Re: 1963 GMC C30 panel truck
1 Attachment(s)
Here's the fender so far
|
Re: 1963 GMC C30 panel truck
Nice work, good to see you making progress
|
Re: 1963 GMC C30 panel truck
1 Attachment(s)
Quote:
Down island until the 4th. Looking to get some more done on the floor pan, rockers and floor support. Started on the floor here is where I'm at. All the bulbs in the shop were out when I got down, will have to pick up some tubes tomorrow. |
Re: 1963 GMC C30 panel truck
Anthony...Great progress on the truck, did you determine if it is a 62, wider frame in the back? I found that a 93 caprice wagon poly fuel tank fits close to the frame rails of my 62, made some new cross braces and hung with 93 OEM straps. May not be what you need for diesel...Ed
|
Re: 1963 GMC C30 panel truck
1 Attachment(s)
Quote:
Passengers side floor, rocker and floor support are checked off the list :metal: |
Re: 1963 GMC C30 panel truck
1 Attachment(s)
Got the motor pulled last night
|
Re: 1963 GMC C30 panel truck
1 Attachment(s)
Moving on to the drivers side. It is in much better shape, have to repair the hinge adjuster plate and the bracket that holds it in place. Soo many rats nests in the A pillar and rocker!!!
|
Re: 1963 GMC C30 panel truck
It's surprising how much driver and passenger sides can differ, mine was like that as well. The passenger was twice as worse as the drivers. When you are done all the rust repair you'll be glad you got it over with. Keep up the good work
|
Re: 1963 GMC C30 panel truck
1 Attachment(s)
Quote:
More progress on the drivers side rocker. This side had more material to work with and is turning out better then the passengers side. |
Re: 1963 GMC C30 panel truck
1 Attachment(s)
Got the hunger adjuster plate fabricated as well
|
Re: 1963 GMC C30 panel truck
Nice work on the inner rocker:metal:. Well the burb might actually still be alive. He dropped it off at a yard (don't know what yard) and it might not be crushed for a while. I messaged him to ask if it's still around, if it is I'll be sure to let you know.
|
Re: 1963 GMC C30 panel truck
Quote:
|
Re: 1963 GMC C30 panel truck
Quote:
|
Re: 1963 GMC C30 panel truck
1 Attachment(s)
Quote:
Went hard today and I got the floor in and fabed up the inner portion of the A pillar. More to come |
Re: 1963 GMC C30 panel truck
Nice job! I don't know where you find the time to do all this in one day:chevy:
|
Re: 1963 GMC C30 panel truck
1 Attachment(s)
Quote:
Got more panels fabed up. Here's the Inner A pillar |
Re: 1963 GMC C30 panel truck
1 Attachment(s)
And the inner B pillar panel
|
Re: 1963 GMC C30 panel truck
1 Attachment(s)
I got both panels welded in and the floor support bolted in. The outer rocker will go on tomorrow along with some paint. More to come
|
Re: 1963 GMC C30 panel truck
1 Attachment(s)
Oooooo yeah!!! :metal: Drivers side floor, rocker and floor support checked off the list. Very pumped, all the cab metal repairs are done getting very close to drive line work. I am looking to take the dodge off the road the next stretch of time off I get. I can't wait to get the Cummins between the frame rails :burnout:
Time for a cold one! |
Re: 1963 GMC C30 panel truck
Wow nice job man! You are in the home stretch now:metal: keep up the good work
|
Re: 1963 GMC C30 panel truck
Quote:
|
Re: 1963 GMC C30 panel truck
1 Attachment(s)
Here is the passengers side barn door, thanks Perro13!
I got the rusty bottom patched and the whole door wire wheeled and painted. Bondo free!!!! I had to rebuild the latch I picked up off that 62 Suburban in Princton as well as modify the new lock/ push rod to match the length of the original. The latch push rod is shorter and I could not find and repos for the panel/ Suburbans out there. All works like a dream now. I Will be dropping the door off at a glass place this time.... Cracked the pane for the drivers side. Need some fresh rubber anyways. Hahaha. Luckily I got a spare pane from the new door. I have the highs all ready to go and some new hinge seals to go with them. I will be working down island next week so I will have some time in the evenings to get the door mounted, mess around with the drivers side door spacing and the door seals. Thanks for tuning in! |
Re: 1963 GMC C30 panel truck
1 Attachment(s)
This door is in much better shape then my old one!
Side view. The rebuilt door latch, turned out awesome. |
Re: 1963 GMC C30 panel truck
1 Attachment(s)
Working down island this week so I got a chance to bring the barn door down with me. I got some "smoke" tinted glass cut for both doors and the seals were salvageable! With a little adjustment I got them working pretty good! Still need to fab up some rubber door stops for the passengers side.
I also have a set of the OEM rear seals coming. Just about got the rear end all wrapped up. |
Re: 1963 GMC C30 panel truck
1 Attachment(s)
Very pumped !
|
Re: 1963 GMC C30 panel truck
1 Attachment(s)
Finally able to put my cowgirl where I want her hahaha
|
Re: 1963 GMC C30 panel truck
It's looking really sharp:chevy:
|
Re: 1963 GMC C30 panel truck
:agree:
|
Re: 1963 GMC C30 panel truck
Quote:
Quote:
|
Re: 1963 GMC C30 panel truck
Quote:
|
Re: 1963 GMC C30 panel truck
1 Attachment(s)
Quote:
Finally got the passengers side fender all smoothed out and got some POR on her, jeeze stuff rusts fast here hahaha. Got some time this weekend so hopefully I can get the fender all finished up. |
Re: 1963 GMC C30 panel truck
Any recent progress on the panel Anthony?
|
Re: 1963 GMC C30 panel truck
1 Attachment(s)
Quote:
Thanks for checking in hahaha. I got the passengers side fender all back together, not super happy with how it turned out, but it's on... Will have to address it later. Went to the junk yard in Port Hardy and picked up a bunch of window seals and started to fit them around the door glass. I got the passengers side seals all done up, I think I looks good and should keep the water and wind out a bit better then the felts. |
Re: 1963 GMC C30 panel truck
1 Attachment(s)
Another of the fender
|
Re: 1963 GMC C30 panel truck
1 Attachment(s)
With the new seals
|
Re: 1963 GMC C30 panel truck
1 Attachment(s)
The inside
|
Re: 1963 GMC C30 panel truck
1 Attachment(s)
I also got the main door seal put in also. Super nice, I really like the precision seal product. Went in nice
|
Re: 1963 GMC C30 panel truck
Good to hear the door rubber worked out well for you. I hear lots of complaints on the repop seals
|
Re: 1963 GMC C30 panel truck
Do you have any more details on the window seals you used. Close up pictures? What they are out of?
|
Re: 1963 GMC C30 panel truck
Quote:
Quote:
|
All times are GMT -4. The time now is 10:48 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com