Re: The 60-66 "PAYING IT FORWARD" thread!
Your top could easily be cut down to a short box 63GENIII and cut out to a Panoramic View.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
AWW Norm! It's taken me a while to get the nerve to get rid of it! Ive been wrestling with the idea of narrowing it a little and shortening it a couple of inches (for some reason its a little too long). I finally got tired of it sitting in the from yard and me not having the time to mess with it. Now Im thinking about it again! Lol. I guess I could re sheet it with flat aluminum after all the mods were done. Oh well, if it goes to a good home, it goes. If not, its back on the to do list.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
I'll fly in this winter and we'll cut it down together. Nice break for me and a nice piece for you.
|
Re: The 60-66 "Pay It Forward" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
I have several free GMC item
1. Running 292 engine, with clutch, bell housing, sm420 transmission, 3/4 ton rear end with springs, tires and wheels, 6 lug. Front and rear bumpers, driver quality. Zip code 32187. Will need to be picked up. Bill |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Anyone want two 6.5 x 16 inch factory steel 3 nub, 6 lug wheels free?
Pay actual shipping John Waco, TX |
Re: The 60-66 "PAYING IT FORWARD" thread!
SM465 - Supposedly recently rebuilt.
Come get it. |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
1 Attachment(s)
I have this seat. I'm in Sacramento CA. It's pretty clean considering. Last I looked, there were no tears in it. The rail says "71 Chevy 1/2 Ton" so it may have come from a wrecking yard or something. It was sitting in my '65, but I'm looking for some Silverado seats or something with built in belts. I'm busy and I don't have time to ship things, but feel free to come and get it. Thanks.Attachment 1434242
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Thought I would just mention on here the Paying it Forward ethos is alive and well in the UK.
Met up with Ian Brown at the NSRA Supernationals yesterday. I had some useless bits for Ian, Martin had a spare wheel carrier for Ian, Ian in turn had some gearbox seals for Martin and........ Ian had given me a lower A-Arm to replace mine which has been damaged sometime in the past, already cleaned up and painted. Thanks Ian !! http://i294.photobucket.com/albums/m...psdy55vv9v.jpg Secondly, Ian had also brought along both of his trucks old front hubs, all neatly wrapped up. Thanks again mate. http://i294.photobucket.com/albums/m...psd4yzw5ef.jpg So again, not a lot of work done, but truck progress |
Re: The 60-66 "PAYING IT FORWARD" thread!
Rian, nice to see it go international.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
1 Attachment(s)
Putting this out there though I have not had good luck giving stuff away on this forum...
12 bolt rear end, noisy, but works, drum to drum. New-ish brakes and wheel cylinders, will have to be reassembled as I needed the e-brake cables for a late model swap. Pinion seal leaks a little. Track bar mount has been cut after the pic. Obviously no shipping. Come and get it before it goes to scrap... |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Edited by Forum Staff.
If you read the rules in the first page, you'll see that this is a thread for generous members who are willing to give away parts. NOT for non-supporting members asking for free for parts. |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
Thanks very much, but I'm going to pass on them. |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
I have a 1966 long bed frame roller free if anyone wants it. Hillsboro oregon
Posted via Mobile Device |
Re: The 60-66 "PAYING IT FORWARD" thread!
ol skool, I wish you did not live so far away. That is what I need to start my winter project...dang it...
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Thank You!
|
Re: The 60-66 "PAYING IT FORWARD" thread!
I don't have any pictures to post at this time, but while I'm thinking about it...I just did a front disc brake swap/lowering job on my 63 C10. I have all 4 factory coil springs along with the stock front spindles that are assembled with decent drum brakes. Very useable if someone has the need. Obviously too heavy to ship, but they are free if someone can use them. I'll haul them off to the scrap metal yard in a week or two.
Jerry |
All times are GMT -4. The time now is 09:33 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com