Re: 1969 Short Wide
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Thanks guys! |
Re: 1969 Short Wide
You just continue make awesome stuff for this project. I wish I had your creativity and skills to produce these pieces. Keep up the good work Mike.
|
Re: 1969 Short Wide
Quote:
|
Re: 1969 Short Wide
We putting it together tonight?
|
Re: 1969 Short Wide
Nice job Mike, the tinted raptor on the bed floor looks awesome.
|
Re: 1969 Short Wide
Man, that Raptor looks nice! You're makin' me want to git started! It all looks really good.
|
Re: 1969 Short Wide
Quote:
I had a small dust nib that I was removing with 1500 grit apparently the clear was thinner than I expected cause I got through and didn't notice till it was way too late. story of my life http://i14.photobucket.com/albums/a3...psb9782071.jpg http://i14.photobucket.com/albums/a3...ps687cf0f9.jpg |
Re: 1969 Short Wide
Quote:
Quote:
I'm always glad to motivate others, like they do me on here. :) |
Re: 1969 Short Wide
Man that looks great! Soo cool how you can tint the stuff. Really like what you did on the lower bed sides too. Sharp!
|
Re: 1969 Short Wide
Quote:
Really diggin the raptor finish. I dont know anything about the raptor product. Ive seen it posted here and there, but since Im not to that point I havent researched it. How did you get the tint so close to the actual color of your paint? |
Re: 1969 Short Wide
Looking awesome! I need to make sure I coat mine with some raptor also. Sometimes I get ahead of myself and skip steps.
|
Re: 1969 Short Wide
Quote:
Quote:
Quote:
|
Re: 1969 Short Wide
Really smart idea coating the inside with Raptor. That and a garage will keep this puppy around for years to come.
Looking great, Mike. |
Re: 1969 Short Wide
Looks great mike.. Top notch work!
|
Re: 1969 Short Wide
Mike, great work! That's what I want to do to my Longhorn's bed floor too. I probably won't go to the extent you did with the dent removal on the floor because I still want to try to use it like a truck. I know If I make it super nice, I'll never put anything in the bed. :lol:
|
Re: 1969 Short Wide
Why cant you be my best buddy and neighbor.... and help me do that with my truck! :) That is sweet!
|
Re: 1969 Short Wide
I just found your thread. So far I've only gone back a few pages, but I've got a lot of reading to do... I'll be caught up in a few days :lol:
I like the tinted raptor liner. How hard is it to spray? What sort of air pressure are you using/need? What about the gun, did you use a special gun or just a large tip hvlp? I like what I'm seeing on the last few pages. Keep up the good work. |
Re: 1969 Short Wide
Quote:
Quote:
Quote:
Quote:
Quote:
On the Raptor liner, I bought my kits on eBay for around $120 shipped, You can buy it at TCP or Amazon or even your local Oreilly's can order it. Kit comes with the Shutz type spray gun and 4 liters of urethane. I have been spraying at around 60psi. I also reduce mine a little which seems to make lay a little less lumpy. LINK |
Re: 1969 Short Wide
Looking awesome! Are you going to weld the bedside to the floor at the tailgate end like the factory did?
|
Re: 1969 Short Wide
That Raptor looks great! :metal: :metal: Very uniform job Mike! For the Raptor tint, I've read some actually mix it up a little darker, since it shoots a little lighter. I still have some I never used after purchasing a while back, now, after seeing your work, I think I'm going to copy you and your bedside coating. Nice. Are you shooting the underside of the tubs with Raptor?
|
Re: 1969 Short Wide
Quote:
Yes, I will be sanding the paint off in the areas that are to be welded. Just like the factory did. I taped that area off to avoid the raptor there too. Once I get the bed assembled squared up and tailgate fitted, I will weld her up and repaint that area. Hope it goes as planned. Quote:
edit: BTW, In hindsight it would have been far easier to replace the front panel, cross braces and install a nice wood floor like you did. I don't know how much money I spent salvaging these rough metal panels? but I would have been done with the bed long time ago. These are the things we learn as we go. I'm pretty dang tight with the budget but as you can tell from the length of the build, I have plenty of time. Would I do it over? Probably |
Re: 1969 Short Wide
I got the sand through fixed. Sanded the whole tub with 1000 then had to re-apply base coat in the bad spot. I let it set up over night then wet sanded that area to level it out. Next I re-shot two more coats of clear.
It looks orangy in the strange light but we all know it's RED http://i14.photobucket.com/albums/a3...ps7938db3b.jpg http://i14.photobucket.com/albums/a3...ps608f2c2f.jpg http://i14.photobucket.com/albums/a3...ps2caae69e.jpg http://i14.photobucket.com/albums/a3...psde718bb3.jpg http://i14.photobucket.com/albums/a3...ps3eb2861b.jpg |
Re: 1969 Short Wide
Very cool :metal:
|
Re: 1969 Short Wide
OK, fine....I thought I was doing good with getting the bed painted....but dang bro, this is bed is incredible!!! Great job Mike, keep it up man.
|
All times are GMT -4. The time now is 06:22 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com