Re: Project Reno - 72 cheyenne rebuild
Quote:
|
Re: Project Reno - 72 cheyenne rebuild
Can't ya pull out the distributor and prime the engine by turning the oil pump with a drill motor? I wouldn't do WD-40 as its not a lubricant its a water displacement product, a small squirt of motor oil wouldn't hurt i wouldn't think.
|
Re: Project Reno - 72 cheyenne rebuild
Quote:
Should be firing up today!! I am pumped as this is another step in the right direction. There are a lot of weatherpack resources on the inter web, but I needed a connector that could handle 10 gauge wire. I used terminal supply. http://terminalsupplyco.com/Connectors.aspx It was pretty cheap at $13 for all. They have about any kind of connector you could want. |
Re: Project Reno - 72 cheyenne rebuild
Quote:
Thanks for your input about WD40 Chris |
Re: Project Reno - 72 cheyenne rebuild
1 Attachment(s)
Quote:
Attachment 1153682 This allows you to paste in a web link from snapfish or other photo site with the address of the picture. Just delete what is in the box when it pops up and paste in your link. this enables you to insert links between text lines. Does that make sense? Good luck! I think you can also find some info on this in the welcome area forum. Chris |
Re: Project Reno - 72 cheyenne rebuild
While waiting for the little lady to arrive at the garage to video the inaugural starting of the motor, I worked on a heat shield for the clutch slave cylinder.
http://images3a.snapfish.com/2323232...49634%3Bnu0mrj http://images2.snapfish.com/23232323...49334%3Bnu0mrj Installation worked out just fine. http://images3a.snapfish.com/2323232...49434%3Bnu0mrj Finally she arrived and we had a startup ceremony. Link for video below http://youtu.be/GT4Q506dtj4 Now that the chassis is complete and metal work done on the bed. I am running out of stuff to fix. I am going to try and rebuild the e-brake mechanism. The small torsion spring inside broke when it was being sand blasted. We'll see if I can pull that back together. Don't want to fork over cash for a new one. Now if that damn bodywork would get moving. |
Re: Project Reno - 72 cheyenne rebuild
That's awesome! So exciting to hear it run!
|
Re: Project Reno - 72 cheyenne rebuild
Quote:
Chris |
Re: Project Reno - 72 cheyenne rebuild
Some minor progress. Since the body shop has all but halted my build, I am now tweaking stuff that bothers me. I was having some clearance issues with the radiator shroud and steering box so had the shroud corners cut and welded.
http://images2.snapfish.com/23232323...77834%3Bnu0mrj http://images2.snapfish.com/23232323...77934%3Bnu0mrj I purchased some temp wrap to protect the o2 sensor wires as they are pretty close to the headers. http://images3a.snapfish.com/2323232...77534%3Bnu0mrj I also realized that when I made my heat shield for the slave cylinder, adjustment wasn't accessible from underneath the truck. So I removed and carved out some more metal so it can now be adjusted from underneath. http://images3a.snapfish.com/2323232...%3B25%3Aot1lsi I picked up some flowmaster ball and socket exhaust fittings for my headers and plan to weld those on at some point. http://images2.snapfish.com/23232323...%3A25%3Aot1lsi Now if i could only figure a way to cover the clutch fork. Stock boots just don't do it. Tolerance it too tight. http://images2.snapfish.com/23232323...77634%3Bnu0mrj Last but not least. I ran the motor today for about 20 minutes to make sure the fan cycled on and off. Everything is working flawlessly. I did notice after shutting her down that my oil gauge sending unit is leaking. Damn it. More to come and hopefully it will be a finished cab. |
Re: Project Reno - 72 cheyenne rebuild
nice build!!!
|
Re: Project Reno - 72 cheyenne rebuild
Thanks Sir Fisher!
|
Re: Project Reno - 72 cheyenne rebuild
We have filler! Went by the body shop today to check on progress. much to my surprise, they are pretty far along on the cab. Should be in primer soon.
http://images2.snapfish.com/23232323...%3C25%3Aot1lsi They said they are getting about 5 hours a week in on it between jobs. http://images2.snapfish.com/23232323...83325%3Aot1lsi At least there is progress. |
Re: Project Reno - 72 cheyenne rebuild
Huh.... Now you'll probably be on the road before me !!! "LOL"
Gary |
Re: Project Reno - 72 cheyenne rebuild
Nice! Sure wish i had about 7-10 G's ( i have no real idea how much it should cost) to hire a body shop myself!
|
Re: Project Reno - 72 cheyenne rebuild
Yes another nice build, cant wait to see paint on the body and assembled.
|
Re: Project Reno - 72 cheyenne rebuild
Looks great.. Can't wait to see it with paint.
|
Re: Project Reno - 72 cheyenne rebuild
Quote:
I am cautiously optimistic, but have been here Before. Feel like a broken record with this body Shop stuff. If I could just get the cab back I could Get the truck driving, braking, shifting and partially Wired. So, we'll see. Chris |
Re: Project Reno - 72 cheyenne rebuild
Quote:
But do not. The body guy gave me great numbers. So, I doubled it and think it is still doable. Lol |
Re: Project Reno - 72 cheyenne rebuild
Quote:
|
Re: Project Reno - 72 cheyenne rebuild
Quote:
Like a distant memory. Probably itchin to start Your next project Chris |
Re: Project Reno - 72 cheyenne rebuild
Quote:
Gary |
Re: Project Reno - 72 cheyenne rebuild
Update!! Happy New Year gang!
Well, still waiting on the body shop for my cab. Yup been slow goin and totally shut down my progress. It is pretty cold now and until I have the cab, really no reason to freeze my ass off. I am yet again very frustrated with this body shop thing. I just don't get it…….. I did fit the truck bed to the frame and checked clearances for my fuel filler neck and looks like things are going to line up perfect. The filler door and neck that was fabbed into the bed is from an F100 so it's a filler/vent combo neck. I think I will just take the vent line from aluminum tank and put a filter on it since it doesn't need to be attached to anything. Hopefully 2014 will be the year to actually be driving this thing. I just can't imagine why that wouldn't be the case. So, hopefully more to come soon. Wish me luck!! Chris |
Re: Project Reno - 72 cheyenne rebuild
UPDATE - Oh the horror!
Stopped by the ol'e body shop last week hoping to see the truck in primer. Nope! It hadn't been touched since the holidays. So. I decided since it has been nearly 8 months since I brought my cab to them, and considering that I still have a bed, doors, hood, and front clip yet to be painted, it's time to go. Yes, I realize that these things take time but F' them. So, I got a lead from another restorer about a guy who works from his home. I was informed that I would have to wait a while, but that once my time came up in line, my truck would be the only thing he would be working on. Sounds good to me I say. After a few calls I was set up. So staring in March, I will begin hauling my truck piece by piece over to his shop. On top of all this I have back surgery for a herniated disc coming up. Bummer! Timing is everything. More to come... |
Re: Project Reno - 72 cheyenne rebuild
Too bad about the body shop putting your project aside, seems to be a common issue with a lot of people on this board. 8 months is a joke. But still good to see the updates and great progress coming along and being able to start it for the first time is a great milestone. This project is inspiration for others following along.
|
Re: Project Reno - 72 cheyenne rebuild
UPDATE!
Well after a year and a half of suffering from sciatic pain, I finally got back surgery. Bummer! So for the last 6 weeks I have been hobbling around waiting for things to heal up. Now I'm feeling 100% better and ready to get cracking on this truck again. So with that out of the way… "Operation body shop," has now reached a new mile stone, my 4th body shop! What the… in order to get this thing done before 2017 I have decided to go the way of specialists. So I am now using a metal and body guy as my first stop, then a painter only for the second stop. The cab, hood, doors, fenders and cowl arrived at the painter on friday. Picking paint on Monday and this week the bed and tailgate go to the body guy for a little filler work. http://images2.snapfish.com/23232323...%3B25%3Aot1lsi So, in anticipation of the paint being done some time this year (Lol), I started rebuilding my vent windows. I read and watched a few tutorials, but all in all seemed pretty straight forward. I did not buy the vent window rebuild kit. I instead used steel pop rivets and hammered them flat. The result was pretty strong. LMC rubber was decent quality and fit. http://images2.snapfish.com/23232323...%3A25%3Aot1lsi I'll post some more pictures when I do the passengers side. Next up is the window regulators. Just gonna clean them up and lube. http://images2.snapfish.com/23232323...A5925%3Aot1lsi Now that the weather is warm again and once I get the cab back, all hell will break loose on further work. Stay tuned... |
All times are GMT -4. The time now is 03:55 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com