Re: Its the shortbed's turn "Project Junkyard Resurrection"
Cool, I just kept seeing ring gear and i was starting to wonder. Truck is coming along nice, its going to look real good when your done.
|
Re: Its the shortbed's turn "Project Junkyard Resurrection"
If I am chaninging my 3.07 (new axle) over to my 3.73 (old axle) should I change gears only or the entire inner carrier? My old axle is closed knuckle but both are dana44's. Just wondering which is better to do....thanks.
|
Re: Its the shortbed's turn "Project Junkyard Resurrection"
Any set out of a dana 44 will work open knuckle or closed.I would just change the whole thing if I was doing it.
|
Re: Its the shortbed's turn "Project Junkyard Resurrection"
what other seals should I change while I have it apart? I figured that you have done this since you are in the middle of two resto's....
|
Re: Its the shortbed's turn "Project Junkyard Resurrection"
you might as well change the axle seals put in new diff bearings and get a crush sleeve or two
|
Re: Its the shortbed's turn "Project Junkyard Resurrection"
I am putting in all new seals everywhere so I dont have to replace them once its done.I checked and replaced bearings as needed(they had been replaced before so only 2 bearings need replaced).I got new crush sleeves too.I cant confirm this but was told to replace the nut that holds the yoke on after you have removed it.I am replacing them too.I put new u joints in the axles and greased everything.I took it completely apart to insure what needed replaced would so I wont have any problems in the future.Cleaned all the parts in the parts cleaner I have too.
|
Re: Its the shortbed's turn "Project Junkyard Resurrection"
Spent the day taking the rear axle half apart.Cleaned it a little.Removed the old t case crossmember to put in the new one with the rare t case skidplate I got.Put in new u joints on the axle but I am going to take them back and get some better ones for it.
|
Re: Its the shortbed's turn "Project Junkyard Resurrection"
good job scoring that at that price, amazing what a junk yard dont realize is worth to the certain portion of the public, good save, I would have crindged to see that being smoooshed. sounds like you got great plans ahead for that guy........love to see it when done
|
Re: Its the shortbed's turn "Project Junkyard Resurrection"
2 Attachment(s)
Well,I have some rust I over looked when I was blasting the frame.It is not rusted through but needs my attention.It is rusted around the front hangers of the rear springs.Im gonna remove the hangers and fix the rust in the next few days.Sounds like fun.Better start digging through the junk in the shop and find the welder :rolleyes: Here are pics of the empty axle housing and a crappy pic of the broken ring gear
Attachment 236899 Attachment 236900 |
Re: Its the shortbed's turn "Project Junkyard Resurrection"
More progress! Keep it up Dustin, it's looking good!
|
Re: Its the shortbed's turn "Project Junkyard Resurrection"
wont those rear springs settle quite a bit after theres some more weight on em? i dunno anything about new springs, just wondering.
|
Re: Its the shortbed's turn "Project Junkyard Resurrection"
Driveshafts are painted.Dust shields are painted,and rear brake drums are painted now.Now I just need to paint the t case crossmember and install it.
|
Re: Its the shortbed's turn "Project Junkyard Resurrection"
what brand lift did you go with? website? thanks... I'm thinking about a 2.5" lift....
|
Re: Its the shortbed's turn "Project Junkyard Resurrection"
I bought the 4" lift from Rough Country.All new springs.Some dont like Rough Country but was very cheap compared to other companies.Around $625 for 4 springs,4 shocks,hardware,and bushings.I dont think they make a lift for 67-68s but Im not sure.Here is a link to their site.I bought my kit off ebay.If you are intersted in that link let me know.
http://roughcountry.com |
Re: Its the shortbed's turn "Project Junkyard Resurrection"
Well,I got the rear axles out.The rear end looks good..lol.Im gonna change the seals and let it be done.The new lockouts should be here tomorrow so I will be waiting on a few parts and the front can go back together.As soon as I get the rebuilt tranny back(still havent yet) I plan on bolting it and the NP205 on the frame.Hopefully a motor will acompany it shortly as its about the only thing keeping the body off the frame.
|
Re: Its the shortbed's turn "Project Junkyard Resurrection"
Quit working on the truck tonight after I got all the rear end apart.Now just a housing to be cleaned.Nothing besides seals,wheel studs, and brakes need attention on the back,unlike the front.I got the new t case crossmember painted and bolted up.
|
Re: Its the shortbed's turn "Project Junkyard Resurrection"
Spent $100+ on bearings,seals,and other misc parts today.Heading to the jy tomorrow looking for any parts I could use,or not really use but hog for myself:lol:Maybe bringing home bucket seat out of a gen 2 blazer to use till I get the real buddy buckets.Hoping to find towhooks,tilts,tachs and other stuff but I will probably have to keep dreaming.:lol:
|
Re: Its the shortbed's turn "Project Junkyard Resurrection"
Nice project. Good score for $350.00. Are you doing the skyjacker softride spring lift? I have been saving for it myself.
|
Re: Its the shortbed's turn "Project Junkyard Resurrection"
No,I would like to have had skyjacker but wasnt friendly for my budget,I bought a $600 Rough Country lift w/ all new springs
|
Re: Its the shortbed's turn "Project Junkyard Resurrection"
Got the new warn hubs,will have pics later
|
Re: Its the shortbed's turn "Project Junkyard Resurrection"
5 Attachment(s)
Took a few pics of the stalled project in the shop while it waits for parts.Took a pic of the motor(needs rebuilt),forgot to take pics of the new heads.Took a pic of the new Warn lockouts,and a pic of the empty axle housing of the corp. 12 bolt while it waits on new seals and bearings to go back together.Didint make it to the jy,planning to go on Sat. and bring home some goodies and hopefully a good swb fleet bed(mine needs work so if I can get a good one I will take it)
Attachment 237912 Attachment 237913 Attachment 237914 Attachment 237915 Attachment 237916 |
Re: Its the shortbed's turn "Project Junkyard Resurrection"
Needed to bring this back up...lol.I finally got around to removing the spring hangers.A half hour,punch,chisle,hammer and torch got them loose.Now to fix the rust and bolt everything back on
|
Re: Its the shortbed's turn "Project Junkyard Resurrection"
Well,I overlooked some rust around a rear crossmember.It turned out to be a bad area,rusted through:whine:I have cut out the bad area,and with some scrap metal I can patch the frame,give it its strength back,and look like I never cut it.I am currently cutting the new piece to size and should have it welded in by the weekend,at the latest.Will have pics tomorrow.
|
Re: Its the shortbed's turn "Project Junkyard Resurrection"
2 Attachment(s)
Well,the new piece fits fine,its vise-griped in place waiting for me to weld it in permanently.Will have more pics tonight or tomorrow.Notice the rust in top pic.Bottom pic is of the hole I cut out for the new piece to fit in.
Attachment 239111 Attachment 239112 |
Re: Its the shortbed's turn "Project Junkyard Resurrection"
5 Attachment(s)
Well,I got the new top frame pieces in and finished...almost ready for paint(again).Have to do some work on the bottom and it will be ready for paint.
Attachment 239390 Attachment 239391 Attachment 239392 Attachment 239393 Attachment 239394 |
All times are GMT -4. The time now is 10:14 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com