The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 5 of 11 1234 5 678910 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   WA NEW: 3/4T-1T Brake Booster System-Only Here! Finally! (https://67-72chevytrucks.com/vboard/showthread.php?t=581862)

k5kev 10-02-2019 08:08 AM
Re: NEW: 3/4T-1T Brake Booster System-Only Here! Finally!
 
Hi Frank,

I need a set up if you have one left or the parts to put one together. Disc/disc prop valve if possible. Thanks, Kevin.

PICKMUP 10-02-2019 08:04 PM
Re: NEW: 3/4T-1T Brake Booster System-Only Here! Finally!
 
[QUOTE=k5kev;8602748]Hi Frank,

I need a set up if you have one left or the parts to put one together. Disc/disc prop valve if possible. Thanks, Kevin.[/QUOTE

Yes, I am building them on a regular basis and have all components in stock. Just let me know if it is going on a 3/4T-1T or 1/2T. Size matters! Thanks, Frank

k5kev 10-02-2019 09:20 PM
Re: NEW: 3/4T-1T Brake Booster System-Only Here! Finally!
 
It’s going in a 72 4x4 blazer, but I want the 3/4-1 ton.

PICKMUP 10-03-2019 03:08 AM
Re: NEW: 3/4T-1T Brake Booster System-Only Here! Finally!
 
Quote:
Originally Posted by k5kev (Post 8603106)
It’s going in a 72 4x4 blazer, but I want the 3/4-1 ton.
Sure. I do those all of the time.

k5kev 10-03-2019 07:24 AM
Re: NEW: 3/4T-1T Brake Booster System-Only Here! Finally!
 
PayPal sent. Thanks.

bmfm64 10-04-2019 05:47 PM
Re: NEW: 3/4T-1T Brake Booster System-Only Here! Finally!
 
Quote:
Originally Posted by PICKMUP (Post 8603204)
Sure. I do those all of the time.
Frank, what is the difference between the 3/4-1 ton vs the 1/2 ton? the brakes are super stiff on my Blazer and I wouldn't mind swapping the booster out to a better one.

PICKMUP 10-04-2019 08:18 PM
Re: NEW: 3/4T-1T Brake Booster System-Only Here! Finally!
 
Quote:
Originally Posted by bmfm64 (Post 8603970)
Frank, what is the difference between the 3/4-1 ton vs the 1/2 ton? the brakes are super stiff on my Blazer and I wouldn't mind swapping the booster out to a better one.
I have a 9"DD that is about 30% more powerful than stock 1/2T and I have these 3/4T-1T systems that are about 50%+ more powerful. These are usually too powerful for a 1/2T unless you are running very big wheels & tires.

bmfm64 10-08-2019 04:38 PM
Re: NEW: 3/4T-1T Brake Booster System-Only Here! Finally!
 
Quote:
Originally Posted by PICKMUP (Post 8604043)
I have a 9"DD that is about 30% more powerful than stock 1/2T and I have these 3/4T-1T systems that are about 50%+ more powerful. These are usually too powerful for a 1/2T unless you are running very big wheels & tires.
Hi Frank- Im running a 20" steel wheel alonmg wiht 35" tires- the tire/wheel combo is pretty heavy. Do you recommend the 1 ton one?

PICKMUP 10-08-2019 10:23 PM
Re: NEW: 3/4T-1T Brake Booster System-Only Here! Finally!
 
Quote:
Originally Posted by bmfm64 (Post 8606238)
Hi Frank- Im running a 20" steel wheel alonmg wiht 35" tires- the tire/wheel combo is pretty heavy. Do you recommend the 1 ton one?
Yes. That will work best. It is almost finished. 4 wheel DB setup. Frank

Andy4639 11-21-2019 07:15 AM
Re: NEW: 3/4T-1T Brake Booster System-Only Here! Finally!
 
Do you have any of the 1/2 ton kits? If so you have a price. Need to get something on my daughter 1/2 ton step side I'm building.
It has 18" wheels all around.:chevy:

68 P.O.S. 11-21-2019 11:46 AM
Re: NEW: 3/4T-1T Brake Booster System-Only Here! Finally!
 
Here you go Andy http://67-72chevytrucks.com/vboard/s...d.php?t=779896 I bought this one from him a few years ago and it works great.

PICKMUP 01-08-2020 05:41 PM
Re: NEW: 3/4T-1T Brake Booster System-Only Here! Finally!
 
2020 PRICES:
[/U]

Slight increase--$25-- to cover extra shipping charges-coming & going (some over $50), bleeder set, prop lock tool, threaded rod.
$350 + $75 S/H/INS

NorCalC20LWB 01-08-2020 08:14 PM
Re: NEW: 3/4T-1T Brake Booster System-Only Here! Finally!
 
Hi Frank, I have a 3/4 ton with disc/drum and a leaky aftermarket prop valve plus very hard/stiff braking. Do you think your setup would be good upgrade for my situation?

Thanks,
Brian

PICKMUP 01-09-2020 12:32 PM
Re: NEW: 3/4T-1T Brake Booster System-Only Here! Finally!
 
Quote:
Originally Posted by NorCalC20LWB (Post 8656720)
Hi Frank, I have a 3/4 ton with disc/drum and a leaky aftermarket prop valve plus very hard/stiff braking. Do you think your setup would be good upgrade for my situation?

Thanks,
Brian
Hard stiff braking sounds like a bad booster. It should only take a light pedal pressure to stop. I always start with a fresh firewall booster/MC set and move out from there to make good brakes. Frank

fishmunger 01-24-2020 12:45 PM
Re: NEW: 3/4T-1T Brake Booster System-Only Here! Finally!
 
Hi,

I have a 72K10 that I want to replace/upgrade the braking system. Its old and I need to tow my boat safely. It's front disc rear drum. It has 35x12.5 tires.

I'm assuming I want the 3/4 or 1 ton booster?

Also, this is a direct bolt in to my existing truck right?

Do you have any in stock currently?

Thank you.

PICKMUP 01-24-2020 06:52 PM
Re: NEW: 3/4T-1T Brake Booster System-Only Here! Finally!
 
Quote:
Originally Posted by fishmunger (Post 8665371)
Hi,

I have a 72K10 that I want to replace/upgrade the braking system. Its old and I need to tow my boat safely. It's front disc rear drum. It has 35x12.5 tires.

I'm assuming I want the 3/4 or 1 ton booster?

Also, this is a direct bolt in to my existing truck right?

Do you have any in stock currently?

Thank you.
I have all new (not rebuilt) components to do a big 3/4T-1T booster with the correct 1/2T MC/PROP for your K10. It is a much more powerful set for bigger tires and a heavier truck load. Direct bolt in, uses OEM lines and OEM style brackets & pedal rod. Frank

JerryIndy2112 01-27-2020 08:52 PM
Re: NEW: 3/4T-1T Brake Booster System-Only Here! Finally!
 
Hey
I am Jerry. I have a '71 one ton. The front brakes are disk, redone last year. This year I found my rear drums were shot. I had to do disk on back. Do you have a set up that would match this system? Is it more expensive. Let me know. I would prefer black, but can paint what ever you have.

Thanks
Jerry

PICKMUP 01-27-2020 10:19 PM
Re: NEW: 3/4T-1T Brake Booster System-Only Here! Finally!
 
Quote:
Originally Posted by JerryIndy2112 (Post 8667425)
Hey
I am Jerry. I have a '71 one ton. The front brakes are disk, redone last year. This year I found my rear drums were shot. I had to do disk on back. Do you have a set up that would match this system? Is it more expensive. Let me know. I would prefer black, but can paint what ever you have.

Thanks
Jerry
Yes. I can build a 1Ton disk/disk system for the same price. It will be black booster & brackets, like those shown on the first pages of this thread. You can pay with PP or CC using the email addy or secure phone # listed on all of my posts. Frank

JerryIndy2112 01-27-2020 10:30 PM
Re: NEW: 3/4T-1T Brake Booster System-Only Here! Finally!
 
Cool,
I can pay on 2/7/20. look forward to getting this on my truck. thanks. I will pay as soon as i can.

Jerry

Willys_MB 02-10-2020 09:19 PM
Re: NEW: 3/4T-1T Brake Booster System-Only Here! Finally!
 
Hi Frank,

Does the booster come with the braces needed to install? I just picked up a 71 3/4 ton front end to swap into my 68 3/4 ton. I need the whole booster assembly as my truck doesn’t have one. I know I need the MC and proportioning valve and that’s why I’m thinking of going your route. Any tips or ideas for other parts I may need?

Thanks!

Willys_MB 02-11-2020 04:03 PM
Re: NEW: 3/4T-1T Brake Booster System-Only Here! Finally!
 
Quote:
Originally Posted by Willys_MB (Post 8676342)
Hi Frank,

Does the booster come with the braces needed to install? I just picked up a 71 3/4 ton front end to swap into my 68 3/4 ton. I need the whole booster assembly as my truck doesn’t have one. I know I need the MC and proportioning valve and that’s why I’m thinking of going your route. Any tips or ideas for other parts I may need?

Thanks!
Not sure if you saw this. You're usually pretty quick to respond, but I've been missing posts a lot without the email notifications. I just thought I'd check in.

Thanks

PICKMUP 02-11-2020 04:24 PM
Re: NEW: 3/4T-1T Brake Booster System-Only Here! Finally!
 
Quote:
Originally Posted by Willys_MB (Post 8676342)
Hi Frank,

Does the booster come with the braces needed to install? I just picked up a 71 3/4 ton front end to swap into my 68 3/4 ton. I need the whole booster assembly as my truck doesn’t have one. I know I need the MC and proportioning valve and that’s why I’m thinking of going your route. Any tips or ideas for other parts I may need?

Thanks!
Look at the first post on this thread. The brackets on the new set are stronger than original. The two extra original braces are not needed or recommended. Frank

PICKMUP 02-11-2020 11:13 PM
Re: NEW: 3/4T-1T Brake Booster System-Only Here! Finally!
 
3/4T Brake Booster Systems are temporarily SOLD OUT.
Waiting for more new boosters to be built.
I will post when ready. You can get on list by posting on here.
Thanks, Frank

Willys_MB 02-12-2020 01:09 AM
Re: NEW: 3/4T-1T Brake Booster System-Only Here! Finally!
 
Quote:
Originally Posted by PICKMUP (Post 8676965)
3/4T Brake Booster Systems are temporarily SOLD OUT.
Waiting for more new boosters to be built.
I will post when ready. You can get on list by posting on here.
Thanks, Frank
Damn, I was getting geared up to buy one. Any idea how long the wait is? I guess I’ll be first in line.

Willys_MB 03-21-2020 01:30 PM
Re: NEW: 3/4T-1T Brake Booster System-Only Here! Finally!
 
PayPal sent per PM saying you have some in stock. $425+3%


All times are GMT -4. The time now is 04:52 PM.
Page 5 of 11 1234 5 678910 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com