Re: Parting a 72 super with tach, tilt, posi
 

Randy, I see that the upper bedside moldings are still on the truck. Are they for sale and if so how much?? If you have the rest of my stuff off I'll be down tomorrow. Let me know where you'll be.
Ugly 61

Re: Parting a 72 super with tach, tilt, posi
 

Randy, those would be perfect, what do I owe you for those?
Ben:metal:

Re: Parting a 72 super with tach, tilt, posi
 

Randy, since I doubt anyone wants a roached out longbed... do you think you could cut some stuff off for me?

This bed looks straight and somewhat original paint?

If there are no rust holes and the wheel lip looks good, I'd like to get the DS rear wheel well from the bodyline down and about 6-8" back.

I also need to make some small patches and a couple marker patches so a +/- 12" section off the front of the bed somewhere.

The last is my own fault... again, if its straight (should be "rust free") I'd like to get the rear half of the bed. I learned a hard lesson with a grinder and warped the snot out of the back of my DS fleetside bedsides and would like to replace it. I did great with the welder and warped it with a flap disc installed a marker delete patch. Lesson learned.

To save on shipping, I don't need the whole thing, just the "flat" outer skin. You can slice it right where the bed starts curving in to the taillight, just above the trim, and just below the lower bodyline (so I have something to use to line it up) and somewhere near the wheel well like in pic. That should give a somewhat "flat" piece to ship.

Let me know what you think. I know shipping will be $, let me know what you can do.


Here's the shorty bedsides I'm trying to save. Why? Not really sure. I know the new ones are close, but the curves just aren't right. And I kinda like a challenge. I got the hardest part fixed already, the upper wheel arch has been cut out and replaced... and I didn't warp it this time!

http://67-72chevytrucks.com/vboard/a...1&d=1422082777

Re: Parting a 72 super with tach, tilt, posi
 

I will send payment for radio today. before I do I would like to get price on blue headliner and visors. also any other blue interior parts you have. do not need door panels. THANKS

Re: Parting a 72 super with tach, tilt, posi
 

Is the center speaker bracket available? Thanks.

Re: Parting a 72 super with tach, tilt, posi
 

Lee, I don't think its original, I have some others out there, any certain one your wanting? On the 2 wire stands $7 for pair. I have another tower clamp out there, maybe more of them I will look

Gary, they moldings are riveted on, not any good. all depends on time tomorrow, I may be going to get a truck after 2

Ben, just bring me some goodies,lol. I get $70 for the pair usually

67 Chevy RedNeck, its been repainted a couple times and alot of bondo, sorry

1968aj, I'll get radio shipped out to you Mon. On the headliner I'd take $30 and $20 for visors, plus shipping, and guessing it would be probably $40-50 because of size, but it may be less. These are the only belts I have

88IronDuke, I have some other sets out there $19 shipped

Thanks Randy

Re: Parting a 72 super with tach, tilt, posi
 

payment being sent now for radio I will pass on interior parts THANKS

Re: Parting a 72 super with tach, tilt, posi
 

Randy,
Will do, I'll be there Saturday evening, if that's okay with you? I already boxed some things up.....:metal::metal::metal:
Ben

Re: Parting a 72 super with tach, tilt, posi
 

No problem, Thanks 1968aj

Ben, what time you thinking, I want to make sure my wife doesn't have plans for me

Thanks Randy

Re: Parting a 72 super with tach, tilt, posi
 

Pic for Paul

Re: Parting a 72 super with tach, tilt, posi
 

more parts

Re: Parting a 72 super with tach, tilt, posi
 

few

Re: Parting a 72 super with tach, tilt, posi
 

I'll take the wire stands.

I am looking to try and replace all my clamps with original Wittek towers, the originals are so much better than the repops. So anything that you may have to complete a set, I'll most likely take.

Thanks for looking at the alternator. I am looking for an original Delco-Remy with a date code that would somewhat match up with date of my 72 Blazer's build date (October 1971). A Summer to Early Fall of 1971 date is perfect, but anything reasonably close will work too. I will get it re-built and have the aluminum housing re-skinned.

I am definitely hung-up on this originality thing!

Thanks,
Lee

Re: Parting a 72 super with tach, tilt, posi
 

pics for Levi

Re: Parting a 72 super with tach, tilt, posi
 

That will work, PM your payment details and I'll send some $$$

Thanks
Paul

Re: Parting a 72 super with tach, tilt, posi
 

Paul, info sent, Thanks Randy

Re: Parting a 72 super with tach, tilt, posi
 

Chevyguy71, Ed, I have a good drivers door handle, no good pass ones

jake1971, Paul, I looked, none of the parts you need right now, sorry

Thanks Randy

Re: Parting a 72 super with tach, tilt, posi
 

I think I'm caught up on this truck, its completely parted. If you have paid for parts I will ship out first of the week. If I missed anyone please ask again, I did not miss you on purpose, Thanks Randy

Re: Parting a 72 super with tach, tilt, posi
 

randy , payment sent , ship at your leisure , i'm in no hurry , thanks again kevin

Re: Parting a 72 super with tach, tilt, posi
 

payment sent for radio

Re: Parting a 72 super with tach, tilt, posi
 

I got both you guys money, I will ship out asap, Thanks so much, Randy

Re: Parting a 72 super with tach, tilt, posi
 

The other 2 trucks I have bought are 72 C20 AT, highlander with tilt, AC, PS, PB and 71 C10 AT, add on AC, PS, PB

Re: Parting a 72 super with tach, tilt, posi
 

Are either of the 2 new trucks 292 motors, if so do they have original p/s brackets. Do you have complete throttle knob assembly? How about a lighted cigarette lighter? Thanks Ed

Re: Parting a 72 super with tach, tilt, posi
 

Ed, both are 350's. No manual throttles on them. I think they just have the stock lighters in them. Thanks Randy

Re: Parting a 72 super with tach, tilt, posi
 

Hey Randy,
Payment sent on steering wheel and guts. Also looking for an AC control unit in good shape if you have one.
Thanks again, Curt