
Re: RideTech's New C10 CoilOver Kits
Quote:
|
Re: RideTech's New C10 CoilOver Kits
Quote:
|
Re: RideTech's New C10 CoilOver Kits
either one of you guys that has this installed, and specifically for Kook87, what is your tire setup? I'm looking at pulling the trigger on this shortly. thanks and glad to be here.
|
Quote:
|
Re: RideTech's New C10 CoilOver Kits
275/40/20 rears and 245/40/20 fronts. Largest I can run an no rubbing issues. I had 295/40/20 on rear but they rubbed so I sold them and went with the 275s.
Posted via Mobile Device |
Re: RideTech's New C10 CoilOver Kits
Quote:
|
Re: RideTech's New C10 CoilOver Kits
Quote:
First off your truck is beautiful!! If you don't mind, what wheel width's and backspace are you running. We just received the Ridetech level 2 system for my son's 67. I would love to buy him wheels for Christmas but the truck won't be together for a few months. Thanks, Mike |
Re: RideTech's New C10 CoilOver Kits
Quote:
20x8.5 5.5 " front 20x10 4" rear |
Re: RideTech's New C10 CoilOver Kits
1 Attachment(s)
Here is a pic of mine close to finished, wanted to add a 60-66 truck for reference. It's has 18x11 and 18x12 wheels. 315 front tires 335 rear. Love the stance and the front will come down about an inch still. Hard to beat Ridetech parts, this is my second kit I've installed.
|
Re: RideTech's New C10 CoilOver Kits
Quote:
|
Re: RideTech's New C10 CoilOver Kits
Quote:
|
Re: RideTech's New C10 CoilOver Kits
Quote:
Thank you sir! |
Re: RideTech's New C10 CoilOver Kits
I'm using this kit with the muscle bar and nolimit rack and pinion.
the sway bar interferes with the rack (or vice versa) Is there longer end links available or any suggestions as to the best way to safely lengthen the end links. The links do come apart and it looks they are held together by a m12 -1.75 threaded rod. I'm not sure a longer threaded rod is the strongest / safest method. I need about another 2.5" http://i752.photobucket.com/albums/x...ps0wuxnvov.jpg |
Re: RideTech's New C10 CoilOver Kits
Just got the full level 2 kit and front swaybar. I was going to go air ride on my build but since it's my first ever frame off I decided to keep it simple so that I didn't get in over my head with fab work. Can't wait to start installing it.
|
Re: RideTech's New C10 CoilOver Kits
Ridetech stuff is very nice and the fit/quality is excellent. We used their coil over system on our Chevelle as well and couldn't be happier.
http://i2.photobucket.com/albums/y34...szwewqadc.jpeg |
Re: RideTech's New C10 CoilOver Kits
Sorry about the little picture, here is a better one
http://i2.photobucket.com/albums/y34...szwewqadc.jpeg |
Re: RideTech's New C10 CoilOver Kits
Looking good!
|
Re: RideTech's New C10 CoilOver Kits
1 Attachment(s)
I have this kit on my truck and the bottom control arm sits about 1-1/2 from the ground. No matter how much you change the spring height on the coil over the control arm will stay in the same place right? I took my truck for a ride and the control arms scrapped the ground multiple times.
|
All times are GMT -4. The time now is 12:00 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com