Re: Do you need '64-'66 Chevy Truck Parts?
 

Dave:

Glad to hear you made it home safely. I hope all the 4-5-6 Chevy Truck parts help you get your rig back on the road. Thanks for your business and let me know if I can help you other 4-5-6 Chevy Truck parts in the future.

PS-Post some pictures of your rig when you get it back together. Take care.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks for your continued interest in my 4-5-6 Chevy Truck parts. I can do one or a pair...which side do you need? How about $80.00, picked up at my shop in Kansas City, KS. Let me know which side and I will determine which bed side I need to remove it from.

Let me know your thoughts on this part or other 4-5-6 Chevy Truck parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

It will be a little while till I can get it I have to get the trans done first but when I do it will be dr side I just wanted to make sure you had them. Thanks

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony,

I have a question I was hoping you could help me with, how hard is it to find a chrome rear bumper for a 66' Suburban. My truck currently has the white painted bumpers front and rear and I would like to upgrade. I can buy repro front bumper but have yet to see a Suburban rear. Someone told me the rear bumper is the same as the front but I don't think that's true. I would take my front off and try it but the PO welded the bumpers to the brackets, who knows why?

Thanks for your help, Dave

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony, would you happen to have a nice 62 chevy grill?

Re: Do you need '64-'66 Chevy Truck Parts?
 

Dave:

Thanks for the 4-5-6 Chevy Truck parts inquiry. I have heard the 4-5-6 Burb rear bumper is different from the truck bumpers and rather hard to find. That being said, I do not have one at this time...painted or chrome.

You might try RJ on www.stovebolt.com. He is a good source of '60-'66 Chevy Trucks and parts. You may have to have your factory painted rear bumper chromed.

Sorry I am not better able to help you, but please keep me in mind for other 4-5-6 Chevy Truck parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks for your interest in my 4-5-6 Chevy Truck parts. I do not have any '62 grille assemblies at this time.

You may check with RJ on www.stovebolt.com. He is a very good source of '60-'66 Chevy Trucks and parts.

Sorry I couldn't better assist you with your parts needs and please keep me in mind for your other 4-5-6 Chevy Truck parts needs in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Very well...let me know if/when I can help you with any 4-5-6 Chevy Truck parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

looking for a rear end with 3.38 gears for my '63. can you help?

Re: Do you need '64-'66 Chevy Truck Parts?
 

How much for a spare tire hanger on a 64 LWB?

Re: Do you need '64-'66 Chevy Truck Parts?
 

How about driver and passenger side fresh air vents?

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hi and thanks for the 4-5-6 Chevy Truck parts inquiry. The only factory rear-ends I have are 3.73:1 gear ratio. Sorry I couldn't help you with a 3.38:1 rear-end for your '63, but please keep me in mind for other 4-5-6 Chevy Truck parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks for the inquiry. Please check your PM regarding a 4-5-6 Chevy Truck under-bed spare tire carrier. Thanks for your interest and please keep me in mind for other 4-5-6 Chevy Truck parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Dave:

Thanks for the parts inquiry. I have a few good, used pairs of factory kick panel vent assemblies. How about $40.00, including packaging & shipping?

Let me know your thougths on these parts or other 4-5-6 Chevy Truck parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hello Tony,

I had sent you a PM regarding a piece for my '65 truck - metal piece at the back rear cab - passenger side.

Could you check on this when you have time and get back to me?

Thanks !

Re: Do you need '64-'66 Chevy Truck Parts?
 

Please check your in box, I sent you a PM in regards to a part I'm looking for.

Thanks

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks for the inquiry. The piece you are looking for is a cab extension and they were installed on stepside trucks, to close the area at the front of the step. I have a good used set of the cab extensions and would prefer to sell them as a matched pair.

I will reply to you PM regarding this item and let me know if I can help you with this item or other 4-5-6 Chevy Truck parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

I am on it...sorry for my delay in responding.

Re: Do you need '64-'66 Chevy Truck Parts?
 

i need a good hood for a 1966 gmc pickup lwb. do you have one or know where i could find one?

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony sent you a P.M. yesterday reguarding 63 c10..? please let me know something on it . thanks 283 man:chevy:(Morton).

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony, looking for a drivers side door for a 66 fleetside and also a battery tray, mount etc.......how much and zip is 75023.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hey Tony,
Just wanted to check on the V8 engine perches for my 1966 K10 have you had a chance to get a pair off?

Re: Do you need '64-'66 Chevy Truck Parts?
 

Bob:

First and foremost, sorry for my delay in responding. I pulled one pair, only to discover, they were not factory, instead they were fabricated and installed by the previous owner and not suitable to send to you. The second pair was for a 292, which is different than the V8 perches.

I have located a third pair and I am in the process of getting them bought and shipped to me. Sorry for the delay...these are a little more elusive than I anticipated. I will keep you posted of my progress and will work hard to expedite the process.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Just curious if you got right and left fenders for a 66. Possibly even a end gate for a fleetside long box. Curious on prices. It would be shipped to North Dakota (58788) Thanks

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hi Tony,
I am in need of three things.
First, an original steering wheel.

Second, an original radio for a 66. (I would actually prefer a non working one, as I'm going to be modifying it.)

and third, an original antenna

could you Pm me with prices on those items if you've got them?

Thanks
Jon