|
Re: Beth's tribute truck.
Quote:
|
Re: Beth's tribute truck.
2 Attachment(s)
Well we got a little bit more done on the firewall today. Finished shaving it and adding the piece to make it more cimetrical. Ordered the manifold for the "Old Air" A/C.
|
Re: Beth's tribute truck.
Youare making great progress WESS :metal:
|
Re: Beth's tribute truck.
Looks good!
|
Re: Beth's tribute truck.
:metal:
|
Re: Beth's tribute truck.
4 Attachment(s)
Steadily working at it. Got started on the behind the rear marker lamp filler for the Boyde tank. I am going with the full 2" neck so the tank fills rapidly. Bit of a job and tight quarters but should fill better than the 1 3/8" Blazer fill. Just need to button it up now. WES
|
Re: Beth's tribute truck.
4 Attachment(s)
Flip for ya.
Looks Great. I seen them on FB and they where right;) Attachment 2137529 Attachment 2137530 Attachment 2137531 Attachment 2137532 |
Re: Beth's tribute truck.
Nice work on the marker light fuel filler!
|
Re: Beth's tribute truck.
I like it too! It's very clean looking.
|
Re: Beth's tribute truck.
5 Attachment(s)
We got a little further along with the behind the side marker filler. Should be mounting the door tomorrow.
|
Re: Beth's tribute truck.
More progress on the gas filler.. This is working out great.
https://m.facebook.com/story.php?sto...00002381245184 |
Re: Beth's tribute truck.
4 Attachment(s)
Getting closer to finishing the gas filler conversion.
|
Re: Beth's tribute truck.
3 Attachment(s)
Little more progress to report. The gas filler hole has been filled and stake pockets shaved.
|
Re: Beth's tribute truck.
3 Attachment(s)
Not a lot to report on the Tribute Truck today. Just cleaning up some random holes and boxing the bed cross sill that I cut to fit the Boyde gas tank.
|
Re: Beth's tribute truck.
It's looking great.
|
Re: Beth's tribute truck.
Getting there, bit by bit.
|
Re: Beth's tribute truck.
5 Attachment(s)
The cab is getting close to being bodyworked. Probably another day and it will be. Spent most of the day cutting all the holes needed for a cargo light and headliner.
|
Re: Beth's tribute truck.
2 Attachment(s)
Couple more pictures.
|
Re: Beth's tribute truck.
5 Attachment(s)
Time to fix the left rocker.. Well and everything else I found under it.
|
Re: Beth's tribute truck.
That looks like fun, I'm sure you'll get it done...it's gonna be a a nice truck.
|
Re: Beth's tribute truck.
Thank you. Ya, been here before. I am glad I decided to the rockers as a matter of maintenance. The rockers weren't bad, but with the paint going on, I didn't want the rust to appear after it was done.
|
Re: Beth's tribute truck.
The rockers on my '68 Stepside are shot. Can't blame a PO. I did it. As a 20-something I splashed in the surf at San Diego and Daytona -- both coasts. I was young and indestructable and so was my truck. By 2021 I'd be flying a Hovercar anyway.
|
Re: Beth's tribute truck.
Great job Wes!!!
Keep up the good work. Smitty |
Re: Beth's tribute truck.
5 Attachment(s)
A little more progress done on Beth's Tribute Truck. The left side of the cab is done now.
|
Re: Beth's tribute truck.
4 Attachment(s)
More pics.
|
| All times are GMT -4. The time now is 04:02 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com