Re: maxxy's 81 bagged c10 build
Can anyone verify that these are NOT drop spindles?
http://i901.photobucket.com/albums/a...y/ce9ce47d.jpg Posted via Mobile Device |
Re: maxxy's 81 bagged c10 build
I'd say not...see how the shaft is closer to the bottom ball joint. if they were dropped the shaft would be up more in the middle of the spindle.
|
Re: maxxy's 81 bagged c10 build
Ok cool. See the thing is I want to get a little lower and the best way to do that (without a dropmember or a Z) and get the most drop is with a 3" spindle. And I was just hoping that it didn't have them so I wasn't stuck being so high.
Does a 3" spindle mean I'm going to get a full 3" lower? Posted via Mobile Device |
Re: maxxy's 81 bagged c10 build
Ya, whatever the drop you want to do is how much it will lower it.
|
Re: maxxy's 81 bagged c10 build
1 Attachment(s)
3" bell tech's
|
Re: maxxy's 81 bagged c10 build
Mooseknuckles would you mind telling me where you bought those from and how much did they cost?
Posted via Mobile Device |
Re: maxxy's 81 bagged c10 build
local Benson's Auto Parts.....with tax, just under $400 cdn.
|
Re: maxxy's 81 bagged c10 build
Looks good, cant wait to see it put together
|
Re: maxxy's 81 bagged c10 build
Max,
do you have 1" or 1 1/4" front rotors? these are for the 1 1/4" rotors, and is what I have on my crew....nice price also http://static.summitracing.com/globa...s2045h-3_w.jpg http://www.summitracing.com/parts/DJM-DS2045H-3/ |
Re: maxxy's 81 bagged c10 build
Those are a good price, too bad mine is a 1" rotor.
Posted via Mobile Device |
Re: maxxy's 81 bagged c10 build
1 Attachment(s)
maxxy...here is a pic, you can see just under the outer tie rod end to the ball joint is where I had to grind the lip off on both sides of the controll arm. The wheels really only rubbed when making sharp turns.
|
Re: maxxy's 81 bagged c10 build
|
Re: maxxy's 81 bagged c10 build
Looks cool!!
Where did you find that hood? Glass or steel? I want one!! :lol: Posted via Mobile Device |
Re: maxxy's 81 bagged c10 build
Its fiberglass. I'd rather have a steel but i'll take what i can get. lol
See here's the story, my dad, a wholesale car dealer, and he does a little bit of public sales, sold this squarebody suburban to an older woman who needed a car, and she was saying she didnt really care for the hood because it was kind of obstructive to her vision, so i told her i could fix that problem, by trading my stock hood for hers, and while i was at it i asked what would it take to trade for her phantom grille, and she told me i could trade out anything on her burb as long as it still ran and looked ok. So I ended up with a cowl hood, a phantom grille (which needs painted or something), and an entire interior real billet kit (including dash bezel, dash trim, billet pedals, and front and rear door trim) |
Re: maxxy's 81 bagged c10 build
truck is looking great!! nice dealing on the parts too
|
Re: maxxy's 81 bagged c10 build
wow!! that was a real score there good job. i like your build bud. I have thought about baggs but I cant bring myself to cut my bed lol
|
Re: maxxy's 81 bagged c10 build
nice score!!....swindled the poor old lady out of her billet grill and cowl hood. lol.
|
Re: maxxy's 81 bagged c10 build
Quote:
Quote:
|
Re: maxxy's 81 bagged c10 build
There is a really nice bed floor at pull a part
Posted via Mobile Device |
Re: maxxy's 81 bagged c10 build
Ok I got a little done today. I had to modify my upper wishbone (hopefully last mod with rear susp) I realized my bag mounts wouldn't fit without being super close so I redid wishbone and narrowed it. I am glad I redid it because on a rod end I found out it wasn't perfectly square, which would've caused problems later.
But here's what it is now, and hopefully what it will stay like. http://i901.photobucket.com/albums/a...y/8d3133d0.jpg Posted via Mobile Device |
Re: maxxy's 81 bagged c10 build
Man dude. Looks good! I wish you'd help me build one of these.. how much $$ would it take doing it yourself like your doing? P.s. you go to Washington? I graduated there..do you know Stephanie Atkinson?
|
Re: maxxy's 81 bagged c10 build
Thanks man. I have probably around $150 bucks into it. I got
a 24ft stick of 2x2x1/4 in okc for 50ish. Rod ends and bushings from QAR (*****************) for 40ish And link mounts for 60ish. Yeah I know Stephanie. We're both juniors. Posted via Mobile Device |
Re: maxxy's 81 bagged c10 build
That's cool you know my sister. Man your gonna have to help me with mine dude that is awesome. We need to meet up.
|
Re: maxxy's 81 bagged c10 build
Ok man. I think I slightly remember who you are. You wnt remember me because I was like in junior high when you graduated. Didn't you just do a lowering kit? And you already want to go lower? Haha
Posted via Mobile Device |
Re: maxxy's 81 bagged c10 build
Haha yes . I'd know u if I saw you I bet..and yea when i got mine it had one leaf spring on each side in the back and the front was higher so I cut the springs and the ride was horrible. I'd slam it but I don't have 2000 to do it so I went with the 5/5 kit.. I just don't think it is low enough..and yea I have that bed at my parents
|
All times are GMT -4. The time now is 07:07 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com