Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

I'm in....
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

cant wait to see what you come up with for it.

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

im scribed!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Thanks guys, well i got the interior pretty much gutted this week....found a little rust , couple small parts right at the very back of the tub by the gate then on each side of the riser where the floor steps up behind the front seats and then when i pulled the rubber off from around the drivers rocker a couple spots of that lip are gone so i guess i will replace the drivers rocker panel and seeing that there is no seams i am going have to look and see what you guys have found is the best way to replace these ! I also cleaned up the transmission and transfer case to put it on Craigslist

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Was there a pack of wild dogs living in there??!!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

LOL...it looks like it ! it was NASTY ! the transmission and transfer case was in the back and of course the carpet and everything was soaked with trans fluid !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Yummy! Did you find any quarters in there? Every little bit helps :lol:

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

not one !! LOL, they must have cleaned it out !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

posted up all of the parts that are coming off on the parts board http://67-72chevytrucks.com/vboard/s...d.php?t=554613

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

I tuned in REAL late on Cloud9. It has only be 3 days since you started this and it is already 5 pages and 109 posts.

Looking forward to this one. I have always liked the Blazers.

I got a picture of a blazer interior that was laid out that reminded me of the interior in Cloud9 just a different color. When I can get it downloaded I will post it up....

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

looking forward to seeing it , thanks man !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Nice progress this weekend Mike.

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Here it is. It was a '75 ish Blazer laid out on Coys. It needed paint but was cool...
http://i266.photobucket.com/albums/i...A3CBF3ABD8.jpg

I did not get a picture of the whole truck for some reason...

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

sweet , i need to see some more pics of what they did in the back with the seat ! Do you have any other pics ?

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

It's blocked up (see pic) and moved forward for sure. I wonder how small of a notch you can get away with?

Remember the rear-facing station wagon seats?...that would be cool!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Hey Mike, when are you going to announce who the mystery sponsor is? Either that, or I'm guessing that someone is going to do a reality show on you while you do your Blazer! I know I'd sure as heck watch!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Plaidzilla!:lol:

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Nice score and sweet project Mike. I have a couple of ideas for you since I see you're going the different and modified look here. On the hood, the 73-80 has a more square body line in the center of it where as the 81-87 comes up to a point. You were saying you wanted to retain the cowl panel seperate from the hood. Now, when you cut the 2 hoods to do this the sheet metal won't want to line up. But, I think you could weld the 2 hoods together and get a steel cowl scoop and then use it as a seam blocker and add looks.

On the rear seat: Place the lower cusion smack on the floor even with your new floor hump. Use the top of the floor hump as half of the lower portion of the seat frame and then add a back to it. This way you might try to still keep it as low as you can without kiddos wacking their heads as much.

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

lOL
Probably Friday, LOL a reality show would be great...carsalesman by day car builder by night !
great ideas !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Awesome Mike I'm gonna keep tabs on this build!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Thanks man, should be some real progress starting very soon !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

That's the only picture I have of it. Sorry...
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

.... just thought I'd come meet everyone that my husband is in an "online relationship" with... ;)

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

LOL...arent you the funny one !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

can i get a moderator to help put my wifes build thread link at the bottom of her posts ?