Re: 18" and 20" steel wheels?
Quote:
|
Re: 18" and 20" steel wheels?
yup, pretty much ended up getting them off ebay , about 80/ea shipped iirc.
and they are also 20"x8" and i think +23mm or 26mm offset dont remember off the top of my head |
Re: 18" and 20" steel wheels?
whoa, kick ass
|
Re: 18" and 20" steel wheels?
Still not a complete truck but frame is built to lay body on mod steel 20x9 with 275/45r20.
http://i163.photobucket.com/albums/t...808CAFF0A2.jpg Posted via Mobile Device |
Re: 18" and 20" steel wheels?
Sweet!:metal::metal:
Posted via Mobile Device |
Re: 18" and 20" steel wheels?
Quote:
Rob Posted via Mobile Device |
Re: 18" and 20" steel wheels?
Looks bad a$$ NSk! How did you get in contact with them? I have been trying to call them but it just keeps ringing, no answer. Do you have an email address by chance?
Posted via Mobile Device |
Re: 18" and 20" steel wheels?
Thanks bro. Adam@modsteel.com is the best way
Posted via Mobile Device |
Re: 18" and 20" steel wheels?
Thank you
Posted via Mobile Device |
Re: 18" and 20" steel wheels?
I could be wrong but i think it's actually adam@mobsteel.com
Posted via Mobile Device |
Re: 18" and 20" steel wheels?
I didn't even realize that he typed mod* I just assumed it was mob.
I just sent an email to adam@moBsteel.com so hopefully that's correct. Posted via Mobile Device |
Re: 18" and 20" steel wheels?
Those look nice, what cap are you planning on running?
|
Re: 18" and 20" steel wheels?
Yes it's Mobsteel.com my spelling sucks. But talk to Adam he's pretty cool. I'm running there new retro baby moons.
http://i163.photobucket.com/albums/t...FF3AA9428F.jpg Posted via Mobile Device |
Re: 18" and 20" steel wheels?
Quote:
What is the bolt pattern for these? I was thinking of running the Dodge rims but the bolt pattern is different and didn't want to run spaceres. |
Re: 18" and 20" steel wheels?
6x5.5
|
Re: 18" and 20" steel wheels?
Another awesome thread.....
|
Re: 18" and 20" steel wheels?
1 Attachment(s)
Found this set of Mobsteel 20's today on Craigslist,...
http://stlouis.craigslist.org/pts/3623328877.html |
Re: 18" and 20" steel wheels?
Looks like somebody's trying to make a little bit of money ;)
|
Re: 18" and 20" steel wheels?
Quote:
Posted via Mobile Device |
Re: 18" and 20" steel wheels?
Adam told me $880 for a set of 20's and $980 if I wanted them powdercoated white, which I do. Shipping isn't $320!! Hey, that's capitalism and if he gets it, good for him.
|
Re: 18" and 20" steel wheels?
Quote:
Just can't get into these wheels! But, that's another one of those things you like...or, you don't!! :lol::lol::lol: |
Re: 18" and 20" steel wheels?
I really think it's the caps. I think if you were to do what Delmo did with the old dog dish caps I think it would look good. I'd like to see someone do that or at least photoshop it.
|
Re: 18" and 20" steel wheels?
Anybody know if Adam has got the 6 luggers done yet?
|
Re: 18" and 20" steel wheels?
2 Attachment(s)
Here is my ride a 67 stepper bagged and bodydropped on 22x9 smoothies with 265/35/22 all around. I am wanting to go with some 20 in mobsteels in off white with caps and skinny whitewalls. I want a tire and wheel combo thats a little smaller so I can cruise a little lower without having to air up all the way maxxed out so I can turn without scrubbing any suggestions on tires and backspacing would be appreciated. 22x9 with 5.5 bs and +12 mm offset is what I have now if that helps was thinking of running 265/35/20 and dropping the overall diameter 2 inches from 29.3 to 27.3. Let me know if I am going in the right direction and your opinions are appreciated.
Brandon |
Re: 18" and 20" steel wheels?
|
Re: 18" and 20" steel wheels?
I have been talking with Pam over at mobsteel via email and it turns out that they now stamp their wheels in 6x5.5! I'm trying to get some information on a potential 22. Fingers crossed...
Posted via Mobile Device |
Re: 18" and 20" steel wheels?
Quote:
Posted via Mobile Device |
Re: 18" and 20" steel wheels?
1 Attachment(s)
Really? That's not that bad, for me anyway. I can wait 4-5 months considering I have my 64 in pieces.
Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device |
Re: 18" and 20" steel wheels?
2 Attachment(s)
Is it just me or does the diameter of the back of the wheel look smaller than the front? Is this just an optical illusion?
|
Re: 18" and 20" steel wheels?
Quote:
Mine has been in the garage about 4 months longer than I expected and its still gonna be in there for a while! LOL |
Re: 18" and 20" steel wheels?
Quote:
Posted via Mobile Device |
Re: 18" and 20" steel wheels?
Will factory dog dish caps work with these wheels or would I have to install some clips?
Posted via Mobile Device |
Re: 18" and 20" steel wheels?
I could be wrong, but I'm thinkin' it needs clips...
Quote:
|
Re: 18" and 20" steel wheels?
You'll need to drill and tap for clips. That's what I plan to do. Just trying to decide on which caps to use.
Posted via Mobile Device |
Re: 18" and 20" steel wheels?
Ok sounds good. I figured I would need the clips but just wanted to make sure. I plan on installing the original factory caps.
Posted via Mobile Device |
Re: 18" and 20" steel wheels?
1 Attachment(s)
Drilled and tapped the smoothies for some old 6 lug center caps yesterday I think some color on the faces of the wheels with polished lips will finish off the look. All the chrome in my opinion is too much bling for me. I am thinking maybe off white.
Brandon |
Re: 18" and 20" steel wheels?
Your truck looks awesome!
|
Re: 18" and 20" steel wheels?
1 Attachment(s)
Here is a photoshop with a beige off white color let me know what u guys think. IMO i think it completes the look and goes with the truck better than the bling. I may even go a little darker with the color to kinda match the lettering on the doors.
Brandon |
Re: 18" and 20" steel wheels?
Quote:
|
Re: 18" and 20" steel wheels?
They are tight up front I am running tubular upper and lower arms with bags from airbagit.com no inner fender wells and no hood hinges the hood is pinned. The body has been dropped so the firewall is slanted back from pretty much the master cylinder down in the rear the bags are pretty much in place of the coil springs and the floor raised and the bed dropped the wheels are 22x9 with 5.5in bs and they come very close to the fender. I cut out the part where the spare goes and made a sheet metal part thats like a fender for the tire to go up into and covered it with a jack daniels sign.
Brandon |
All times are GMT -4. The time now is 05:32 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com