|
Re: Shucks First Build
Could be the combination of the way the light hits it and that stripe drawing your eye.
|
Re: Shucks First Build
Came across some more money and bought some more parts. I'm just trying to put it together so I can drive the truck this summer. I'll worry about paint later. Rebuilt my entire steering column though, do feel accomplished about that.http://i1102.photobucket.com/albums/..._120632659.jpghttp://i1102.photobucket.com/albums/..._120653282.jpg
|
Re: Shucks First Build
|
Re: Shucks First Build
Progress looks good.
Nothing wrong with driving it for the summer. |
Re: Shucks First Build
was that you I saw the other day on K-10 coming back from JOCO? i was in my 77 454 and you were in an extended cab 92-98 Chevy.
|
Re: Shucks First Build
That was me! I noticed it was you, and I love your pickup. Wish mine was that far along.
|
Re: Shucks First Build
Nice work! I'm a little behind you, but like you, just hoping to be able to drive it this summer, looks great!
|
Re: Shucks First Build
Quote:
my son is Braden Smith who has class with your buddy Jadan Johnson. |
Re: Shucks First Build
Cool man, I never knew him personally but I know the name.
But yes I took on a task I didn't realize what I was going to get myself into. Glad I did it but man it gets tough, exhausting, irritating, exciting and very very expensive.. |
Re: Shucks First Build
Nice work you will be on the road in no time. The dash cover from LMC that you used is it padded or molded plastic?
|
Re: Shucks First Build
Molded plastic
|
Re: Shucks First Build
Put a fuel regulator in.
http://i1102.photobucket.com/albums/..._165000605.jpg http://i1102.photobucket.com/albums/..._164917725.jpg http://i1102.photobucket.com/albums/..._160242665.jpg http://i1102.photobucket.com/albums/..._185133291.jpg http://i1102.photobucket.com/albums/...5792998100.jpg http://i1102.photobucket.com/albums/...430_212501.jpg |
Re: Shucks First Build
Good to see you back at it and looking good inside there. I don't like the looks of the fuel reg. You have a mech. pump that really doesn't need a regulator and you have a lot of extra rubber fuel line under pressure in front of the headers a leak could spray them with gas. If you look at factory systems on these trucks everything after the pump is hard line and mounted to the motor. The rubber line going into the pump is not under pressure. Modern pressurized fuel line is different and uses different clamps also. I notice a lot of modern vehicles going up in flames when wrecked also.
|
Re: Shucks First Build
I was told by several different people that a regulator would be for my benefit. Without it the truck was running really rich. Im not sure what else I would do.
|
Re: Shucks First Build
If you have to much fuel pressure it would not aloww your floats to close the fuel inlet and you would have gas overflowing from the carb. If that is not the problem the fuel mixture is adjusted with carb tuning. Pressure regulators are usually used when you have an electric high volume pump overpower carb floats. You may need to rejet your carb or adjust you mixture screws.
|
Re: Shucks First Build
Maybe I'll try that. I figured if I set a lower pressure it could fix some situations. Maybe not. I'll try some new jets. My old Holly had 65s and it ran without problems. I believe the quick fuel stock has 68s. I'll look into that.
|
Re: Shucks First Build
Hey I'm back, its been a minute.
So I'm in the process of building a budget on a 5.3, which I have and a 4l60e. My only question is will the fuel tank I put in my truck work with a little modification for the LS? I have yet to see this fuel tank used on any LS swaps and I already have a fuel door cut out in my bed wood and don't want to move it for any reason. Any answers? OR should I just finish the truck then do the LS swap when I finish? I need others opinions because I keep going in circles. http://i1102.photobucket.com/albums/...BA1E1044C8.jpg http://i1102.photobucket.com/albums/..._221232503.jpg http://i1102.photobucket.com/albums/...C1FF9DBFEA.jpg Not much has been done since I'm at the point where the finishing stuff is super expensive. Wheels, Tires and Paint... |
Re: Shucks First Build
You may be able to install an in tank fuel pump into that tank, if not just run an external fuel pump. The engine shouldn't care how the fuel gets to it as long as it is the correct pressure.
|
Re: Shucks First Build
If you are keeping the tank, use a Bosch 044 (or similar) external pump with a filter before the pump.
|
Re: Shucks First Build
Hey Shucks, if you get the chance, go back and fix your picture links from the start of your build. I'd like to see the whole story but it gets a bit tedious trying to follow along when the pics are dead. Good luck to ya.
|
Quote:
Posted via Mobile Device |
Re: Shucks First Build
Cool man. It'd be cool to follow along from the beginning. Maybe you need to renew your membership at photoshack? I'm no expert on that stuff, but that appears to be the host of the early pics.
|
Re: Shucks First Build
|
Re: Shucks First Build
Back to the body work. This is the last patch I have to do then it's on to the body. Painting the truck myself, Its decided, LS is going to wait till I'm done.
http://i1102.photobucket.com/albums/...D8C546E6F7.jpg http://i1102.photobucket.com/albums/...3CF2ABD78A.jpg I pull the cover off this when I need motivation http://i1102.photobucket.com/albums/...7FB16B26DB.jpg |
| All times are GMT -4. The time now is 03:46 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com