The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)
-   -   project BIG RED (gen3 on air) (https://67-72chevytrucks.com/vboard/showthread.php?t=342165)

mcbassin 01-02-2010 06:18 PM

Re: project BIG RED (gen3 on air)
 
Great progress! You will driving this truck soon at this pace:metal::metal:

68 short step 01-02-2010 06:45 PM

Re: project BIG RED (gen3 on air)
 
well, the cab still has to come off again... but ill get all the sheetmetal replaced on it first...itll get there tho

killer71 01-02-2010 08:13 PM

Re: project BIG RED (gen3 on air)
 
I'm diggin the new tires/wheels. They go great with those mirrors, in fact i think you oughta throw a set of cab lights on it and roll it!

68 short step 01-02-2010 08:20 PM

Re: project BIG RED (gen3 on air)
 
Quote:

Originally Posted by killer71 (Post 3706487)
I'm diggin the new tires/wheels. They go great with those mirrors, in fact i think you oughta throw a set of cab lights on it and roll it!

thank you, i was going for that retro look... and those are dummy mirrors, with a simple 90* rotation they become wings and i can fly...

killer71 01-02-2010 08:34 PM

Re: project BIG RED (gen3 on air)
 
ya know what they say...gotta have the picts to prove it!

68 short step 01-05-2010 12:41 AM

Re: project BIG RED (gen3 on air)
 
got the cab all bolted down, also the piece on the edge of the cab (that he fender and wiper cowl bolt to) was all rusted out, so it was cut out, and another piece fabbed up...i welded it in and smoothed the welds down...also got the front fender bolted on, i wanna try and re-use the stock inner fenders and hood hinges...
and brrrrrrrrrrrrrrrrrr, it was cold in the shop today.
http://i25.photobucket.com/albums/c8...d/P1040015.jpg
http://i25.photobucket.com/albums/c8...d/P1040016.jpg
http://i25.photobucket.com/albums/c8...d/P1040014.jpg
http://i25.photobucket.com/albums/c8...d/P1040013.jpg
http://i25.photobucket.com/albums/c8...d/PA170003.jpg
http://i25.photobucket.com/albums/c8...d/PA170004.jpg
http://i25.photobucket.com/albums/c8...d/P1040018.jpg
http://i25.photobucket.com/albums/c8...d/P1040019.jpg
http://i25.photobucket.com/albums/c8...d/P1040017.jpg
http://i25.photobucket.com/albums/c8...d/P1040020.jpg

68 short step 01-05-2010 12:42 AM

Re: project BIG RED (gen3 on air)
 
http://i25.photobucket.com/albums/c8...d/P1040023.jpg
http://i25.photobucket.com/albums/c8...d/P1040022.jpg
http://i25.photobucket.com/albums/c8...d/P1040021.jpg
http://i25.photobucket.com/albums/c8...d/P1040024.jpg

mcbassin 01-05-2010 12:47 AM

Re: project BIG RED (gen3 on air)
 
Nice progress Don! Your cab and firewall look great! And man does that LS look sweet perched in there. Hey, what motor mounts/stands did you use and did you make your own adapters? Yep, it was too cold for me to even go out in the shop tonight.

68 short step 01-05-2010 12:52 AM

Re: project BIG RED (gen3 on air)
 
tubular engine mounts from performanceonline.com, and the adaptor plates were from thecarshop.com (i think thats the name)

speeddemon619 01-05-2010 09:59 PM

Re: project BIG RED (gen3 on air)
 
I realllllly love how that ls looks in there, better yet will be the fuel economy and modern reliable engine.

Chevy-Art 02-03-2010 11:19 PM

Re: project BIG RED (gen3 on air)
 
Are the headers you are using on this one, the same as you are using on the hulk? 98-02 Camaro. Where did you buy them from?

68 short step 02-04-2010 08:14 PM

Re: project BIG RED (gen3 on air)
 
Quote:

Originally Posted by Chevy-Art (Post 3778646)
Are the headers you are using on this one, the same as you are using on the hulk? 98-02 Camaro. Where did you buy them from?

yelp, same headers... i got them from texas speed

Vega_67C10 02-04-2010 11:26 PM

Re: project BIG RED (gen3 on air)
 
Congo-rats Short Step! Nice build and nice work, I like it.

nuke1 02-05-2010 12:55 AM

Re: project BIG RED (gen3 on air)
 
nice work Don, i like the way it sits, very nice. Job well done so far.

Hart_Rod 02-07-2010 08:36 AM

Re: project BIG RED (gen3 on air)
 
Quote:

Originally Posted by 68 short step (Post 3705580)
the power steering fittings PN are this from summit
AER-FBM2965 6AN TO 11/16 INVERTED FLARE
AER-FBM2964 -6 AN Male to 5/8-18 in. Inverted Flare
EAR-991955ERL -6 TO 16MM X1.5 POWER STEERING


Don - do these adapters allow you to use the LS style factory lines?

68 short step 02-07-2010 09:50 AM

Re: project BIG RED (gen3 on air)
 
no, thats the PNs to use the braided -6 AN line....

68 short step 02-06-2011 12:37 PM

Re: project BIG RED (gen3 on air)
 
man this thread is wayyyyyyy over due...here we go with a BIG update...
the driver side sheetmetal was crappy, and repared useing fiberglass, bondo, and chicken wire...so everything was replaced... cab corner had to be extended 2" due to the fact that someone replaced the old one with the entire replacement panel, giving me no room to work with good metal..also the front cab support was replaced, the inner rocker pnl, toe board, and outer rocker pnl...then i found cracks in the door, where the hinge bolts to, tried to weld them up, but blew right through...so i started poking around and that metal was supper then, lucky the door didnt fall off when opening it :lol:... so the driver door was replaced with a good used one, i picked up from kennys trucks..
http://i25.photobucket.com/albums/c8...d/0d8c28d4.jpg
http://i25.photobucket.com/albums/c8...d/b4ffd4b3.jpg
http://i25.photobucket.com/albums/c8...d/868c89a6.jpg
http://i25.photobucket.com/albums/c8...d/eba0f82a.jpg
http://i25.photobucket.com/albums/c8...d/34668f3d.jpg
http://i25.photobucket.com/albums/c8...d/9efae275.jpg
http://i25.photobucket.com/albums/c8...d/82204606.jpg
http://i25.photobucket.com/albums/c8...d/P8280052.jpg
http://i25.photobucket.com/albums/c8...d/P8280051.jpg
http://i25.photobucket.com/albums/c8...d/P8280053.jpg
http://i25.photobucket.com/albums/c8...d/P8280054.jpg
http://i25.photobucket.com/albums/c8...d/P8280055.jpg
http://i25.photobucket.com/albums/c8...d/P8270031.jpg
http://i25.photobucket.com/albums/c8...d/P8270030.jpg
http://i25.photobucket.com/albums/c8...d/P8200013.jpg
http://i25.photobucket.com/albums/c8...d/P9120052.jpg
http://i25.photobucket.com/albums/c8...d/P9120054.jpg
http://i25.photobucket.com/albums/c8...d/P9160027.jpg
http://i25.photobucket.com/albums/c8...d/P9160028.jpg
http://i25.photobucket.com/albums/c8...d/P9160029.jpg
http://i25.photobucket.com/albums/c8...d/5c6bf0fb.jpg
http://i25.photobucket.com/albums/c8...d/25a26855.jpg
http://i25.photobucket.com/albums/c8...d/7a9c48f9.jpg
http://i25.photobucket.com/albums/c8...d/P9180038.jpg

68 short step 02-06-2011 12:49 PM

Re: project BIG RED (gen3 on air)
 
and then the same on the pass side...which looked good until i tore into it..
http://i25.photobucket.com/albums/c8...d/PC260020.jpg
http://i25.photobucket.com/albums/c8...d/PC260021.jpg
http://i25.photobucket.com/albums/c8...d/PC270028.jpg
http://i25.photobucket.com/albums/c8...d/PC260026.jpg
http://i25.photobucket.com/albums/c8...d/PC260025.jpg
http://i25.photobucket.com/albums/c8...d/PC260027.jpg
http://i25.photobucket.com/albums/c8...d/PC270029.jpg
http://i25.photobucket.com/albums/c8...d/PC270030.jpg
http://i25.photobucket.com/albums/c8...d/PC270031.jpg
http://i25.photobucket.com/albums/c8...d/PC270032.jpg
http://i25.photobucket.com/albums/c8...d/PC270033.jpg
http://i25.photobucket.com/albums/c8...d/PC270034.jpg
http://i25.photobucket.com/albums/c8...d/PC270041.jpg
http://i25.photobucket.com/albums/c8...d/PC270037.jpg
http://i25.photobucket.com/albums/c8...d/PC270039.jpg
http://i25.photobucket.com/albums/c8...d/PC270038.jpg
http://i25.photobucket.com/albums/c8...d/PC270045.jpg
http://i25.photobucket.com/albums/c8...d/PC280048.jpg
http://i25.photobucket.com/albums/c8...d/PC270046.jpg
http://i25.photobucket.com/albums/c8...d/PC280047.jpg
http://i25.photobucket.com/albums/c8...d/PC280052.jpg
http://i25.photobucket.com/albums/c8...d/PC280053.jpg
http://i25.photobucket.com/albums/c8...d/PC280054.jpg
http://i25.photobucket.com/albums/c8...d/PC280055.jpg
http://i25.photobucket.com/albums/c8...d/PC280057.jpg
http://i25.photobucket.com/albums/c8...d/PC290059.jpg
http://i25.photobucket.com/albums/c8...d/PC290060.jpg
http://i25.photobucket.com/albums/c8...d/PC290061.jpg
http://i25.photobucket.com/albums/c8...d/PC290062.jpg
http://i25.photobucket.com/albums/c8...d/PC290063.jpg

Hart_Rod 02-06-2011 12:52 PM

Re: project BIG RED (gen3 on air)
 
Nice metal work! You gott love those "shade-tree" body guys......

68 short step 02-06-2011 01:03 PM

Re: project BIG RED (gen3 on air)
 
the front fenders had some rust/repairs on the bottom front.. so instead of fooling with it i desided to just replace it all.. here are a few pics of it all bolted together
http://i25.photobucket.com/albums/c8...d/P1010085.jpg
http://i25.photobucket.com/albums/c8...d/P1010086.jpg
http://i25.photobucket.com/albums/c8...d/P1010087.jpg
http://i25.photobucket.com/albums/c8...d/P1010088.jpg
http://i25.photobucket.com/albums/c8...d/P1010091.jpg
http://i25.photobucket.com/albums/c8...d/P1010089.jpg
http://i25.photobucket.com/albums/c8...d/P1010090.jpg
http://i25.photobucket.com/albums/c8...d/P1010092.jpg
http://i25.photobucket.com/albums/c8...d/P1010093.jpg
http://i25.photobucket.com/albums/c8...d/P1010094.jpg
http://i25.photobucket.com/albums/c8...d/P1010095.jpg

robnolimit 02-06-2011 01:07 PM

Re: project BIG RED (gen3 on air)
 
That makes me feel lazy for buying a nice cab, and mine wasn't neer that bad. Hope your not freezin'

68 short step 02-06-2011 02:32 PM

Re: project BIG RED (gen3 on air)
 
ya, thats the way to go for sure....not freezeing at all, got the heaters keeping the shop a nice 68*

67chevy1series 02-06-2011 02:57 PM

Re: project BIG RED (gen3 on air)
 
i love the rims......

jasonhall 02-06-2011 04:39 PM

Re: project BIG RED (gen3 on air)
 
Looks great! Where did you get your fenders and are you happy with how they fit?

jwalk 02-06-2011 11:33 PM

Re: project BIG RED (gen3 on air)
 
You might not remember me, but we met once before in okc.... but any ways this truck is looking great! That rust repair/metal work looks really good!


All times are GMT -4. The time now is 01:25 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com