Re: My 69 lonbed
don't get excited im still uploading, ha ha ha
|
Re: My 69 lonbed
5 Attachment(s)
i wont have inner fenders the will use these mounts so they went bye bye
before Attachment 528399 after Attachment 528400 the long dirty process... Attachment 528401 Attachment 528402 Attachment 528403 |
Re: My 69 lonbed
Quote:
Brian, the fender looks good! |
Re: My 69 lonbed
Quote:
Yeah, I figured he'd made good progress and It's more than I've done on my truck in almost a month now...:waah: |
Re: My 69 lonbed
Quote:
well im in my 20s and it takes a lot of time for sure! im a bit of a perfectionist so i don't rush my work. i've probably got at least 12 hours into this fender.. no joke. and definately no time lapse... ha ha i work full time and then get on the truck when i have the energy... keep at it, thats what keeps me goin. a little at a time, eventually everything will be done, and right. Thanks again |
Re: My 69 lonbed
Your right, all that time will pay off when your cruising around in your truck! The good example here too, saving an original fender instead of using a poor reproduction. :chevy:
|
Re: My 69 lonbed
Hey, I understand about the sllloooowww process! I work between 10-16 hours a day 5-7 days a week (depends on week!) and the only time I have to work on my junk is when I have the energy! Three small boys and a wife take most of my time when not working.. Brian, I can really appreciate the time and energy you have. I am in my early 30's and nothing seems to come easy to me anymore. I have SO much to learn, not the least of which is patience! Looks like good progress to me and like Mike said, at least you saved a good fender and didn't have to use a repro one! Keep it up!! :metal:
|
Re: My 69 lonbed
Quote:
|
Re: My 69 lonbed
I will trade you my crappy fitting brothers fenders for those! I think i put 12 hour into sheet metal that was suppose to "fit". Your doing good keep it up!
|
Re: My 69 lonbed
5 Attachment(s)
had energy today...
Attachment 528713 6" strap 1/8" thick Attachment 528714 Attachment 528715 wood is 2x4 70" steel is 2x2 and around 62" Attachment 528716 straps are 14" longs and are 1/8" Attachment 528717 |
Re: My 69 lonbed
5 Attachment(s)
Attachment 528718
Attachment 528719 working height Attachment 528720 goes high in case i want to ever make a monster truck C10 Attachment 528721 porterbuilt hinges showed up today... SWEET Attachment 528722 |
Re: My 69 lonbed
Looks like a solid cab lift!~you got some sweet hinges too! I saw the install done by LFD. Your shop is HUGE!
|
Re: My 69 lonbed
Nice!
|
Re: My 69 lonbed
5 Attachment(s)
|
Re: My 69 lonbed
4 Attachment(s)
|
Re: My 69 lonbed
2 Attachment(s)
FINALLY got my driver side rocker done and PRIMERED!
Attachment 530122 thought this would motivate me more... IT DID! Attachment 530123 |
Re: My 69 lonbed
Nice work. Looks good. So, when are you shaving the drip rail ;)
|
Re: My 69 lonbed
im leaning towards keeping my drip rail, too many horror stories.. ha ha. who knows, everyday i work on it i seem to customize something a little bit more... ONLY TIME WILL TELL!!!!:lol:
|
Re: My 69 lonbed
The progress isnt adding up to an 8 hour day! Wheres the rest of the progress? haha just giving you a hard time
|
Re: My 69 lonbed
Nice progress! your cab is looking good!
|
Re: My 69 lonbed
nice job with the fenders.
good progress. keep at her! |
Re: My 69 lonbed
Looks good..:metal:
|
Re: My 69 lonbed
5 Attachment(s)
ok so haven't posted pictures from sundays work so here you go!
pass side kick panel Attachment 531466 cut out bad Attachment 531467 yes i used a crapsman screwdriver. its an old one don't worry Attachment 531468 crappy spot weld Attachment 531469 however, cleaned up ok Attachment 531470 |
Re: My 69 lonbed
5 Attachment(s)
worst of rust on pass side rocker
Attachment 531471 patch in Attachment 531472 fully welded Attachment 531473 more on kick panel patch Attachment 531474 fully welded Attachment 531475 lost interest in my cab after this, moved on to something else. scroll down to find out! |
Re: My 69 lonbed
5 Attachment(s)
at the start
Attachment 531476 sand blasted! Attachment 531477 epoxy primer! Attachment 531478 now time for lightweight filler 1/16" max of filler. body shops are 1/8 i believe. i got the fender as close as i could. hate to do it but don't realy have a choice Attachment 531479 one of the best tools i've made. this thing is AWESOME! Attachment 531480 |
All times are GMT -4. The time now is 10:45 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com