Re: Big Block Build is what I'm calling mine. New pics inside
Subscribed...
|
Re: Big Block Build is what I'm calling mine. New pics inside
Love the big block . If only petrol (gas) was as cheep over here in the UK as it is in the states
|
Re: Big Block Build is what I'm calling mine. New pics inside
2 Attachment(s)
Put my new tires and wheels on today. 255/60/15 up front and 275/60/15 on the rear mounted on 8" rims. I need to take one when the sun is in the right place. :waah:
|
Re: Big Block Build is what I'm calling mine. New pics inside
Quote:
i like this idea.. Best gauge cluster ive seen in a long time |
Re: Big Block Build is what I'm calling mine. New pics inside
Thanks. I ended up painting it black. I might be at the Stockton swap meet July 12th. Still up in the air about that one.
|
Re: Big Block Build is what I'm calling mine. New pics inside
2 Attachment(s)
Can't believe I drove to LA and back with this dist cap and didn't break down. I swapped out the dist and fine tuned the carb and now it has better response then before and I can tell the difference in the giddy up and go. :metal:
|
Re: Big Block Build is what I'm calling mine. New pics inside
Quote:
Thanks:chevy: |
Re: Big Block Build is what I'm calling mine. New pics inside
Quote:
|
Re: Big Block Build is what I'm calling mine. New pics inside
I got one from E-bay but a Worley Auto. It was way too big and they didn't have one to fit. I'll look at Champion and locally. I have a 350 SBC and a 700R4 on the hook ready to install.
|
Re: Big Block Build is what I'm calling mine. New pics inside
I had to redo the brackets for the 4 row. For the 3 row I just had to find thinner rubber to fit the tanks.
|
Re: Big Block Build is what I'm calling mine. New pics inside
Been a long while since I've been on your thread. Love the new shoes! What's your drop specs again?
|
Re: Big Block Build is what I'm calling mine. New pics inside
1 Attachment(s)
what frame mounts are those?...where did you get them?
|
Re: Big Block Build is what I'm calling mine. New pics inside
Quote:
Quote:
|
Re: Big Block Build is what I'm calling mine. New pics inside
1 Attachment(s)
Installed some hub caps today.. :uhmk:
|
Re: Big Block Build is what I'm calling mine. New pics inside
Quote:
|
Re: Big Block Build is what I'm calling mine. New pics inside
I love the color, great looking ride
|
Re: Big Block Build is what I'm calling mine. New pics inside
Quote:
|
Re: Big Block Build is what I'm calling mine. New pics inside
1 Attachment(s)
I bought a die-cast that looks a lot like your truck today at Wallyworld.
|
Re: Big Block Build is what I'm calling mine. New pics inside
I gotta get over to walmart for one of those diecast C10's.
Your truck looks tuff with the hubcaps and white letter tires.:c2: |
Re: Big Block Build is what I'm calling mine. New pics inside
Quote:
|
Re: Big Block Build is what I'm calling mine. New pics inside
1 Attachment(s)
Quote:
|
Re: Big Block Build is what I'm calling mine. New pics inside
2 Attachment(s)
I picked up this 327 a few months ago. Upon further review, we found fuel injection pistons which are 11:1. Don't think I should be using this in a street truck.
|
Re: Big Block Build is what I'm calling mine. New pics inside
What casting number heads were on it? If you run a 70-76cc chamber head it should run fine on pump gas. The cam choice is a factor as well on cylinder pressure and ignition is important as to what fuel can be burned
|
Re: Big Block Build is what I'm calling mine. New pics inside
Not sure about the CC's on the heads. I know they are 2.02 intake Double hump heads. The cam has a 454 lift and If I remember right a 268 Duration.
|
Re: Big Block Build is what I'm calling mine. New pics inside
The 461, 462 and 290 casting 'double hump' heads have 62-64cc chambers. Those along with that small cam, I doubt you could run straight 91/92 pump gas.
Quote:
|
All times are GMT -4. The time now is 11:24 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com