Re: Power Brake Booster Adapter Bracket
PM replied to :)
Quote:
|
Re: Power Brake Booster Adapter Bracket
Will this put you back up front so I can keep tabs on you and your nice fab work!!
|
Re: Power Brake Booster Adapter Bracket
It will for just a short time with as busy as this classified section is. You can always find this thread again by either subscribing to it, or simply follow the link to it from my signature line.
Quote:
|
Re: Power Brake Booster Adapter Bracket
Received my bracket in the mail yesterday! Looks great! Thanks again! Now I've just gotta find time to put it on.
|
Re: Power Brake Booster Adapter Bracket
PM sent
|
Re: Power Brake Booster Adapter Bracket
PM replied to :)
Quote:
|
Re: Power Brake Booster Adapter Bracket
Quote:
|
Re: Power Brake Booster Adapter Bracket
Hey, just getting started on a build of a '70 Long bed stepside. What exactly is the advantage of using this setup?
|
Re: Power Brake Booster Adapter Bracket
The purpose of my '67-'72 brake booster bracket is to get the booster and master cylinder closer to the firewall instead of hanging way out there. You do not have to use a newer booster if you don't want to. The '67-'70 is one of the compatable boosters. But if you are going to upgrade to front disc brakes, that would not be the one that I would choose. If you do go with a newer brake booster, you can find one in just about any wrecking yard or parts store.
Quote:
|
Re: Power Brake Booster Adapter Bracket
2 Attachment(s)
I have 2 of these '67-'72 booster brackets that are zinc plated. The price is the same as the powder coated version which is $61.50 plus $11.65 for shipping.
|
Re: Power Brake Booster Adapter Bracket
One zinc plated booster bracket left :)
|
Re: Power Brake Booster Adapter Bracket
Does this set up work for disk/disk? I want to use the same power booster as all of you are talking about. I am running a ls5.3. w/ a 4l60e.
|
Re: Power Brake Booster Adapter Bracket
This booster bracket will work for all types of braking systems. You will just need to use a master cylinder and prop valve for a disc/disc system with the booster that you select. Some guys recommend a dual diaphram for a disc/disc system.
|
Re: Power Brake Booster Adapter Bracket
Getting ready to install a setup on my 70 LB stepside. I'll post pics as I get it done and let everyone know how the conversion goes. Got my brackets from Captainfab for the Impala rear disc setup and the booter bracket as well. It's 4 wheel manual drum now. Got a pair of 2 1/2" drop spindles that'll be here tomorrow. Gonna use a Wilwood adjustable proportioning valve.
|
Re: Power Brake Booster Adapter Bracket
Sending PM for a pair of brackets
|
Re: Power Brake Booster Adapter Bracket
I still have one zinc plated booster bracket.
|
Re: Power Brake Booster Adapter Bracket
Subscribed
What do you have available? |
Re: Power Brake Booster Adapter Bracket
I still have the zinc plated booster bracket as well as several in bare steel. I am currently out of the satin black powder coated booster brackets but I will be getting more done.
Quote:
|
Re: Power Brake Booster Adapter Bracket
Quote:
What would the cost for bare steel shipped to 77095? Thanks |
Re: Power Brake Booster Adapter Bracket
The total price for the zinc plated booster bracket is the same as in post #110 above.........$73.15. The price for the bare steel booster bracket is the same as in post #1 of this thread.......$66.65.
Quote:
|
Re: Power Brake Booster Adapter Bracket
I have a i6 250 and have read that I will need an offset breather if I go with a booster. If I use your bracket will my factory breather clear.
|
Re: Power Brake Booster Adapter Bracket
I haven't received any feedback nor any personal experience with a I6 and my booster bracket. I made some measurements and I think that if you used a 9" diameter booster, it would fit with your stock air cleaner. If you have power steering, you could always go hydroboost.
Quote:
|
Re: Power Brake Booster Adapter Bracket
Do you have this bracket with a hydraulic clutch bracket?
|
Re: Power Brake Booster Adapter Bracket
You must not have received the PM I sent you last night?
Yes I do make a hydraulic clutch conversion for the '67-'72 trucks. I do not have a pic of it on this computer. I can get a pic tomorrow when I am at my shop. It is basically the same as what I make for the '60-'62's and '63-'66's. The price is the same as well. Quote:
|
Re: Power Brake Booster Adapter Bracket
Thanks!
|
All times are GMT -4. The time now is 04:59 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com