Re: First hand experience with changing to the NBS master cylinder WOW!
Change out the MC
Bleed as required Start a new thread |
Re: First hand experience with changing to the NBS master cylinder WOW!
FYI Tried this on a 1993 Suburban with the large 4 wheel anti-lock module and it would require pretty serious line bending. I think it would ended up crimping the line. I think it would be simpler to just make new lines between the proportioning valve and the MC.
My MC gave up and I had to replace it so I can go a trip. So I went back with a replacement unit. Will look at this latter when I have time. |
Re: First hand experience with changing to the NBS master cylinder WOW!
Quote:
|
Re: First hand experience with changing to the NBS master cylinder WOW!
I am doing the NBS MC swap this weekend. It looks fairly easy. I am hoping it looks as easy as everyone says it is. Can't wait to see if this actually helps on this truck.
How do I find out for sure if I have the light duty 3/4 ton? Mine is a 89 and has the 2500 side moldings, but when I run the codes in the glove box I don't have a F44. Mine is a 6 lug also. |
Re: First hand experience with changing to the NBS master cylinder WOW!
Look at the GVW on the door plate.
|
Re: First hand experience with changing to the NBS master cylinder WOW!
Quote:
|
Re: First hand experience with changing to the NBS master cylinder WOW!
Quote:
|
Re: First hand experience with changing to the NBS master cylinder WOW!
Bumping this thread for reference as my 96 K1500 Burb is going under the knife for significant brake, steering and suspension upgrades in a coupla weeks.
Looks like I am gonna pick up a NBS MC... |
Re: First hand experience with changing to the NBS master cylinder WOW!
WOW, I just did the swap on my 95 K1500 Suburban and this thing has never had brake's this good, I can't believe the difference.
|
Re: First hand experience with changing to the NBS master cylinder WOW!
night and day difference. now towing trailer will be a lot more safe.
|
Re: First hand experience with changing to the NBS master cylinder WOW!
Quote:
|
Re: First hand experience with changing to the NBS master cylinder WOW!
speedy, did you ever swap lines to see if it made any difference?
|
Re: First hand experience with changing to the NBS master cylinder WOW!
No I completely forgot. Man I don't know if I want to have to bleed the thing all over again. I'll post up if I do it.
|
Re: First hand experience with changing to the NBS master cylinder WOW!
no worries, i've got to put some new wheel cylinders on my pickup, so i'm going to do the mc at the same time. just thought i would see if you ever tried it!
|
Re: First hand experience with changing to the NBS master cylinder WOW!
Hey guys I just got done with the GMT800 MC swap and I also took the opportunity to install 02 knuckles and rotors/ calipers (to fit under my stock 16" Alcoa wheels). New drums, shoes, and stock replacement wheel cylinders out back. The dead spot does seem reduced, but I'm not 100% sure the braking significantly improved. As others have stated, the GMT800 MC has a smaller bore size so you have to push harder on the pedal even though the pedal is firmer. Anyways, I'm still not satisfied with the brakes even after all this work (reaming the GMT800 knuckles was kinda a pita). Am I correct that converting to hydroboost is my last option? I wish there was a GMT800 master cylinder that had a slightly larger bore size. My truck is a 2000 Z71 Tahoe (old body style).
|
Re: First hand experience with changing to the NBS master cylinder WOW!
I've done this swap on my GMT400 99 3/4 ton, it was simple and I noticed an improved pedal feel and quite a bit better panic stop feeling. Houston traffic sucks. Before, during a panic stop I felt like the pedal was darn near bottomed out and I wasn't going to stop in time, the few panic stops I've done since the swap felt much much safer. I'm very happy with the GMT800 Master so far, my only regret is not doing it sooner. (I had it sitting around for 2+ years before finally doing it)
Next step for me is GMT800 Front and rear disk swap with stock GMT800 calipers, disks, and pads, but I still need to get and modify GMT800 knuckles to fit my truck, and get new tires for my 6 lug wheels (I'll be going from 8 lug to 6 lug) |
Re: First hand experience with changing to the NBS master cylinder WOW!
Quote:
|
Re: First hand experience with changing to the NBS master cylinder WOW!
Also - reaming out the GMT800 knuckles is a huge PITA! If you would like to use my tool (I only used once), let me know and you can borrow it! I also have some tips on how to make the reaming easiest... you'll want to use an air ratchet with the knuckle mounted in a vice. Get an old or new GMT400 upper and lower balljoint handy to test fit as you go along. Both the upper and lower balljoint holes will need reaming. The reaming tool in a socket in conjunction with the air ratchet was definitely the best method I found...
|
Re: First hand experience with changing to the NBS master cylinder WOW!
Sorry to drag this thread back up, so please forgive me. I've searched many threads on many forums about this swap and I'm still getting kind of confused on which MC I should be looking at.
I have a 95 K2500 with the 5.7. I'd like to do this swap on my truck but I'm not sure with NBS Master Cylinder should I be looking at to to replace it. I'm not looking to go to hydro-boost and I plan on keeping the setup as it currently is, vacuum assisted. I've found conflicting issues in various places on whether I should get a 1500 4x4 Master Cylinder from an NBS as the 3/4 ton trucks and up were hydro boost on some models. Or I should look into a 2500 master cylinder. Can anyone tell me definitively which one I should look into getting? |
Re: First hand experience with changing to the NBS master cylinder WOW!
Quote:
|
Re: First hand experience with changing to the NBS master cylinder WOW!
Quote:
|
I showed you what they looked like and listed the part numbers
Quote:
Quote:
Quote:
|
Re: First hand experience with changing to the NBS master cylinder WOW!
Thank you all who responded. You guys rock:metal:
|
Re: First hand experience with changing to the NBS master cylinder WOW!
Gotta put this on the to-do list! :thumbs:
|
Re: First hand experience with changing to the NBS master cylinder WOW!
I used a 2500 nbc on my 97 1500. no issues. I think the 2500 mc is the better option. I have better pedal feel in normal driving and panic stops. as far as the pressure feel of the pedal it is not hard to get it to stop. my wife loves how the brakes feel because they use to scare her before but now she feels much safer driving the truck. not good for me because now she wants to drive the truck. gotta take the good with the bad :lol:.
|
All times are GMT -4. The time now is 05:31 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com