Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
I've got a few pieces I saved off my '62 that are free to anyone who can use them.
Rear step bumper. I had to cut off one of the brackets but its a straight cut and should be pretty easy to reuse. It's really heavy. [IMG]http://i269.photobucket.com/albums/j...710_195053.jpg[/IMG] [IMG]http://i269.photobucket.com/albums/j...710_195109.jpg[/IMG] I also have both lower control arms with the torsion bars still in them, H032 center section and both axle shafts still available if anyone is interested. I can post pics of the other stuff if needed. I'd really prefer not to ship these, but if ya really need it I'll see what I can do. |
Re: The 60-66 "PAYING IT FORWARD" thread!
1 Attachment(s)
Factory gauges from I believe 64 with warning lights
was in a load of parts I got looks to be in decent shape but noticed the speedo needle is MIA..if anybody needs one for parts or can fix the needle you are welcome to it just toss in a little for shipping.. I am in NC |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
1 Attachment(s)
Inline 6 250 casting number 366855. Still in truck and you can hear it run.. Has some issues and runs on the hot side. I am switching over to an LS motor, and if anyone can use it, come and get it. I am in Milford MI. You can also have the three speed manual transmission. If no one wants it, I am just going to scrap it.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Oh Man! I wish you were closer!
|
Re: The 60-66 "PAYING IT FORWARD" thread!
I have a Classic Performance Trac Bar 6364DATB, which is supposedly made for 63-64 trucks. Brand new, with attempted installation marks on it.
I bought it from Summit, and I can't get it to fit for the life of me, I am sure it user error but I could use some good karma and I'm just going to put new bushings in my stock bar. Here is the exact one: http://www.summitracing.com/parts/cl...datb/overview/ I think it's missing a lock nut on it from trying to get it on, but I think it can be used as is or replaced (you can still lock the bar from spinning with one nut) Please don't ask for this to resell, if you've got a lowered 63-64 and can pay shipping, I will send it to you. -Zac |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
62 bigwindow, did anyone get the gauges from you? I am in Charleston and could use them if you still have them.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "Pay It Forward" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Yep, replied to your PM.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Could anyone use a stock fuse block off a '60? I've got a good bit of the wiring still too. Just cover the shipping and I'll send it out. Corrosion free too.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Yes, I just don't know how to arrange shipping for these big o things. I'll get some pics tomorrow.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Hello everyone I was cleaning out the garage and found a Chevy manual 67-88 I believe these go for 20$ I think. Don't remember if its a Haynes or a Chilton. But if anyone wants to pay for an envelope its yours not tears or missing pages . may have a few smudges of grease or grime. Do not have a pic yet but will have one up in an hour or so.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
5 Attachment(s)
Hopefully someone on the mid atlantic region can use some of this stuff. I want to help out some folks but do not have time to deal with shipping as most of this stuff just not easy to ship - so if you can come get it - it's yours.
So we've got in this group: clutch throw arm spring that goes in the fuel hose between the cab and tank bed braces - 3 of them - all sand blasted and powder coated cross member with emergency brake setup bumper guards - the carriage nuts on the back need to be replaced - and looks like one was welded in place? otherwise great shape and believed to be OEM Door handle and latch |
Re: The 60-66 "PAYING IT FORWARD" thread!
5 Attachment(s)
motor mounts
chrome bed strips for short bed stepside hood hinges and springs speedo labels and gas pedal (both new in bags) emergency brake cables - both in very good shape. |
Re: The 60-66 "PAYING IT FORWARD" thread!
1 Attachment(s)
some brace in the bed - I think it was in the area of the spare tire of my stepside.
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
Greg. Looks like I was a few seconds too late - literally. Greg. |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
Sean |
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Quote:
|
Re: The 60-66 "PAYING IT FORWARD" thread!
Hi,
If you still have them, and can toss the door handle and gas pedal in a box I'll pay shipping utilize them. thanks, |
Re: The 60-66 "PAYING IT FORWARD" thread!
Wayno - Are the motor mounts/stands still available? Are they for a 6cyl? If they fit in a USPS Medium Flat rate box, I would be interested in getting them for the cost of shipping. My even consider the hood hinges if both can fit into a Large Flat Rate box.
Karl |
Re: The 60-66 "PAYING IT FORWARD" thread!
Is this steering column available?
|
All times are GMT -4. The time now is 06:08 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com