Re: Recreating Dad's 62 C10
 

Thanks for the help! My dad ordered a joint last week. We will post pics once it arrives and we put it on!

Re: Recreating Dad's 62 C10
 

Update time: Dad has been having a lot of trouble with rust in the gas tank. Was running two fuel filters but would drive about a mile and the thing would die. Solution...need a new tank. While we were dove hunting out in west tx this weekend, i found a almost new behind the seat LMC tank with a fuel sender. Inside of the tank looked brand new! got the setup for $65 bucks. Not bad at all. We will eventually put a tank under the bed, but 65 bucks for a temporary cheap fix isn't bad. Anyway, dad said it was a "fun time" getting the tank in by himself. haha

Here are the pics.

Also, the truck is running great now. No trash in the tank.

Re: Recreating Dad's 62 C10
 

new tank has undercoat sprayed on it for a cleaner look. So second pic is the new one installed and the carpet cleaned haha

Re: Recreating Dad's 62 C10
 

Also, dad bought the steering u joint but it was the wrong size. Ordered another one. Hopefully in this week as well as the window regulator that is on back order at LMC.

Re: Recreating Dad's 62 C10
 

Below are some pics of the new steering wheel installed. We will eventually upgrade to a nicer wheel once we swap the column. Baby steps.

Check out how small the previous wheel was. Much needed upgrade.

Dad also picked up new plugs, wires, and degreaser. Next project is cleaning up the engine bay a bit.

Pic also gives a little closer view of the interior. Pretty clean in there. Except PO cut the dash for a radio.... :waah:

Re: Recreating Dad's 62 C10
 

Here is the small wheel and the B&M Shifter that came in the truck when dad bough tit.

Re: Recreating Dad's 62 C10
 

Headed to my first car show tomorrow will post pictures later

Re: Recreating Dad's 62 C10
 

Few pics from the show.

Re: Recreating Dad's 62 C10
 

Did the swap meet this weekend at Texas Motor Speedway, found some great deals on some parts i needed. Met up with a guy named Tim on Sunday who helped me with a door, fenders, hood and some other parts. It was great talking with him, thanks RDancher for the hook up. My son will post pictures of my weekend score.:chevy:

Re: Recreating Dad's 62 C10
 

Here are some pics of the finds. Dad also got hood light inserts, vintage gun rack, window cranks, and short bed steps that i dont have pics of. But...pretty good finds.

Re: Recreating Dad's 62 C10
 

You are very welcome. Tim's a good guy. :chevy:

Re: Recreating Dad's 62 C10
 

Small update. This weekend dad changed our the cap and wires, put on his new mirrors, hood inserts, cab molding and door latch on the passenger side.

Plan next is to pick up his passenger door he purchased after the rain stops in Texas and get that on. Also will pull out the hood and fenders he bought and start the body work on those.

Re: Recreating Dad's 62 C10
 

help i'm smelling gas real bad,
How can i get rid of the gas smell from inside the cab of my 1962 pick up without relocating the tank? would covering the tank with a carpet drape work?
please advise

Re: Recreating Dad's 62 C10
 

It could be the gasket under the sending unit

Re: Recreating Dad's 62 C10
 

i ordered one from LMC today, i also ordered a new filler neck rubber hose and gas cap.:flagw: thanks for the input i'll post if that fixes it :flagw:

Re: Recreating Dad's 62 C10
 

i replaced the sending unit gasket and it seems to have helped a bunch. Thanks for the advise.

Re: Recreating Dad's 62 C10
 

Glad that fixed it, now to put some miles on it :metal:

Re: Recreating Dad's 62 C10
 

Got my heater core installed, new thermostat and gasket, and changed out the leaking exhaust gaskets Saturday morning thanks for the help from my son Luke.

Re: Recreating Dad's 62 C10
 

Many things have happened...dad painted his rear bumper, installed new taillights, bought a front bumper. He will be painting the front end white before next week. hoep to see y'all at C10 Nationals!

Re: Recreating Dad's 62 C10
 

Well, C10 Nationals was a blast. Dad was able to take his 62 out but my 81 sprung a bad leak on the kickdown cable and i couldnt get it fixed in time...

Here a few photos from C10 Nationals and the "patina" bed bars dad put on.

Oh...and a burnout photo from a recent cruise night.

Re: Recreating Dad's 62 C10
 

Update, we replaced the driver side fender with a better used one. Biggest update, my dad's buddy scored another 62 rust free and straight panels. In a couple weeks we will begin swapping the panels out. i will take lots of pictures.

Oh...and its s BBW!

Here is a pic of the 62, 75, and my 81 from the weekend.