Re: 56 Chev Garage build
Those lights and the steering wheel will look nice together.
|
Re: 56 Chev Garage build
5 Attachment(s)
Installed my cut down Van column and it now sticks out way better than before. One of the pics is before I cut it down, please excuse the fuzzy pics from my phone. I am going to invest in a new camera soon or maybe use the money on the build decisions decisions?
|
Re: 56 Chev Garage build
Nice work Dude!!
|
Re: 56 Chev Garage build
the column looks good.
you might want to shorten that column drop if you want seats in it though :D i run my tilt column straight and have it snug up to the bottom of the dash. as is, knee clearance is still an issue with my 6'4'' legs. i actually had to grind the point off the bottom of my speedo http://i306.photobucket.com/albums/n...e/truck063.jpg |
Re: 56 Chev Garage build
I already had it in with the bench seat it fit perfect I cut the coulmn outside the firewall, the seat is of a 1989 Silverado which I pie cut one inch (see early post pics) no knee problems what so ever, but than again I am only 6 feet not as tall as you! :ito:
Quote:
|
Re: 56 Chev Garage build
4 Attachment(s)
I wasn't to happy with my firewall, the paint was way to glossy for me. Today I picked up some chassis black paint and painted the inside fender wheels now I am happy with that color, darn now to re-paint the firewall again :uhmk:
|
Re: 56 Chev Garage build
The fender wells look good.
Kim |
Re: 56 Chev Garage build
5 Attachment(s)
Last weekend I hooked up the steering joints and repainted the firewall the paint was way to glossy for me, now to put the motor in hopefully next weekend if weather permits. I bolted and drilled the seat down, what you are seeing is the foam, the cover for the seat is sewed up dont want to install it just yet til everything is done and painted in the cab. If you look on post #102 you can see the difference in the column before it was shortened and these pics way better angle!
|
Re: 56 Chev Garage build
5 Attachment(s)
Last weekend mounted booster, mated the brake lines from proporting valve to the front and rear brake lines. Mounted the front end and started the fender body work. I had to use the painted grille cause the off shore china crap was giving me shuch a hassle nothing above or below the grill would line up!!:ito:
|
Re: 56 Chev Garage build
2 Attachment(s)
A couple more, if my pics don't look good sorry still trying to figure out this new camera!
|
Re: 56 Chev Garage build
1 Attachment(s)
I am seriously thinking of going with no chrome like this truck, remember this is going to be a daily driver! I am getting old and my polishing of chrome days are behind me now that is the reason why my harley davidson dyna low rider is down I am powder coating that bad boy. Before I sold my Road King Classic I was in the same boat polishing polishing, so now I just want paint!:ito:
|
Re: 56 Chev Garage build
Looking good Dude. You're making good progress.
I like the no chrome look. Kim |
Re: 56 Chev Garage build
Thanks Kim appreciate it.
Quote:
|
Re: 56 Chev Garage build
Quote:
|
Re: 56 Chev Garage build
Hey Rude dude, not sure if I overlooked it or what, but what year and make did your steering wheel come from?
The PO of my truck had a little tiny Grant steering wheel and that ain't gonna cut it. Also, where did you get your steering column mount from? Looking at going the same route as you did on the tilt steering out of a van. Oh yeah, what brake booster setup are you using? I have a camaro clip but the camaro booster is WAY too big for the firewall. Your trucks coming along nicely!!!! Thanks |
Re: 56 Chev Garage build
Bought it from importer at Pomona Swap Meet paid $225 it a small version of 55-56 Chevy Bel Air, Made in China speedway carries them but cheaper at swap meet.
http://www.speedwaymotors.com/1955-5...eel,58572.html. Read early post on my build column is 1974 to 81 Chevy Van. I think after 82 or 83 they put the key in column. Booster is generic street rod booster that fits the corvette master cylinder available from most aftermarket street rod magazines , I think speedway sells them, J&W hot rod parts, Yoogi's all of them carry it. Quote:
|
Re: 56 Chev Garage build
Thanks for the info. Found the steering column info in your build, overlooked it earlier.
|
Re: 56 Chev Garage build
Nice build!! What car does that lovely steerng wheel and column come from? Keep up the good work .
|
Re: 56 Chev Garage build
Hey rudedude,
The truck is really looking good. |
Re: 56 Chev Garage build
Sorry I'm blind :) Now I know...
|
Re: 56 Chev Garage build
5 Attachment(s)
Finally finish the top headlight portion of the fenders, had to cut and reweld a section of drivers side near grill. Next need to primer all of the fender and block sand. I think I would rather go to the Dentist than do body work!
|
Re: 56 Chev Garage build
1 Attachment(s)
Here is one more pic of fender, Don't mind the paint run a bug fly in when I was painting and I tried to take it out mistake, it sanded out al least no dents right.:ito:
|
Re: 56 Chev Garage build
It came out nice.
Kim |
Re: 56 Chev Garage build
Thanks Kim
Quote:
|
Re: 56 Chev Garage build
Hey man,
The truck is looking great. Nice work buddy. |
All times are GMT -4. The time now is 09:59 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com