The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   80 Scottsdale build (https://67-72chevytrucks.com/vboard/showthread.php?t=543511)

UKNOWME 07-12-2018 12:34 AM

Re: 80 Scottsdale build
 
2 Attachment(s)
Finally installed my cab trim and tailgate band

TKCR 07-12-2018 07:47 AM

Re: 80 Scottsdale build
 
Very Nice!!! I think all the trim makes the truck POP!!
Where did you get your trim?
I seen The Truck & Car Shop has the 81-87 cab trim.

UKNOWME 07-12-2018 08:59 AM

Re: 80 Scottsdale build
 
Quote:

Originally Posted by TKCR (Post 8299538)
Very Nice!!! I think all the trim makes the truck POP!!
Where did you get your trim?
I seen The Truck & Car Shop has the 81-87 cab trim.

Thanks! That’s where I bought the cab trim. The tailgate band is NOS.

Hart_Rod 07-12-2018 12:41 PM

Re: 80 Scottsdale build
 
Looks like a totally different truck with the trim on, :metal:!

UKNOWME 07-12-2018 02:29 PM

Re: 80 Scottsdale build
 
Quote:

Originally Posted by Hart_Rod (Post 8299705)
Looks like a totally different truck with the trim on, :metal:!

Thanks

Oscar the grouch 07-12-2018 11:05 PM

Re: 80 Scottsdale build
 
1 Attachment(s)
Your truck started off like the 78 I just plcked up in ruidoso 😎

UKNOWME 07-13-2018 01:23 AM

Re: 80 Scottsdale build
 
Quote:

Originally Posted by Oscar the grouch (Post 8300054)
Your truck started off like the 78 I just plcked up in ruidoso 😎

Funny, my truck came from Los Lunas

Oscar the grouch 07-13-2018 09:27 AM

Re: 80 Scottsdale build
 
Go figure I couldn't find a decent one locally or one that wasn't overpriced, by the way beautiful truck gives me some inspiration on the direction I will go.:metal:

UKNOWME 09-03-2018 10:10 PM

Re: 80 Scottsdale build
 
5 Attachment(s)
This past week has been very productive as c10sinthepark is right around the corner. I changed out the water pump that has been leaking for quite some time. Installed the new to me OEM hood with WamRods. Swapped out my generic LMC grille for a GM restoration parts 73-74 grille. Last I got a little nip & tuck on both bumpers. I’m very pleased with the results. Couldn’t have done it without all the help from my friends.

TKCR 09-04-2018 08:52 AM

Re: 80 Scottsdale build
 
Everything looks nice, especially the bumpers. And the Grille looks good too, I like seeing the emblem on there. :metal:
The bumpers is always something I notice Chip Foose doing on that Overhaulin' Show. It's amazing how little things like that can make the vehicle look so much better.

blazer2007 09-04-2018 10:34 AM

Re: 80 Scottsdale build
 
I just noticed the wamrods, I looked thru the build but didn,t see any info or did I miss a page. I didn,t know they had them for 73-80

z71se 09-15-2018 10:31 PM

Re: 80 Scottsdale build
 
Quote:

Originally Posted by UKNOWME (Post 8336809)
This past week has been very productive as c10sinthepark is right around the corner. I changed out the water pump that has been leaking for quite some time. Installed the new to me OEM hood with WamRods. Swapped out my generic LMC grille for a GM restoration parts 73-74 grille. Last I got a little nip & tuck on both bumpers. I’m very pleased with the results. Couldn’t have done it without all the help from my friends.

Any advice on how you this? I just got my bumpers back from chrome and would like to do the same on my 77. I assume you slotted the left and right side brackets in the rear. For the front side brackets, you slotted the middle brackets and probably slotted and bent the side brackets?

UKNOWME 09-16-2018 12:13 AM

Re: 80 Scottsdale build
 
Quote:

Originally Posted by blazer2007 (Post 8337097)
I just noticed the wamrods, I looked thru the build but didn,t see any info or did I miss a page. I didn,t know they had them for 73-80

They recently released these for the 73-80 trucks

UKNOWME 09-16-2018 12:15 AM

Re: 80 Scottsdale build
 
Quote:

Originally Posted by z71se (Post 8345229)
Any advice on how you this? I just got my bumpers back from chrome and would like to do the same on my 77. I assume you slotted the left and right side brackets in the rear. For the front side brackets, you slotted the middle brackets and probably slotted and bent the side brackets?

Front frame horn was cut and reworded to shorten. Side brackets just drilled new holes further in the frame. Have to not the drivers side for steering gear clearance. Rear brackets shortened and others drilled further in.

Dads79GMC 09-19-2018 11:40 AM

Re: 80 Scottsdale build
 
Extremely nice!!

SATXRusty 11-12-2018 04:14 PM

Quote:

Originally Posted by UKNOWME (Post 8336809)
This past week has been very productive as c10sinthepark is right around the corner. I changed out the water pump that has been leaking for quite some time. Installed the new to me OEM hood with WamRods. Swapped out my generic LMC grille for a GM restoration parts 73-74 grille. Last I got a little nip & tuck on both bumpers. I’m very pleased with the results. Couldn’t have done it without all the help from my friends.

Where did you buy the 73-74 grille from? I have yet to find anyone who still has the reproduction available.
Posted via Mobile Device

UKNOWME 11-12-2018 04:47 PM

Re: 80 Scottsdale build
 
Quote:

Originally Posted by SATXRusty (Post 8382888)
Where did you buy the 73-74 grille from? I have yet to find anyone who still has the reproduction available.
Posted via Mobile Device

This grille was purchased from KeyParts as a GM restoration part but has since be discontinued. I do not know of anyone that is making them at the moment.

UKNOWME 11-12-2018 04:50 PM

Re: 80 Scottsdale build
 
2 Attachment(s)
Installed the newly release US Mags Boulevard rims also. I really love em!

UKNOWME 11-12-2018 04:55 PM

Re: 80 Scottsdale build
 
1 Attachment(s)
New licence plate too

3drburb 11-19-2018 01:31 PM

Re: 80 Scottsdale build
 
Nice, I like the new wheels and the plate. The truck looks awesome as always.

UKNOWME 11-19-2018 01:42 PM

Re: 80 Scottsdale build
 
Quote:

Originally Posted by 3drburb (Post 8387448)
Nice, I like the new wheels and the plate. The truck looks awesome as always.

Thank you very much

kipps 11-20-2018 01:42 PM

Re: 80 Scottsdale build
 
Any explanation of the "New Mexico Milk" front plate? Are you a producer?

UKNOWME 11-20-2018 02:36 PM

Re: 80 Scottsdale build
 
Quote:

Originally Posted by kipps (Post 8388268)
Any explanation of the "New Mexico Milk" front plate? Are you a producer?

No but I live in a area that is heavily populated with dairies and the largest cheese plant in the US. My pay check is greatly influenced by my dairy customers and when one gave me the plate I thought it would be cool to put it on that truck. Around here it’s no big deal but at shows or out of town it creates interest.

kipps 11-20-2018 07:29 PM

Re: 80 Scottsdale build
 
Quote:

Originally Posted by UKNOWME (Post 8388304)
No but I live in a area that is heavily populated with dairies and the largest cheese plant in the US. My pay check is greatly influenced by my dairy customers and when one gave me the plate I thought it would be cool to put it on that truck. Around here it’s no big deal but at shows or out of town it creates interest.

Thanks. It caught my eye, because that's what I spend my time at. It's a very small dairy, just 50 Jerseys with some grazing, and I'm a one man show. Not very profitable, but I still have hope.

photo-tom 11-22-2018 03:11 PM

Re: 80 Scottsdale build
 
Bichin build, sir.

Dads79GMC 11-22-2018 03:19 PM

Re: 80 Scottsdale build
 
Love it! Big fan of two-tones!! Plates are awesome!! Mike

UKNOWME 11-22-2018 03:52 PM

Re: 80 Scottsdale build
 
Quote:

Originally Posted by photo-tom (Post 8389934)
Bichin build, sir.



Quote:

Originally Posted by Dads79GMC (Post 8389943)
Love it! Big fan of two-tones!! Plates are awesome!! Mike

Thanks guys

UKNOWME 10-08-2019 12:04 AM

Re: 80 Scottsdale build
 
3 Attachment(s)
Finally installed my SloshTubz and did the Delmo Speed conversion along with Holley components to add a little nostalgia to my LS. Had a great time at c10sinthepark and was honored to be picked to be among the top 50 to park on the square for the after party.

TKCR 10-08-2019 08:17 PM

Re: 80 Scottsdale build
 
Lookin good!!:metal:


All times are GMT -4. The time now is 05:40 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com