The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevy/GMC Suburbans & Panels Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=38)

- - How about some pics of lowered 2wd (https://67-72chevytrucks.com/vboard/showthread.php?t=431073)

Re: How about some pics of lowered 2wd

Just did some work on mine. Got the front nice and low, I think the rear may need to come down a couple more inches. No bags, daily driver.

Re: How about some pics of lowered 2wd

Thats a good stance you have there, looks good.

Re: How about some pics of lowered 2wd

Here is a newer picture of my suburban.

Re: How about some pics of lowered 2wd

Here is my Burb with some new Ridetech & Accuair. Its pretty dirty in this pic. This is in the showroom at Extreme Motorsports in Brentwood, Ca. where I had the work done. It's aired out on the bumps w/20's.

Re: How about some pics of lowered 2wd

Here's a couple more.

Re: How about some pics of lowered 2wd

I'm not crazy about the hood hinges but everything else looks great to me! Very clean, simple and understated. I love the look!

I would love to see more of this rig. How about some side shots with the hood closed? Interior?

THANKS

Quote:

Originally Posted by BLP (Post 6552094)

Here is a newer picture of my suburban.

Re: How about some pics of lowered 2wd

Not much of a drop. (2") front and back.

Re: How about some pics of lowered 2wd

I kind of have a lime green and black theme, my wife picked it. Here is an interior shot. It in in progress. Needs carpet and a lot of other stuff.

Re: How about some pics of lowered 2wd

This thread needs a sticky

Re: How about some pics of lowered 2wd

I'm ready to pull the torched springs out of my Burb and put in drop springs. Anybody that's used the 4 and/or 5 inch drops have any advise for me? I want it low but I'm not up for cutting the frame or air bags.

I need a better ride than the sagged stockers are giving me- pounding and jolting over every bump and road flaw is aggravating my back. Feels like I need to wear a kidney belt to drive it some days.. I just don't want to get 5" springs and find out that I need other mods without knowing first.
Thanks a bunch guys- I appreciate it

Re: How about some pics of lowered 2wd

I know that suburban! Congrats on the purchase.

Re: How about some pics of lowered 2wd

Quote:

Originally Posted by HSRACER (Post 7111899)

Just got this one

Nice! Can you tell us about it? Didn't you just sell a nice one?

Re: How about some pics of lowered 2wd

Quote:

Originally Posted by Advanced Design (Post 7112884)

Nice! Can you tell us about it? Didn't you just sell a nice one?

Scott story had a build thread on it called "Tina, a patinaed burb". Check it out.

Yes I sold a completely restored 1972 and a 1964 shell so we could purchase this one.

Re: How about some pics of lowered 2wd

Any changes you plan on making to it?

Re: How about some pics of lowered 2wd

Quote:

Originally Posted by HSRACER (Post 7113412)

Scott story had a build thread on it called "Tina, a patinaed burb". Check it out.

Yes I sold a completely restored 1972 and a 1964 shell so we could purchase this one.

Thanks! That is a nice Burb. Enjoyed the build.
http://67-72chevytrucks.com/vboard/s...d.php?t=526670

Re: How about some pics of lowered 2wd

Quote:

Originally Posted by BLP (Post 6590940)

That is a nice suburban what drop kit and rims did you use.

Re: How about some pics of lowered 2wd

Adding mine to the mix

Re: How about some pics of lowered 2wd

Quote:

Originally Posted by AzDon (Post 4308091)

Here's mine:

What drop do you have on that beast

Re: How about some pics of lowered 2wd

Quote:

Originally Posted by sierragrande71 (Post 7385622)

And one last one.

Did you go with air ride. I'm trying to figure out if I want to do the 3/5 or 4/6 drop.