The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Alternate Tinkerings (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=140)
-   -   Columbus..the 1957 IH 4x4.. (https://67-72chevytrucks.com/vboard/showthread.php?t=750501)

Ol Blue K20 10-01-2020 08:51 AM

Re: Columbus..the 1957 IH 4x4..
 
Quote:

Originally Posted by mongocanfly (Post 8816259)
After several (as in many) delays, I finally got the doors painted..I'm gonna go ahead and say probably for the 1st time based on my past painting adventures..

They look great the first time. You're doing great job.....every time...:lol::lol::lol:

mongocanfly 10-01-2020 10:19 AM

Re: Columbus..the 1957 IH 4x4..
 
Thanks Dale..!

67C10Step 10-02-2020 03:46 PM

Re: Columbus..the 1957 IH 4x4..
 
Come on up to my house. I will put you up in my spare room and any "reject" work you perform on my truck will be 10x anything I will probably achieve.

Continues to look good.

mongocanfly 10-03-2020 12:17 PM

Re: Columbus..the 1957 IH 4x4..
 
Ha..67c...I've had so many rejects I could have built 2 or 3 more trucks from them...

burnin oil 10-03-2020 07:11 PM

Re: Columbus..the 1957 IH 4x4..
 
And most would think those 2 or 3 reject trucks were mint!

mongocanfly 10-05-2020 05:06 PM

Re: Columbus..the 1957 IH 4x4..
 
Dont bet on it b.o...haha

mongocanfly 10-05-2020 05:11 PM

Re: Columbus..the 1957 IH 4x4..
 
2 Attachment(s)
I knew something had to go wrong.....it did....
I started wet sanding the doors...about half way thru painting the other night I noticed the paint nibs show up..well when I started wet sanding, the nibs rolled out, leaving me some primer spots to look at..
So here we go again..I only sanded one door, and it was the worst of the 2 as far as nibs go...but I'll fully sand them to see what I got...then repaint...sighhhhh..

HAULIN' IT 10-05-2020 09:08 PM

Re: Columbus..the 1957 IH 4x4..
 
See my reply to your post in the Body/Paint section. Lorne

Ol Blue K20 10-06-2020 05:49 AM

Re: Columbus..the 1957 IH 4x4..
 
Quote:

Originally Posted by mongocanfly (Post 8818361)
I knew something had to go wrong.....it did....
I started wet sanding the doors...about half way thru painting the other night I noticed the paint nibs show up..well when I started wet sanding, the nibs rolled out, leaving me some primer spots to look at..
So here we go again..I only sanded one door, and it was the worst of the 2 as far as nibs go...but I'll fully sand them to see what I got...then repaint...sighhhhh..

Ya jinxed yourself. :lol::lol::lol:

regan wilson 10-06-2020 07:50 AM

Re: Columbus..the 1957 IH 4x4..
 
Well Mongo! You know you have to do everything twice . Sorry for the difficulties.

mongocanfly 10-06-2020 08:34 AM

Re: Columbus..the 1957 IH 4x4..
 
yeah,...my "lucky" streak continues..
it may not be as bad as I thought at 1st... Lorne pointed out it may be sanding residue in some little divots...turns out it was in some of them..theres still one I cant get out

67ChevyRedneck 10-06-2020 11:33 AM

Re: Columbus..the 1957 IH 4x4..
 
Little dab of paint to fill the hole, wet sand, and buff?

mongocanfly 10-06-2020 02:52 PM

Re: Columbus..the 1957 IH 4x4..
 
that's the plan Jesse ,,, dab of paint-wet sand- buff...and see what happens

mongocanfly 10-07-2020 11:44 PM

Re: Columbus..the 1957 IH 4x4..
 
1 Attachment(s)
I got my new moisture trap setup finished...heres a pic of the old setup.(after I took it apart)..and the new setup..I used all new pipe and fittings as aell...when I looked inside the old pipes, they were oxidized inside..
I also mixed up some paint to try to fill in the divots..my paint mixes 8:4:1...so i took a toothpick and dipped in the red ,and put 8 drops on the board, then another toothpick in the hardner and added 1 drop of it...then i mixed it up....a new toothpick worked pretty good for dabbing paint..now my door looks like it has the measals..I tried to get a pic of it but it doesnt show up to good..
I'll let it dry good and then see if itll wet sand and blend in..if not , there will be a repaint acoming...

mongocanfly 10-08-2020 10:42 PM

Re: Columbus..the 1957 IH 4x4..
 
Well....a little dabll do ya...just like the old brylcream commercial....
I'm gonna call this a success...I did the paint dabs in a bunch of spots on the worst of the 2 doors..let it dry a couple days..got out there tonite and started on the spots with 600g wrapped around a paint stick..
I sanded in a X pattern across them ...I know where most were and for the life of me , I cant see them now ..i had the LEDs shining across the door so i could tell when they were gone..after I got them all I went over the whole door panel with 600g to give it a consistent finish..I'll go back with 1500 and 2000g then buff ..I think its gonna be fine...
So I've now learned a new trick on how to fix blemishes...

And a big thanks to all for the advice and tips...

I tried getting some before and after pics but they just wouldnt show them well..
I'll add some pics after I buff ...hopefully get that done this weekend ..
On my way back out to do touchups on the other door..

72 tigger 10-11-2020 07:21 PM

Re: Columbus..the 1957 IH 4x4..
 
Good deal- glad you could fix it

mongocanfly 10-11-2020 08:08 PM

Re: Columbus..the 1957 IH 4x4..
 
thanks Kirk..!!

mongocanfly 10-11-2020 08:08 PM

Re: Columbus..the 1957 IH 4x4..
 
4 Attachment(s)
been working nights for the last week, so Ive only had a few minutes a day to work on doors...
been filling in the fish eyeballs that happened when I painted the doors...
I sanded them smooth with 600g, then 1500g, then 2000g...today I had a few minutes to buff 1 of the doors...
im satisfied ….cant even tell that there were about 40-50 spots of paint fixes on the door..
the other door wasn't as bad so it should turn out ok as well..i hope..
it was overcast when I took the pic so it doesn't show reflection as well

flashed 10-11-2020 09:08 PM

Re: Columbus..the 1957 IH 4x4..
 
It looks very good from here .

mongocanfly 10-11-2020 09:35 PM

Re: Columbus..the 1957 IH 4x4..
 
thanks flashed..!!

twinshadows 10-11-2020 10:20 PM

Re: Columbus..the 1957 IH 4x4..
 
Looking really good . . . . with th' "touch-up . . tooth pick" .

takes a steady hand . . . .

jim

ps - you should have my '53 , with that "side-opening" type hood ......
you can't help from 'dinging th' paint' , each time you have too
open th' hood . (and, after a few months of being careful . . . . .
just do-it anyway) .

8man 10-12-2020 09:02 AM

Re: Columbus..the 1957 IH 4x4..
 
Those turned out very nice!

Ol Blue K20 10-12-2020 09:27 AM

Re: Columbus..the 1957 IH 4x4..
 
Lookin' good. :metal:

rgunlock 10-12-2020 10:03 AM

Re: Columbus..the 1957 IH 4x4..
 
Its great when a plan works out like that.

mongocanfly 10-12-2020 09:42 PM

Re: Columbus..the 1957 IH 4x4..
 
thanks guys....!!!
yeah Jim...those old side opens were ruff on paint..


All times are GMT -4. The time now is 07:13 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com