Re: Blazer SPID thread?
Quote:
|
Re: Blazer SPID thread?
I don't think the full time hubs came in until after 72. Not sure if 73 was 1st year but my next door neighbor had a 76 that was. I would have thought it would be on all the 4x4 spids 72 and lower.
|
Re: Blazer SPID thread?
Quote:
|
Re: Blazer SPID thread?
Pete,
Good to know. I was under assumption none were full time until after 72'. Have you ever seen one without the locking hubs? I would be interested in seeing a picture as I have never run across one. Richard |
Re: Blazer SPID thread?
Quote:
The post has pics of a pickup without the front locking hubs. I haven't seen a Blazer so equipped yet. Seems like most had the locking hubs added over time. |
Re: Blazer SPID thread?
Not to hi-jack, But does anyone have a pic of a 1/2 ton drive flange?, I thought it was only a 3/4 ton thing.
|
Re: Blazer SPID thread?
1 Attachment(s)
Here is my Blazer's SPID. Some nice options.
|
Re: Blazer SPID thread?
Quote:
|
Re: Blazer SPID thread?
2 Attachment(s)
Locking Hubs were of course optional.
The D44 axle used a hub cap (literally) to cover the end of the wheel hub enclosing the drive flange/drive gear and axle snap ring. Here are some clips from the 68 and 72 service manuals to put a little perspective on it. The caps should be nearly if not identical to the caps used on Full-Time/NP203 square bodies (pictured). The drive flange is something I'd need to dig for to find a picture. Just about any part-time conversion article for a NP203 1/2 ton ride should have pictures of the flanges. |
Re: Blazer SPID thread?
1 Attachment(s)
Attachment 1317547 This looks suspicious...
|
Re: Blazer SPID thread?
Quote:
The only thing that MIGHT be correct is the VIN CE141B631761. Even the wheelbase is suspect considering the model number is a 3/4 fleetside with a typo. All bets are off that they even had an original SPID in front of them while typing this mess. Being as this describes a pickup was it on a Blazer? There are specific threads for Pickups and Subs/Panels too. *Post Your Pickup SPID* *Blazer SPID* *Suburban/Panel SPID* |
Re: Blazer SPID thread?
Quote:
|
Re: Blazer SPID thread?
This is listed on Craig's List in the Dallas, TX area. 1971 super C10, not a Blazer.
|
Re: Blazer SPID thread?
SS Tim, I was referencing the font. We're any typed in lower case?
|
Re: Blazer SPID thread?
1 Attachment(s)
Quote:
Quote:
|
Re: Blazer SPID thread?
5 Attachment(s)
Clean....note underdash speaker, which seems uncommon for 1972
|
Re: Blazer SPID thread?
Quote:
|
Re: Blazer SPID thread?
1 Attachment(s)
My '72
|
Re: Blazer SPID thread?
1 Attachment(s)
Not as pretty as she once was.
|
Re: Blazer SPID thread?
Quote:
|
Re: Blazer SPID thread?
1 Attachment(s)
I just purchased this bare bones Blazer and here's the SPID. Not much there but I do have a question about one of the items.
1AS310 - is the rear seat option but what is 1AN310 - Heavy Duty Auxiliary 'WHAT' Battery? Thanks for any help. |
Re: Blazer SPID thread?
Quote:
|
Re: Blazer SPID thread?
Quote:
|
Re: Blazer SPID thread?
1 Attachment(s)
My 71
|
Re: Blazer SPID thread?
3 Attachment(s)
yellow and black
|
All times are GMT -4. The time now is 01:20 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com