Re: Lurker OrrieG Progress Pics
Quote:
It is a milled face one with five gauges. I got the white because it was a great deal but, I like the looks of the black ones a bit better. I could always work a trade if you find a good deal on the black ones...:lol: |
Re: Lurker OrrieG Progress Pics
Quote:
http://i11.photobucket.com/albums/a198/ahsum/gauges.jpg |
Re: Lurker OrrieG Progress Pics
Quote:
|
Re: Lurker OrrieG Progress Pics
Quote:
|
Re: Lurker OrrieG Progress Pics
OrrieG, just a piece of advice, on you steering comumn linkage, make sure that the two u-joints are in sync, ie: that the u-joints are inline. your bottom one is out by a 1/4 turn, not trying to make you mad, just trying to help, i do love the genius way of splitting the two shafts and making them wokd though, great job so far.
|
Re: Lurker OrrieG Progress Pics
Thanks. They are in the same relative position as stock unless I got the them turned 180 degrees. All of the shafts are "D" type so they can't get turned 1/4 (90 degree turn). I will check it again against the before pictures and see what is up. You question is one reason I am doing detailed posts, I like having other eyes critically looking at what I am doing. I run my office the same way, if we screw up people get hurt, everyone back checks everyone elses work.
Later: I looked at the pictures, I think it might be the camera angle, I'll check tomorrow and let you know what I find. Next day: Just finished pining the parts together, it is synced right, photo is deceptive because of angle of upper joint. It turns freely with the wheels off the ground with no binding of jerky spots. Thanks again Nuke for the concern, I do appreciate it. Patrick |
Re: Lurker OrrieG Progress Pics
Quote:
|
Re: Lurker OrrieG Progress Pics
I started around that time too, when it was little known. For about three years my wife and I made really good money buying at yard and estate sales and selling on ebay. Then around 2003-4 after ebay made it easier to post photos and you could write ads in plain text everyone started doing it. Now you can't find anything good because its already been put on ebay. I have been pulling car parts I have from the 70's and listing them and doing ok. Probably my most interesting story is buying Army shelter halves "pup-tents" at an estate sale that the guy had for painting tarps for $1 a piece. I knew they were at least pre WWII. When I put them on Ebay the bidding went crazy. I got requests for detailed photos of the snaps, stitching and some other markings on them. They had came from the U.S Army Guard unit here in Boise as surplus in the 1950's. A museum in Oregon bought them and told me that they were the only known ones left from Roosevelts Rough Riders unit that assaulted San Juan hill, the buttons and unit markings were unique to that unit and that campaign. They sold for over $200.00!
|
Re: Lurker OrrieG Progress Pics
2 Attachment(s)
OrrieG's money saving project #1: Shifter Cable.
Problem is shift rod will interfere with brake pedal. Ididit and Lokar have solutions for $145 and $120 dollars. But here is my solution using a B&M 5' replacement cable ($40 at Schucks), B&M bracket and shift arm assembly ($20 online) and my bracket (free!) and misc. hardware ($5 because I like the chrome recessed hex stuff). The trans end is per B&M instructions. Upper required drilling a hole in the original shift arm (all the extra arm will be removed when I pull the column for painting). A nylon sleeve and stainless shoulder bolt give it play). Also, the distance from the center of the steering shaft to connection point has to be the same as the length of the trans shift arm. NOTE: In the photos below the arm on the trans needs to be 180 degree, rod attacked on the top. See later posts. |
Re: Lurker OrrieG Progress Pics
3 Attachment(s)
Money saver #2: Master cylinder door.
These are $45 at most of the reproduction places, my cost was $3 (piano hinge would have been $6 but I had a piece). Tricks are rounded corners for hole (squares cut set up stress points to crack) and thumb screw with capture fitting. I will finish the hole with a piece of split vaccum hose to act as a gasket. Also a picture of my trans cover, square hole is old trans shifter location. |
Re: Lurker OrrieG Progress Pics
Very nice work.
|
Re: Lurker OrrieG Progress Pics
Thanks for the tip on the shifter cable.
|
Re: Lurker OrrieG Progress Pics
1 Attachment(s)
I switched out my avatar for an older picture. This one was taken in 1985 right after the first 4wd conversion. Wife was cute is that 80's perm. It also still had a shine to the paint. heres a bigger version
|
Re: Lurker OrrieG Progress Pics
Hats off to ya OrrieG. That's some very clean work there.
|
Re: Lurker OrrieG Progress Pics
I really like those original wheels Orrie, am I correct in assuming those are the factory '59 rims on the '70s axles? And did you have to modify the fronts to fit over the locking hubs at all? Or did they just bolt right on? And what size tire is that? I have a '57 GMC I'm working on sitting on an eighties chassis and love the look of those old-school wheels with the tall skinny tires!!
|
Re: Lurker OrrieG Progress Pics
2 Attachment(s)
Here is one 23 years later! I used it for a second spare. I wanted the knarlly stock look I remembered from the stock 4wd trucks the logger drove in the 60's. I think they are the wheels that came with the 74 running gear. The codes on the wheel is K-1-2 and CZ. The first is November 1971, 2nd shift. I couldn't find the CZ code online. I ran them because they are wider than the stock wheels. I tried 9.00 x 16 but had clearance issues in the front. The tire size on it is 7.00 x 16 Zenith Ultra Traction Lug. Lots of traction, but lots of noise and they were the old bias not radials. When they wore out I got 225/75/16 all weather tread which are about the same height but no noise or thump when cold. They have the center raised cap retainer, not clips. I was going to run dog dish caps but never got around to it, just tuned up the white paint with Rustoleum every few years. There were no fit issues since they are the same year range as the axles. I just noticed this one has tube, but that was so I could repair them back in the sticks if necessary. The ones with radials mounted fine without tubes.
Later: I have some stock 59 rims and can check them on the 74 axles if you want me to. |
Re: Lurker OrrieG Progress Pics
Don't bother! You more than answered my question and hit that '60's logger look perfectly! Not too mention getting my hands on some early '70's rims should be much easier than original style fifties rims...right now I'm rolling some el cheap-o '80's chrome rims that are more rust than chrome and look super generic (but not in a good way...)
|
Re: Lurker OrrieG Progress Pics
3 Attachment(s)
Lazy weekend. Worked on the trans cooler. In 85 I got a cooling condenser out of a small HVAC unit and had a contractor friend braze on some barb fittings. I ran high temp hoses to the trans, it worked fine. I decided to move it to the frame rail under the passenger floor well, I figure it is large enough to work there. If it heats up I left room for a fan. Took about 2 hours to straighten out all the fins, a couple more to decide how to plumb it (flare vs. ??) ended up decidiing to extend the 3/8" copper and use the barbs with short hoses at the trans. That will give me some flexibility. I made up the frame mounts, it will mount to the top or the frame when I pull the cab for final blocking.
|
Re: Lurker OrrieG Progress Pics
2 Attachment(s)
Spent Saturday making a cardboard mock up of box for behind the seat only to confirm that it would be useless, 5" wide x 18" deep. Now looking at just matching the curved line of the cab and portable storage or speaker boxes. Bolted on the radiator support and inner panels, cut out for the ps lines and steeriing column. Also started mocking up the shroud. The "new" radiator is out of a 1.5 ton truck. Its 1" thicker and 24" wide, much larger than the old 1/2 ton one.
|
Re: Lurker OrrieG Progress Pics
2 Attachment(s)
Attacked the front clip, got everything stripped, rust welded up in the driver fender and a few other small parts. Cleaned the garage so I can shoot some etch prime and chassis black. Tedious but progress.
|
Re: Lurker OrrieG Progress Pics
Looking good, wish I was at that point.
|
Re: Lurker OrrieG Progress Pics
Quote:
|
Re: Lurker OrrieG Progress Pics
Quote:
|
Re: Lurker OrrieG Progress Pics
doing it twice been there done that i just call the first pass R n D.... i love that you would rather "fab it" than "Buy it" makes your truck yours!
GT |
Re: Lurker OrrieG Progress Pics
Quote:
|
All times are GMT -4. The time now is 04:34 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com