The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 5 of 6 1234 5 6
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   OH 72 c30 longhorn parting (https://67-72chevytrucks.com/vboard/showthread.php?t=733702)

rsmarr1982 03-31-2017 07:20 PM
Re: 72 c30 longhorn parting
 
5 Attachment(s)
Quote:
Originally Posted by undertaker72 (Post 7899477)
yes and I know the steering wheel has cracks but I wanted it also , so can you figer that and ship together
Pics

bulky 04-01-2017 08:01 PM
Re: 72 c30 longhorn parting
 
Quote:
Originally Posted by rsmarr1982 (Post 7902054)
Sorry had to take a break from the truck for family things. Battery tray, wiring, junction blocks, fuel switch , washer bottle bracket, filler neck sold to Dave. Dirt's72 I will take pics of fuel line and cluster tonight. Undertaker72 I will get pics of steering will tonight as well. I will accept bulky's offer on the air horn.
PM sent

spitfire980 04-03-2017 06:53 AM
Re: 72 c30 longhorn parting
 
Do you have these?
http://imageshack.com/a/img922/7954/Z7fsLL.jpg

rsmarr1982 04-03-2017 06:47 PM
Re: 72 c30 longhorn parting
 
Quote:
Originally Posted by crossjo (Post 7902378)
Do you have these two A/C ducts and also do you still have the horns? Thanks.
Yes I have them but , #13 has a crack where it fits over #12

rsmarr1982 04-03-2017 06:48 PM
Re: 72 c30 longhorn parting
 
Quote:
Originally Posted by spitfire980 (Post 7904960)
No I don't have those

rsmarr1982 04-03-2017 06:51 PM
Re: 72 c30 longhorn parting
 
2 Attachment(s)
Quote:
Originally Posted by Dirt's72 (Post 7899658)
Thanks. Still interested in the cluster as well. Pic of crack? Fuel line from pump to carb?
Cluster was missing a whole corner I took it a part to fix my own cluster. Here are pics of the fuel line . Are you still interested in the shroud?

rsmarr1982 04-03-2017 07:29 PM
Re: 72 c30 longhorn parting
 
5 Attachment(s)
Parts still avalible :
Big block Alternator brackets $100 shipped sold
Big block Power steering brackets and pump $85 shipped sold
Big block Crank pulley and water pump pulley $65 shipped
Big block fan shroud $125 shipped.sold
Solid high hump trans tunnel for automatic $100 shipped
Big block 72 quadrajet #7042206 $150 shipped
Big block 1972 402 , has int/ext. Manifolds and flywheel $750.
Big block 72 engine perches and clam shells with bolts $150 shipped

rsmarr1982 04-03-2017 07:33 PM
Re: 72 c30 longhorn parting
 
2 Attachment(s)
Pics2

Dirt's72 04-03-2017 08:13 PM
Re: 72 c30 longhorn parting
 
Quote:
Originally Posted by rsmarr1982 (Post 7905562)
Cluster was missing a whole corner I took it a part to fix my own cluster. Here are pics of the fuel line . Are you still interested in the shroud?
Yes fuel line and shroud shipped to 87114?

rsmarr1982 04-03-2017 08:28 PM
Re: 72 c30 longhorn parting
 
Quote:
Originally Posted by Dirt's72 (Post 7905641)
Yes fuel line and shroud shipped to 87114?
$115 shipped

Dirt's72 04-03-2017 08:51 PM
Re: 72 c30 longhorn parting
 
Sounds good.

bulky 04-03-2017 09:21 PM
Re: 72 c30 longhorn parting
 
Interested in the alternator brackets, PM sent.

72k5zl1 04-03-2017 11:00 PM
Re: 72 c30 longhorn parting
 
interested in hi hump and all of the clutch linkage between pedal and fork. need motor pivot and frame pivot also. thanks

BlueBoy72 04-04-2017 12:27 AM
Re: 72 c30 longhorn parting
 
Interested in lower retaining clips for fan shroud .

jpgl 04-04-2017 12:50 AM
Re: 72 c30 longhorn parting
 
power steering system include the reservoir? if so i am interested.

b.sharp 04-04-2017 03:39 PM
Re: 72 c30 longhorn parting
 
pm sent about frame.

72swbcamo 04-04-2017 08:54 PM
Re: 72 c30 longhorn parting
 
I have a C-30 that the cross member just before the rear differential is rotting away. Would you be interested in removing this crossmember from the frame and selling it? If you are planning on leaving the frame intact I can understand that. I'll try to get a picture of the crossmember i am interested in.

rsmarr1982 04-04-2017 09:50 PM
Re: 72 c30 longhorn parting
 
Quote:
Originally Posted by BlueBoy72 (Post 7905888)
Interested in lower retaining clips for fan shroud .
clips are gone sorry

rsmarr1982 04-04-2017 09:51 PM
Re: 72 c30 longhorn parting
 
Quote:
Originally Posted by 72swbcamo (Post 7906611)
I have a C-30 that the cross member just before the rear differential is rotting away. Would you be interested in removing this crossmember from the frame and selling it? If you are planning on leaving the frame intact I can understand that. I'll try to get a picture of the crossmember i am interested in.
sorry frame was rusted bad in the rear, nothing left of it sorry.

rsmarr1982 04-04-2017 09:52 PM
Re: 72 c30 longhorn parting
 
Quote:
Originally Posted by b.sharp (Post 7906382)
pm sent about frame.
frame is shot and was scrapped sorry

rsmarr1982 04-04-2017 09:52 PM
Re: 72 c30 longhorn parting
 
Quote:
Originally Posted by jpgl (Post 7905906)
power steering system include the reservoir? if so i am interested.
yes it is included

rsmarr1982 04-04-2017 10:25 PM
Re: 72 c30 longhorn parting
 
radio, speaker and power wire sold to dave.

jpgl 04-04-2017 11:06 PM
Re: 72 c30 longhorn parting
 
i will take the power steering setup sent you a message.

72swbcamo 04-04-2017 11:44 PM
Re: 72 c30 longhorn parting
 
Thanks for your reply.


Quote:
Originally Posted by rsmarr1982 (Post 7906662)
sorry frame was rusted bad in the rear, nothing left of it sorry.

feller 04-05-2017 11:08 PM
Re: 72 c30 longhorn parting
 
Is the cab getting cut?


All times are GMT -4. The time now is 05:24 PM.
Page 5 of 6 1234 5 6
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com