The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   What did you do with your truck today, take 2 (https://67-72chevytrucks.com/vboard/showthread.php?t=644706)

ChuckDriver 12-27-2014 09:46 AM

Re: What did you do with your truck today, take 2
 
Nice looking truck Slck57!

57chevyman 12-28-2014 04:57 PM

Re: What did you do with your truck today, take 2
 
1 Attachment(s)
New throttle spring and bracket

57chevyman 12-28-2014 04:59 PM

Re: What did you do with your truck today, take 2
 
1 Attachment(s)
New wire for temp gauge! It's something

Northern lights 12-28-2014 05:38 PM

Re: What did you do with your truck today, take 2
 
Quote:

Originally Posted by 57chevyman (Post 6974755)
New wire for temp gauge! It's something

Not a good idea to zip tie your plug wires together like that. You CAN get crossfireing.

57chevyman 12-28-2014 05:52 PM

Re: What did you do with your truck today, take 2
 
2 Attachment(s)
Quote:

Originally Posted by Northern lights (Post 6974795)
Not a good idea to zip tie your plug wires together like that. You CAN get crossfireing.

damn, didn't know that. thank you. can someone turn me on to what wire looms would be good to get so I can get rid of the zip ties?

this looks pretty good, $6 on eBay

OrrieG 12-28-2014 06:58 PM

Re: What did you do with your truck today, take 2
 
2 Attachment(s)
I have one like that on my chevelle and all the plastic to metal clip points broke in a month. I replaced it and the one on a truck with this one, think its a Mr. Gasket or Accel product. Keeps everything nice and parallel and off the valve covers and headers.

hsdropout 12-29-2014 03:07 PM

Re: What did you do with your truck today, take 2
 
1 Attachment(s)
Found out (in a non-destructive manner) that engine starts while automatic transmission is in drive position. Lokar shifter for TH350. There must be some type of adjustment for the detent mechanism.
Anyone got the scoop on this?

hsdropout 12-29-2014 03:47 PM

Re: What did you do with your truck today, take 2
 
Nevermind....................I found the instructions.
Hey, I can't be the only one who normally just throws the instructions away.

Northern lights 12-29-2014 04:31 PM

Re: What did you do with your truck today, take 2
 
Reading the instructions is like cheating.

crossfire84 12-29-2014 05:46 PM

Re: What did you do with your truck today, take 2
 
Pulled the head light buckets out and blasted them at work today, they look brand new!

57chevyman 12-29-2014 05:51 PM

Re: What did you do with your truck today, take 2
 
5 Attachment(s)
installed new weatherstripping. my old weatherstrips were installed backwards. you have to see that gap between the top edge of the door and the weathertrip. if its flush against it, its backwards

67GMCkid 12-29-2014 06:56 PM

Re: What did you do with your truck today, take 2
 
2 Attachment(s)
Started on a miniature version, much nicer working in the warm house this time of year!

MyDream55 12-30-2014 02:44 AM

Re: What did you do with your truck today, take 2
 
Got my new front bumper installed. Rear bumper sitting in box ready for install next. Pics soon.

Before:
http://i59.tinypic.com/2h6eyrb.jpg

After:
http://i58.tinypic.com/34sgpio.jpg

Russell Ashley 12-30-2014 05:53 PM

Re: What did you do with your truck today, take 2
 
1 Attachment(s)
Quote:

Originally Posted by 57chevyman (Post 6974754)
New throttle spring and bracket

Chevyman, this is just my opinion, but you might want to think about getting a double spring like this. You spring looks like it is stretched already so you might even need to add a link like I did to keep from over stretching it at full throttle. The link also helps keep wear off of the spring ends.

57chevyman 12-30-2014 06:22 PM

Re: What did you do with your truck today, take 2
 
^looks like you got the same springs and bracket I got. I have the other spring. Is the double spring the correct way? did you make that extension yourself or is that available at the auto parts store?

thebebop 12-30-2014 07:48 PM

Re: What did you do with your truck today, take 2
 
4 Attachment(s)
Gas tank in and hooked up, all fuel lines in place. Steering wheel, turn indicators and horn installed and working. Radiator and hoses done. All new wiring done and everything works! Note to self: Next time buy a new wiring harness instead of doing it yourself : ) Fired it up for the first time since we tore it down for the frame off. Started right up and runs great! Next up is a fan and new break lines...

OrrieG 12-30-2014 08:02 PM

Re: What did you do with your truck today, take 2
 
Received headlight adjustment screw kit from Florida Auto Fastener off ebay. $11 including shipping, local "parts" store wanted $3 each, I got 8. Nice repair project I can do in the warm house on the kitchen table....

oldman3 12-30-2014 08:32 PM

Re: What did you do with your truck today, take 2
 
Quote:

Originally Posted by 57chevyman (Post 6977927)
^looks like you got the same springs and bracket I got. I have the other spring. Is the double spring the correct way? did you make that extension yourself or is that available at the auto parts store?

Yes, use the double spring. One is for safety, if one breaks or comes off...Jim

Russell Ashley 12-31-2014 09:29 AM

Re: What did you do with your truck today, take 2
 
Quote:

Originally Posted by 57chevyman (Post 6977927)
^looks like you got the same springs and bracket I got. I have the other spring. Is the double spring the correct way? did you make that extension yourself or is that available at the auto parts store?

The link is just a piece of scrap steel that I picked up and drilled a couple of holes in.

MARTINSR 12-31-2014 11:33 AM

Re: What did you do with your truck today, take 2
 
Quote:

Originally Posted by thebebop (Post 6978080)
Gas tank in and hooked up, all fuel lines in place. Steering wheel, turn indicators and horn installed and working. Radiator and hoses done. All new wiring done and everything works! Note to self: Next time buy a new wiring harness instead of doing it yourself : ) Fired it up for the first time since we tore it down for the frame off. Started right up and runs great! Next up is a fan and new break lines...

That truck is looking SWEET! What an awesome rig! :metal:

Brian

Iceburgh 12-31-2014 02:40 PM

Re: What did you do with your truck today, take 2
 
Quote:

Originally Posted by 67GMCkid (Post 6976327)
Started on a miniature version, much nicer working in the warm house this time of year!

Where did you pick this up at?
Love to have one

thebebop 12-31-2014 03:56 PM

Re: What did you do with your truck today, take 2
 
Quote:

Originally Posted by MARTINSR (Post 6978936)
That truck is looking SWEET! What an awesome rig! :metal:

Brian

Thanks Brian!

Rude Dude 12-31-2014 04:07 PM

Re: What did you do with your truck today, take 2
 
2 Attachment(s)
Spent all day transferring tools to the gift Santa (wife) bought me.

donandal 12-31-2014 06:33 PM

Re: What did you do with your truck today, take 2
 
3 Attachment(s)
I bought these signals a while back.
They are chrome plated cast aluminum and very sturdy.

I made some little dies and made some clear lenses from lexan,
and will use them as backup lights on the 53 chevy pickup.

Attachment 1342642

Attachment 1342643

Attachment 1342646

iowaboynca 01-01-2015 03:14 AM

Re: What did you do with your truck today, take 2
 
Quote:

Originally Posted by Rude Dude (Post 6979259)
Spent all day transferring tools to the gift Santa (wife) bought me.

NICE!!!!....Congratz!


All times are GMT -4. The time now is 01:45 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com