Re: 85 C10 LT/6L80 Frame off build
luke ,
thank again for the time. I am going to try to straighten up my brake lines a bit. I think the way I have it now will work, I just want to make sure I have clearance between the inner fender and frame for the lines now..... thanks!! |
Re: 85 C10 LT/6L80 Frame off build
Quote:
|
Re: 85 C10 LT/6L80 Frame off build
Quote:
|
Re: 85 C10 LT/6L80 Frame off build
Going back to the paining - Did you do the two tone base colors first, and then come back and clear them (assuming its BC/CC) as one? Or did you do the BC/CC on both colors separately? I'm curious if you could take me through the process.
|
Re: 85 C10 LT/6L80 Frame off build
[QUOTE=Mattchu60;8683346]Going back to the paining - Did you do the two tone base colors first, and then come back and clear them (assuming its BC/CC) as one? Or did you do the BC/CC on both colors separately? I'm curious if you could take me through the process.[/QUOTE
I shot the silver first, mask all the silver off then shot all the blue. Unmask then clear all at once. That’s the way I’ve shot two-tones for years. |
Re: 85 C10 LT/6L80 Frame off build
Thanks for the reply - how long do you let the Silver flash before you masked it? I'm thinking thats the most efficient way to paint it, but worried I'll pull the first coat off with my tape line if its not dry enough.
|
Re: 85 C10 LT/6L80 Frame off build
Quote:
|
Re: 85 C10 LT/6L80 Frame off build
luke,
i hate to bother you again but I was wondering if you might share (for me) some info. related to the AC system. I am wondering what size hose you used on the LS motor water pump to the VA system where it connects to the line above the line that has the valve attached? I think the motor is a larger connection than the connection line on the Vintage Air system? I guess I can just tighten down onto the V.A. connection? just wanting to double check... thank you |
Re: 85 C10 LT/6L80 Frame off build
Subscribed. This is such a clean build!
|
Re: 85 C10 LT/6L80 Frame off build
Quote:
|
Re: 85 C10 LT/6L80 Frame off build
3 Attachment(s)
Bodyside molding going on, I bought the roll and cutting to fit, I figured the precut stuff wouldn't fit very well. one of my favorite things I did to the whole build was having all the OE hardware stripped and clear zinced, I think the door latches and bolts look good against the blue. a big goal was to get this truck quiet inside, covering the doors should help.
|
Re: 85 C10 LT/6L80 Frame off build
What is that material your covering the door with? Did you do any dynamat on the inside of the door shell?
I believe that more noise comes through the doors than the floor. |
Re: 85 C10 LT/6L80 Frame off build
Quote:
I am not sure what "accessory drive" I have? I guess I am using the factory drive system (motor is completely stock)? the V.A. kit I have is the sure fit system for the '86 truck (w/ fact. AC) & then I have the LS motor compressor relocation kit. to be honest I am not sure which way the Flow is on that line? I wonder if i could just attach the 3/4 hose and "sinch down" onto the VA connection..... any assistance would be very greatly appreciated!!!:metal: thank you, |
Re: 85 C10 LT/6L80 Frame off build
Quote:
|
Re: 85 C10 LT/6L80 Frame off build
Quote:
|
Re: 85 C10 LT/6L80 Frame off build
Luke,
I have a build thread in the 73-87 build section, there might be a pic to use in there... I will take a good pic (try) tonight and send it in a PM so not to clutter your fantastic build!!! thank you again for your time & patience!;):metal: |
Re: 85 C10 LT/6L80 Frame off build
In.
|
Re: 85 C10 LT/6L80 Frame off build
5 Attachment(s)
500 miles on the build so far, after some tuning work I’m really happy how it turned out. Looking to have some OE seat belts re-webbed to replace the aftermarket belts I’ve tried to use.
|
Re: 85 C10 LT/6L80 Frame off build
Sooooooooooooooooo nice!
|
Re: 85 C10 LT/6L80 Frame off build
Quote:
|
Re: 85 C10 LT/6L80 Frame off build
"...sooooooo nice..."
"...... +1.." this only begins to describe this build!! this is a very beautiful and well detailed build!! Luke, congrats on getting to drive it at last!!;) |
Re: 85 C10 LT/6L80 Frame off build
I'm impressed by this build. Truly top notch work and the end result is incredible.
I'm also impressed with the speed of the build - you went from primer to a completed truck in less than 2 months! |
Re: 85 C10 LT/6L80 Frame off build
Superb looking truck!!!
|
Re: 85 C10 LT/6L80 Frame off build
Thanks all! Mattchu60 it wasn't quite that quick, however I did do the entire build in 1 year from start to finish. it was fun but I won't be doing that time frame again.
|
Re: 85 C10 LT/6L80 Frame off build
Totally enjoyed following this. And like watching a good movie, I'm bummed it's finished, ha! Glad that you get to enjoy it and I hope that you'll show us pics of it out and about and any more updates. Most of us can only dream of having a truck this nice so don't end the movie yet!
|
All times are GMT -4. The time now is 07:56 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com