|
Re: offical lowered thread of standard cab pu, lets see them!
3 Attachment(s)
For the folks that have "C" notched the rear frame is there a kit you used or do you have any pic of the in progress and the finished results
How much clearance do you have between the axle and frame with springs and no bags? I am tired of the axle bumping on the frame !! |
Re: offical lowered thread of standard cab pu, lets see them!
The truck my grandson bought before Christmas is very low...
has 275/45R-20's and the spring hanger bracket will actually go up into the C section The cross bar on the box has been cut to give rear end room :) He's 19 so he thinks its cool I am 65 and know better I am going to change the drop from 6/8 to 6/7 by moving rear spring hanger up a notch....... |
Re: offical lowered thread of standard cab pu, lets see them!
Quote:
|
Re: offical lowered thread of standard cab pu, lets see them!
|
Re: offical lowered thread of standard cab pu, lets see them!
|
Re: offical lowered thread of standard cab pu, lets see them!
Wow Guys
Those trucks are gorgeous and I now can see how those 6 spoke chrome will look on my 99 Z71 |
Re: offical lowered thread of standard cab pu, lets see them!
4/6 drop.. finished this morning.. http://i868.photobucket.com/albums/a...329_124913.jpg
before.... http://i868.photobucket.com/albums/a...3/IMAG0365.jpg |
Re: offical lowered thread of standard cab pu, lets see them!
Quote:
|
Re: offical lowered thread of standard cab pu, lets see them!
Quote:
|
Re: offical lowered thread of standard cab pu, lets see them!
Quote:
The simple things you did treman really brought that truck out! |
Re: offical lowered thread of standard cab pu, lets see them!
Quote:
LOL.:lol: No. I'm not going that far. I do have the toolbox up for sale and bed caps. Once off that will make it look better. Thanks |
Re: offical lowered thread of standard cab pu, lets see them!
|
Re: offical lowered thread of standard cab pu, lets see them!
whats up fellas, its not too late for me to get in on this is it?
Original owner of my 07 Classic, but just lowered it last year 4/7 drop on 22" springs/spindles flip kit/shackles camber bushings weld in deep C http://i14.photobucket.com/albums/a3...y/IMG_3311.jpg http://i14.photobucket.com/albums/a3...y/IMG_4201.jpghttp://i14.photobucket.com/albums/a3...y/IMG_4205.jpg |
Re: offical lowered thread of standard cab pu, lets see them!
Very Nice!
|
Re: offical lowered thread of standard cab pu, lets see them!
1 Attachment(s)
|
Re: offical lowered thread of standard cab pu, lets see them!
Quote:
|
Re: offical lowered thread of standard cab pu, lets see them!
Quote:
[IMG]http://i2.photobucket.com/albums/y50...psbchltohx.jpg[/IMG] |
Re: offical lowered thread of standard cab pu, lets see them!
1 Attachment(s)
|
Re: offical lowered thread of standard cab pu, lets see them!
1 Attachment(s)
My 99, drop spindles, hangers and shackles. I'd like to drop it another inch or so all the way around.
4.3, 5-speed, GMC wheels, daily driver. |
Re: offical lowered thread of standard cab pu, lets see them!
1 Attachment(s)
I picked up this 2002 RCSB from the local gas company,was a 1 driver truck its whole life,pretty plain jane with V-6 and air,I had to do some minor maintenance on it and added a Maxtrac 2/4 lowering kit, got some 2019 Chevy take off rims from the local dealer,maybe down the road I will do a full suspension swap and a LS 376/525 crate engine.
|
Re: offical lowered thread of standard cab pu, lets see them!
Nothing like a clean white shortbed. They just look so good.
|
| All times are GMT -4. The time now is 10:21 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com