Re: Cabs for patch panel cuts
 

The picture of the 68 cab shows the radio and door panels. do you still have those and how much to ship to 34711. A few pictures would be great. Thanks

Re: Cabs for patch panel cuts
 

I still have the door panels heres some pictures. I might have more somewhere else.

Re: Cabs for patch panel cuts
 

The radio in that truck was not a gm and one of the push buttons is broken. I do have these GM AM radios. not sure if they work or not the first and the third would clean up pretty good and they both have the cups,nuts and mounting brakets.The third only has one knob. Radios fit in flat rate boxes for $11.15. The first is still in the dash stock since 1969 and its complete so I would want $40 for that one.$20 for the second and $30 for the third,plus the ship. LMK if your interested at all. If your interested in the door panels at all let me know and I can figure the shipping but figure $25 to buy the pair. If you dont like them I can look for more or if you want more/specific area pictures I can do that too. LMK Frank.

Re: Cabs for patch panel cuts
 

mid weekend bump

Re: Cabs for patch panel cuts
 

Hou much shipped to 87114?

http://i673.photobucket.com/albums/v...metalcut-1.jpg

Re: Cabs for patch panel cuts
 

Heres a bigger closer picture. If you want to mark it up more exactly where you need it. If you dont need past the depresions i have a piece that Im gonna cut out of my new cab Im fixing to install the high hump. LMK and I can price it more accurately. Thanks Frank

Re: Cabs for patch panel cuts
 

Re: Cabs for patch panel cuts
 

I have a mediam flat rate box thats 11 7/8 x 13 5/8 x 3 3/8 that piece should fit inside easily. If it does hows $32 shipped? Lmk thanks Frank

Re: Cabs for patch panel cuts
 

Yes, Rt. and Lt. front windshield pillars with top and bottom corners.

Re: Cabs for patch panel cuts
 

I can probably do that let me see whats in the yard.If not I can get some next weekend from my other stash.

Re: Cabs for patch panel cuts
 

Ya thats fine.... Let me replenish my paypal account... Takes couple of days usually.
Thanks
Posted via Mobile Device

Re: Cabs for patch panel cuts
 

Ok, thanks!

Re: Cabs for patch panel cuts
 

E-mail address sent

Re: Cabs for patch panel cuts
 

Just let me know when and Ill get it out. Thanks

Re: Cabs for patch panel cuts
 

will do...thanks

Re: Cabs for patch panel cuts
 

Recieved a paypal notice so I guess Ill be sending it out .Thanks!

Re: Cabs for patch panel cuts
 

Do you have any more good passenger side rear floor patches? (in the cab corner area behind the seat) I am getting a complete patch but only really need a small one...can take a pic of what I need exactly if you have any good areas of this....if so, how much for an 8"x8" piece from this area?

Re: Cabs for patch panel cuts
 

yup.......sent it today

Re: Cabs for patch panel cuts
 

Maybe, send me a picture and Ill see what I can do,Theres one cab Ive been chopping at that had some really good floor areas. Let me see what you need and I can give you a price.

Re: Cabs for patch panel cuts
 

ttt

Re: Cabs for patch panel cuts
 

TTT just trailered in another truck to cut patches out of. Let me know if theres anything you need.

Re: Cabs for patch panel cuts
 

I'm looking for inner roof pieces along the windshield. I need about 18 inches starting at say above the vent glass frame around to the length of the sunvisor. Both left and right sides. It will be shipped to 13637 New York. Thanks

Re: Cabs for patch panel cuts
 

The inner front roofs are shot on all these trucks I have here. I had one I thought was good I was going to use myself but when I cut it out it was ugly on the inside too. Your best bet is to buy the repair panel,it will be cheaper and better in the long run. I did a google search and bought mine from a place called Dreamers rods and pickups northwest. You can find them at WWW.dreamershotrods.com They had the best price,it was like $72 dollers plus the shipping. They sell the tri plus panel that everyone else has and it fit up great. Of course these pictures are upside down. My truck was rotted over the door too,I cut a patch out of another truck I had here.

Re: Cabs for patch panel cuts
 

Thanks for the tip. I wondered who sold the tri-plus ones.

Re: Cabs for patch panel cuts
 

Any more Cowl pieces like you sold Loosecanonzs??
I need the same peices both sides