Re: Parting out 72 GMC K20 4x4 350-TH350
 

Those look great!!

Re: Parting out 72 GMC K20 4x4 350-TH350
 

Tom received parts yesterday look great, thanks

Re: Parting out 72 GMC K20 4x4 350-TH350
 

Pm sent. Need tracking info..

Re: Parting out 72 GMC K20 4x4 350-TH350
 

Tom, got the gmc letters in the mail today. They look awesome pleasure doing business with ya!

Re: Parting out 72 GMC K20 4x4 350-TH350
 

Tom, thanks for texting me the pictures, no more needed. Let me know about #7. I think since the 4x4 engines sits back further the TH350 fill tubes are longer, than 4x2s.

1) 4x4 fan shroud $85
2) NP205 bottom rubber mount set $27.50
3) NP205 side mount kit $45
4) 2x radio mount cups and nuts $5 each - $10
5) Drive leaf spring rear safety stop bracket and hardware $5
6) Coiled covered oil pressure line for $5
7) 4x4 turbo hyrda-matic 350 dip stick and fill tube (34" long) $25

I wonder how much it would cost to ship that NP205 to GA 30005? I'm tempted.

Thanks
Jim

Re: Parting out 72 GMC K20 4x4 350-TH350
 

Hello Tom,

Payment sent and recieved 30 Jan 2014, I hope you have not forgotten about me.

thank you,

casey

Re: Parting out 72 GMC K20 4x4 350-TH350
 

Casey, no I haven't. Hoped to pull the cables last week but we got hit with a snow storm and my trucks had 18" of snow between them. The snow has finally melted away. I'll be able to ship them tomorrow. Thanks, Tom

Re: Parting out 72 GMC K20 4x4 350-TH350
 

Do you still have the black auto column? If so I will take it. Also looking for some good defrost vents and standard heater cables and a good v 8 engine harness. Lmk what you have thanks, harold

Re: Parting out 72 GMC K20 4x4 350-TH350
 

I am looking for the the pieces that hold the rear end up and the U bolts go through them and the nuts tighten up against it there are 2 per truck and are heavy cast metal. Shipped to 48872. Thanks

Re: Parting out 72 GMC K20 4x4 350-TH350
 

Harold, Yes on the column, vents 12.50, and cables 12.50. No harnesses that don't have issues.
Yes I have them. You need them for a K20? I have them either way. 25.00 plus
11.00 shipping.

Thanks, Tom

Re: Parting out 72 GMC K20 4x4 350-TH350
 

Hey Tom, I have a 72 C10 V8/auto and am looking for a fan shroud and the shift lever on the turbo 350. I live in Virginia 22435 and would make payment with paypal. Pictures would be great along with price + shipping. Thanks.....Roland

Re: Parting out 72 GMC K20 4x4 350-TH350
 

I will take column and vents, just picked up harness off flea bay and cables from another member, pm me Paypal thank you, harold

Re: Parting out 72 GMC K20 4x4 350-TH350
 

OLEBEATER Roland, What engine size? The sbc is different between AC and non AC. bbc are all the same. I have all of them reguardless. Let me know which one and I'll get you a price. I do not have the bracket that bolts to the trans separate from a complete shift linkage assy.

71 super Harold, I'll get a shipping cost Monday on the column and send PM then. BTW you were the first and maybe the only one that responded to my very first thread years ago. You sent me PM reguarding it and for some reason I have saved the PM for all these years.
Thanks guys, Tom

Re: Parting out 72 GMC K20 4x4 350-TH350
 

Hey Tom, 350 and no AC. How much for a complete shift linkage then? Thanks

Re: Parting out 72 GMC K20 4x4 350-TH350
 

Ok..40.00 on the shroud and 40.00 on the complete shift linkage. I can get shipping cost tomorrow if this works for you. Thanks, Tom

Re: Parting out 72 GMC K20 4x4 350-TH350
 

Tom, I wanted to check in with you, any luck locating a 34" TH350 dipstick? Also, what do you think that NP205 would cost to ship to 30005? We are set on items 1-6 so depending on my two questions, we may be ready to ship.

Thanks
Jim

Re: Parting out 72 GMC K20 4x4 350-TH350
 

Tom, $40 is good for the shroud, can you send a picture of it with the total cost. I'll skip on the shift lever assembly for now. Thanks............Roland

Re: Parting out 72 GMC K20 4x4 350-TH350
 

Tom, got my parts last week, they look great! Thank you again.

Re: Parting out 72 GMC K20 4x4 350-TH350
 

JimH2828 Jim, I checked on the tcase without the adapter bolted to it and it weights (with a wooden box) 145lbs (UPS max is 150lbs) which is 119.36 shipping. The adapter with the coupler weights 25lbs with packaging which is 32.68. Did you want the stick? If you buy both I'll throw it in. I could possibly ship the adapter with the shroud but that makes me a bit nervous on damaging the shroud and other parts. The box for the shroud and other parts has to be kept at a minimun to avoid over size charges. I'll get pics of the parts we talked about on the phone in few.

OLEBEATER, Yes I can. It will be a day or so because I have to pull it.

musclecarfreak Todd, Your welcome. Glad you like them.

Thanks Guys, Tom

Re: Parting out 72 GMC K20 4x4 350-TH350
 

Do you have 15" 6 lug disc brake steel wheels? If so how much shipped to Indianapolis, IN 46250?

Re: Parting out 72 GMC K20 4x4 350-TH350
 

I'm interested in this. Do you have a picture available? Thanks.

Re: Parting out 72 GMC K20 4x4 350-TH350
 

Received my shroud, very satisfied! Thanks, Randy?:metal:

Re: Parting out 72 GMC K20 4x4 350-TH350
 

Yes, how many do you want?
I'll post pics later tonight.
Glad you like it!

Thanks Guys, Tom

Re: Parting out 72 GMC K20 4x4 350-TH350
 

Pics of the A/C suite case assy. It has been priced less the hoses. There is some surface rust on the back tins. It's not perfect but very nice considering the age. Thanks, Tom

Re: Parting out 72 GMC K20 4x4 350-TH350
 

No rush Tom, thanks.