Re: My crewcab 4x4 cummins project
 

That's still col as heck even if you didn't do it! I don't think I have the patience to do it personally. I'd go broke on ruined paint. :lol:

Re: My crewcab 4x4 cummins project
 

Yeah I'm quite happy with the airbrush so far always wanted to learn... But body and paint is the extent of my knowledge as of now
Posted via Mobile Device

Re: My crewcab 4x4 cummins project
 

well its time to get back atter its in the shop and i already cut the frame in half haha.... hopefully tomorrow i can drag my welder down and get it welded back together..gonna have to get my new drive shafts resized but no big deal

Re: My crewcab 4x4 cummins project
 

Looking good man.

Re: My crewcab 4x4 cummins project
 

Looks good. I like the bumpers.

Re: My crewcab 4x4 cummins project
 

well i got all the welding done today and the box set on ... very happy now that i might be able to park it in a parking lot one day haha

Re: My crewcab 4x4 cummins project
 

:metal::metal::metal:
Posted via Mobile Device

Re: My crewcab 4x4 cummins project
 

nice truck man do u still have the old cab.

Re: My crewcab 4x4 cummins project
 

Great work on the SWB Conversion!

Re: My crewcab 4x4 cummins project
 

ey thanks for the checkin out my truck... i dont have the old cab ... i scapped it, it had rust in places ive never seen rust before... didnt help than the front drip rails were gone with the holes left open

Re: My crewcab 4x4 cummins project
 

Ok still nice truck Though I just can't figure out y every one cuts these onld trucks up crewcab long box is way to go in my opinnion and sent it to the sky so that it looks good
Posted via Mobile Device

Re: My crewcab 4x4 cummins project
 

Yeah the original plan was to leave it alone as a long box but long box trucks have always looked funny to me unless there a dually but I ha a dually project an that went away. I also thought about just taking 10" ish out of the front of the long box ...again just didn't want the extra work
Posted via Mobile Device

Re: My crewcab 4x4 cummins project
 

well ether way its a great looking truck wish i could afford a 12v cummins for my truck

Re: My crewcab 4x4 cummins project
 

Not sure what prices are like down there but I got my engine from a wreckers about 3 hrs from here and the motor has what would be 125 000 miles, got it complete with all accessories , rad ,intercooler all the hoses and wiring harness for 2500 which is a screaming deal. Originally I wanted to go duramax but it came down to cost and ability to work on it
Posted via Mobile Device

Re: My crewcab 4x4 cummins project
 

I agree, I originally wanted a duramax for my truck the cost was prohibitive. Then one morning I was strolling through the local craigslist and to my surprise there was a half parted out 93 dodge with 90k on the odo that still had axles and more importantly the cummins..$800 it was at my house. After selling everything else I ended up making a profit, and getting the engine.

Re: My crewcab 4x4 cummins project
 

Agreed some times a killer deal comes up my buddy got a 92 one ton dually from a farmer that hated the truck with 80k on it for 1500 bucks n did a body swap. Put a rust old Chevy crew cab and a deck on it and called it good... Better for the kids n hauls the quads n camper like nothin said he has 3000 into the truck n drives it regularly
Posted via Mobile Device

Re: My crewcab 4x4 cummins project
 

I'm with you guys. I have wanted to do a Dmax swap for a while, but I never seem to find any affordable. And I have plenty of cummins parts, so why switch up? :lol:

Re: My crewcab 4x4 cummins project
 

got a bit more work done the last few days, got the front fenders and inner fenders on...some tweeking to do yet ...damn aftermarket junk... got two new rear doors coming and some misc odds and ends... started fabbing up some steps still have to build the mounts and put tops and the tubes and a final burn in its all just tacked together as of now... also picked up bezels and grill trim off a 76 that i did a test fit on... again damn aftermarket fenders...still have to trim up the front bumper and raise in because of my last minute slight body lift... my blazer tank also showed up and im going to run a tube just behind the diff threw the frame for shock mounts/ tank mount.

Re: My crewcab 4x4 cummins project
 

4x4 guys... anyone know of any online stores with a good selection or diff components.. ring n pintions, carriers/lockers, steering shocks?

Re: My crewcab 4x4 cummins project
 

i believe theres a place called RANDYS RING AND PINION in washington, online too:metal:

Re: My crewcab 4x4 cummins project
 

This is a cool build. Bumpers are cool.

Re: My crewcab 4x4 cummins project
 

got a little more done on the truck... got the blazer tank in and the shocks relocated to behind the diff no picture of the shock set up yet... and i still have to bend up a strap for the top of the fuel tank.... ive been so tied up with helping a good friend of mine with his corvette the last two months that it was a truck day today... also got my bike all put back together.... turned out awesome...

Re: My crewcab 4x4 cummins project
 

and the bike all finished up...

Re: My crewcab 4x4 cummins project
 

WOW!! You got lucky on that buy, In Alaska, there are 2 Cummins for sale on CL at the moment, one is in a truck and it is $3500 and one is just for the motor and it is $3000, u southerners are making me drool!!!

And this build is turning out awesome, love the bumpers! I need to find another crew to go really extreme on!

Re: My crewcab 4x4 cummins project
 

well i got the paint on the cab cleared off and pulled the rest of the dents... just waiting for a nice day so i can roll it outside n blast the door jams. small rust hole on the front window lip to attend to.