The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - How about some pics of 60-66 Trucks (https://67-72chevytrucks.com/vboard/showthread.php?t=107362)

Re: Post Your Ride 60-66 Trucks

New to this forum so I thought I would post a pic of my 66 stepside. I just finished building the rack and painting the truck. Hope you like it.

http://i176.photobucket.com/albums/w...5/DSC_0244.jpg

http://i176.photobucket.com/albums/w...5/DSC_0240.jpg

http://i176.photobucket.com/albums/w...5/DSC_0246.jpg

Re: Post Your Ride 60-66 Trucks

Josh:

Send me a personal e-mail at dynamiccontracting@sbcglobal.net and I can give your some information about the '64-'66 Chevy truck chrome dog dish hub caps.

You can also check here:

www.lmctruck.com
www.bowtiebits.com
www.classicparts.com
www.oldchevytrucks.com
www.brotherstruck.com

They look like this:

Attachment 273200

Re: Post Your Ride 60-66 Trucks

Here is mine.... thinking about selling it, or fixing the issues I have with it!!!

Re: Post Your Ride 60-66 Trucks

This is my 1965 C10 step side it has been a 6 year project. The motor is a small block and was built by gross racing it put out 430 hp and 406 ft lbs of tork. If you have any comments i would like to hear them thanks

Re: Post Your Ride 60-66 Trucks

here is my 63' chevy c10

Re: Post Your Ride 60-66 Trucks

Here is a picture of mine. I just got the truck and am tring to figure out where to start. 64' C10 swb fleetside w/327 and 3 in the floor.

Re: Post Your Ride 60-66 Trucks

here is my truck but i have the cab braced. i just need a measurement from the rocker panel next to the inner lip up to the top of the drip rail.

Re: Post Your Ride 60-66 Trucks

The bed was made for a military trailer in 65....guess its period correct... I'm changing the rotors to 6 lugs from CPP. I just swapped in the later steering linkage but need help figuring out where to drill the holes for the Idler arm. Anyone have info?

Re: Post Your Ride 60-66 Trucks

My '65 C20:
http://www.flickr.com/photos/mugsys54poncho/567414503/
Rear is bagged, still need to notch. Getting ready to bag the front. Paint when I've got time.

Re: Post Your Ride 60-66 Trucks

Here are some when I was driving it. I drove it for 4 years and then took it apart again..

Re: Post Your Ride 60-66 Trucks

heres a couple shots of my 66'
this is how it looked when i bought it 2 months ago:
http://i197.photobucket.com/albums/a...7109_0_ALB.jpg http://i197.photobucket.com/albums/a...7109_0_ALB.jpg
this is how it looks now:
http://i197.photobucket.com/albums/a...7109_0_ALB.jpg

I will have some parts to bring to the board meeting swap in July! if anyone is interested

Re: Post Your Ride 60-66 Trucks

Quote:

Originally Posted by Frizzle Fry (Post 2214382)

Simple clean build. Looks great. I almost wish I went that route instead of off the deep-end with my 61... Well done.

Maybe so, but when yours is done it's going to be one of the trickist 61's around! I've read you build and it's going to be one bad _ss truck!!

Re: Post Your Ride 60-66 Trucks

nice trucks!!!!!:metal:

Re: Post Your Ride 60-66 Trucks

this its my working project

Re: Post Your Ride 60-66 Trucks

hey fercho?? not to sound rude but was that truck sanded and never painted or got sunk or something? i mean it doesent look that badly rusted but it has alot of surface rust.
thanks,
John

Re: Post Your Ride 60-66 Trucks

i know !!!! when i got it it have been setting for 10 years so that its why the laminated rust, i just bought it 3 months ago paid only $500 for it, great deal right? yea right, i mounted a 350 engine, alternator, fix electrical system replace all brake system changed the drive shaft center support and know i found out that i need to replace the deferential after this i will finally be able to start working on the outside so far i have invested $ 4000 + 550 more on the deferential that i am going to purchase but no regrets here i am happy with my rusted bucket :truck:

Re: Post Your Ride 60-66 Trucks

nice truck prerunerrob good work !!!!!!! :c2:
Hey man that its the steering wheel that i want to get for my truck i saw the ring on eBay do you think it will fit the standard steering wheel of my 66 truck?

Re: Post Your Ride 60-66 Trucks

Quote:

Originally Posted by fercho71 (Post 2242184)

I'm pretty sure the steering wheels are different, the one I have has a flat spot in the middle for the horn ring, but supposedly it is the same as an impala steering wheel. I'm not sure though!

Re: Post Your Ride 60-66 Trucks

Quote:

Originally Posted by Chevy Fleetside (Post 2230254)

Here are some when I was driving it. I drove it for 4 years and then took it apart again..

It's funny. My 65 (I wish I had pics) is the exact same color as this one, even has the same painted smoothie wheels with chrome caps and beauty rings...Same truck, except mine's a fleetside...and in pieces right now...I'll post pics as soon as I have them...

Nice truck!:metal:

Re: Post Your Ride 60-66 Trucks

how do we go about making this a sticky anyone????????

Re: Post Your Ride 60-66 Trucks

Re: 66 custom cab

Quote:

Originally Posted by fchava (Post 1207731)

350/350 vintage air disk brakes 4.5" front drop / 4" rear.

thought I would update my engine and trans. 700R4 now.
[IMG]http://pic19.picturetrail.com/VOL104.../275781115.jpg[/IMG]
[IMG]http://pic19.picturetrail.com/VOL104.../275781113.jpg[/IMG]
[IMG]http://pic19.picturetrail.com/VOL104.../197467149.jpg[/IMG]

Re: Post Your Ride 60-66 Trucks

here's some photos of mine. i still gotta get some updated photos with the "new bed" mounted

[IMG]http://i159.photobucket.com/albums/t...Picture307.jpg[/IMG]

[IMG]http://i159.photobucket.com/albums/t...Picture290.jpg[/IMG]

[IMG]http://i159.photobucket.com/albums/t...Picture292.jpg[/IMG]