The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   what seats did you put in your 67-72 Chevy truck ? (https://67-72chevytrucks.com/vboard/showthread.php?t=447657)

1gr8ate 11-18-2016 12:07 PM

Re: what seats did you put in your 67-72 Chevy truck ?
 
I have an original c10 cheyenne tach ac bucket seats by the numbers but somewhere along the lines it lost the buckets and gained a bench. Is there anywhere to buy a decent set of original buckets in red?

SeniorVerde 11-18-2016 02:20 PM

Re: what seats did you put in your 67-72 Chevy truck ?
 
https://lh6.googleusercontent.com/-Z...520console.jpg
Subaru Imprezza and a blazer console.
Dirty seats will get recovered someday.

54belair 11-18-2016 04:23 PM

Re: what seats did you put in your 67-72 Chevy truck ?
 
3 Attachment(s)
These seats are from an 05 trailblazer. They are big--but comfortable. Still have to hook up the electrics and decide whether or not I want the console there.

PapaSmurf66 01-03-2017 12:15 PM

Re: what seats did you put in your 67-72 Chevy truck ?
 
Quote:

Originally Posted by skyjgmc (Post 7767926)
It took a lot of fab on the brackets to get it to sit low enough but they turned out great and so comfy.
http://i1220.photobucket.com/albums/...pslv7jna1h.jpg

Hello, and Happy New Year guys, loving the idea's. Now with the Holidays and my daughters near Christmas b-day out of the way I can start focusing time and effort back to my truck.
skygmc, I was entertaining using a '95-'99 chevy front 60/40 bench w/ the center console. But after seeing you and a couple others using the back crew cab seat ('01-'07??)I am interested. I like the fact that these seats have the built in cup holder. I guess I am a victim of my modern cup holders. But seriously how much cutting and hacking was required to fit in your truck? looks like you made a marriage btwn the original frame and the later frame?
I Had once upon a time '88-'94 40/60 bench in my '66 C10 (which is what these would be going in). Those were great minimal fab. but i sold those when i stopped driving the truck to tear into it. Sorry long story short, do you have a few more pics of what you encountered in your install?? Any feedback is appreciated as well. Thanks

Canuckvetter 01-03-2017 01:01 PM

Re: what seats did you put in your 67-72 Chevy truck ?
 
http://67-72chevytrucks.com/vboard/a...1&d=1483462434


I bought a set of buddy buckets.

findog78 01-03-2017 05:46 PM

Re: what seats did you put in your 67-72 Chevy truck ?
 
1 Attachment(s)
Love that seat! You bought new foam and they cut it? There is still enough cushion for the butt? Is that total custom or covers you bought? How much did that run you? Or should I say how much do you want for it?

68Stepbed 01-03-2017 06:12 PM

Re: what seats did you put in your 67-72 Chevy truck ?
 
Quote:

Originally Posted by heathbirkendahl (Post 7605464)
This is my factory seat after they had to cut down the foam.

I'm considering having mine "cupped" out like that. The big issue is that I'd have to have a new cover made.

Here's how mine currently looks.

http://i221.photobucket.com/albums/d...psup6nkrg0.jpg

Elliot949 01-03-2017 06:18 PM

Re: what seats did you put in your 67-72 Chevy truck ?
 
1 Attachment(s)
Original 1967 Buddy Buckets highly modified and custom covered...

findog78 01-03-2017 07:20 PM

Re: what seats did you put in your 67-72 Chevy truck ?
 
1 Attachment(s)
First saw this in a mag. Similar but with a wider center section.

Canuckvetter 01-03-2017 09:01 PM

Re: what seats did you put in your 67-72 Chevy truck ?
 
1 Attachment(s)
Quote:

Originally Posted by Canuckvetter;7813407
[url
http://67-72chevytrucks.com/vboard/attachment.php?attachmentid=1606601&stc=1&d=1483462434[/url]


I bought a set of buddy buckets.

http://67-72chevytrucks.com/vboard/a...1&d=1483491449


But I love my ProCar bucket seats.

1BAD66 02-12-2017 12:31 AM

Re: what seats did you put in your 67-72 Chevy truck ?
 
Quote:

Originally Posted by Tmwoodall (Post 4877786)
Like these?

Have these in my 69, can't adjust them. With them all the way back(i'm 5'8") it still puts the steering column in your face & pedals to close... cushy though.

Custom/20 02-12-2017 03:39 PM

Re: what seats did you put in your 67-72 Chevy truck ?
 
2 Attachment(s)
Picked up a grey cup holder out of a 88-94 Silverado at pick n pull, cleaned it up, painted it black, and installed it.

Special thanks to "BugzC10" for the idea and sharing a link to show how he mounted it.

70short 02-12-2017 05:24 PM

Re: what seats did you put in your 67-72 Chevy truck ?
 
Canuckvetter how do those seats fit in the cab? I like the way they look. Are they tight or do you have good foward and back adjustment.

1BAD66 02-12-2017 08:10 PM

Re: what seats did you put in your 67-72 Chevy truck ?
 
Quote:

Originally Posted by Canuckvetter (Post 7813841)

Very Nice...

berch 69GMC 02-12-2017 09:51 PM

Re: what seats did you put in your 67-72 Chevy truck ?
 
1 Attachment(s)
Put these former dodge buddies in today

kehstr 02-13-2017 02:12 PM

Re: what seats did you put in your 67-72 Chevy truck ?
 
sub'd

Andy4639 02-13-2017 08:50 PM

Re: what seats did you put in your 67-72 Chevy truck ?
 
Quote:

Originally Posted by Custom/20 (Post 7856612)
Picked up a grey cup holder out of a 88-94 Silverado at pick n pull, cleaned it up, painted it black, and installed it.

Special thanks to "BugzC10" for the idea and sharing a link to show how he mounted it.

Can you post a couple of pictures with the cup holder out please.:chevy:

Mikes_70 02-17-2017 11:29 PM

2 Attachment(s)
Quote:

Originally Posted by pops45 (Post 4877830)
Got this middle seat out of a 93 Suburban. Cut the brackets down to lower the seat and drilled and re-enforced the floor. The seat bottoms pull up for storage underneath.

That's awesome I did the same thing except mine are out of an 03 second row seat Tahoe and still Functionable as far as the bottoms pulling up and the backs folding forward . I had headrests cut and bolstered the seats just a little more
Posted via Mobile Device

thetruckrman 05-20-2017 06:09 AM

Re: what seats did you put in your 67-72 Chevy truck ?
 
Nice mod!!!

howard_m18 05-20-2017 08:00 AM

Re: what seats did you put in your 67-72 Chevy truck ?
 
My builder was a F---d man so the power seats are out of a Mustang. They still have the airbag tag. Cute hugh? That is also why the truck is painted 2011 F---d Mustang Grabber Blue. Not many around to be sure.

Canuckvetter 05-20-2017 10:49 AM

Re: what seats did you put in your 67-72 Chevy truck ?
 
1 Attachment(s)
http://67-72chevytrucks.com/vboard/a...1&d=1495291690

ProCar seats with buddy console.

Captainab 07-08-2017 09:51 AM

Re: what seats did you put in your 67-72 Chevy truck ?
 
1 Attachment(s)
I used 11,12 Dodge Charger seats in 69 suburban

Captainab 07-08-2017 09:54 AM

Re: what seats did you put in your 67-72 Chevy truck ?
 
2013 suburban center console

Captainab 07-08-2017 09:55 AM

Re: what seats did you put in your 67-72 Chevy truck ?
 
1 Attachment(s)
Pre resto

Captainab 07-08-2017 09:57 AM

Re: what seats did you put in your 67-72 Chevy truck ?
 
1 Attachment(s)
2011 2nd row.


All times are GMT -4. The time now is 08:28 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com