The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 6 of 6

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Squarebody Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=139)

- - Schni's Blue 1983 K10 (https://67-72chevytrucks.com/vboard/showthread.php?t=667389)

JacobSchni

03-29-2018 10:34 PM

Re: Schni's Blue 1983 K10

1 Attachment(s)

Attachment 1769274

JacobSchni

03-29-2018 10:37 PM

Re: Schni's Blue 1983 K10

Used a homemade jig to cut my exhaust bends. 3.5" to some borla mufflers. bolted the jig to the chop saw and it gets perfectly square cuts. look like this. Used a wood rule and framing square to get angles and transfer them to the pipe off the blade.

JacobSchni

03-29-2018 10:38 PM

Re: Schni's Blue 1983 K10

1 Attachment(s)

Attachment 1769276

JacobSchni

03-29-2018 10:40 PM

Re: Schni's Blue 1983 K10

https://www.facebook.com/jake.schnei...815365/?type=3

All times are GMT -4. The time now is 12:41 AM.

Page 6 of 6

Show 40 post(s) from this thread on one page