Re: 4x4 1971 K20 build
Things have been going slow lately but they are starting to pick up again. My 78-79 dana 60 is on its way. I'm looking into a transfer case. The wiring has been started. Steering column and gear box will be sent off to be restored.
|
Re: 4x4 1971 K20 build
As my truck is patiently waiting for wires I have been thinking about my motor mount setup. As it would be a nice easy setup for a stock engine, mine won't be. I have decided to redo the whole crossmember as I plan to be putting lots of ponies to the ground later on in life. My Dana 60 will be rebuilt when the truck is on the road and I collect money, but for now it will wait. My steering parts are back and look wonderful. He is about ready to start the wiring. In the meantime my 71 dd had a hg blow so we hooked it up with some arp head bolts and it's rockin again. Stay tuned as hopefully the progress will pick up again.
|
Re: 4x4 1971 K20 build
1 Attachment(s)
my DD
|
Quote:
Posted via Mobile Device |
Re: 4x4 1971 K20 build
Quote:
|
Re: 4x4 1971 K20 build
2 Attachment(s)
Picked up a straight bedside with a small line of rust in the wheel well, and a real nice gate. Brakes are mostly plumbed, engine crossmember should be finished this weekend or damn near done. Then I need gate hardware and an NP261XHD or NP261HD for a transfer case.
|
Re: 4x4 1971 K20 build
That is a nice tailgate. Good find.
Posted via Mobile Device |
Re: 4x4 1971 K20 build
Quote:
|
Re: 4x4 1971 K20 build
1 Attachment(s)
Fitting the Crossmember
|
Re: 4x4 1971 K20 build
Nice gate and bed side. The cross member is looking nice too.
|
Re: 4x4 1971 K20 build
1 Attachment(s)
Quote:
Here's the crossmember. As of now it weighs 42 lbs. 1/4" and fully boxed. This shall keep my dirtymax calm no matter what. |
Re: 4x4 1971 K20 build
Lol. That should do the trick.
Posted via Mobile Device |
Re: 4x4 1971 K20 build
Quote:
|
Re: 4x4 1971 K20 build
Bought some welds wrapped in 37s
|
Re: 4x4 1971 K20 build
Quote:
|
Re: 4x4 1971 K20 build
1 Attachment(s)
Quote:
|
Re: 4x4 1971 K20 build
Quote:
|
Re: 4x4 1971 K20 build
2 Attachment(s)
Slow progress
|
Re: 4x4 1971 K20 build
4 Attachment(s)
I was really hoping for it to be done by now but it will all be worth it. Got a heavy duty crossmember put in. Made all of 1/4" thick steel. I also bought a 14 bolt 11.5" rear out of an 8.1 and it is now installed, just needs painted. Now I'll have a huge u-joint with disc brakes. If anyone needs rebuilt 71 k20 axles I got em! All of the intercooler plumbing is on its way. The rear drive shaft should be finished soon as well. I also bought a fun daily since I have a 60 mile round trip for work each day.
|
Re: 4x4 1971 K20 build
Well the duramax finally runs now after new injectors. It now has an 8" lift as well. I bought a new trans cooler and i now need to order crossover steering.
|
Re: 4x4 1971 K20 build
That is one bad to the bone project man. A 1971 with a D-max and an LS1 daily driver.....:chevy:
|
Re: 4x4 1971 K20 build
Quote:
|
Re: 4x4 1971 K20 build
Awesome on all accounts! Too bad you had to replace the injectors but at least it is running and you know they are new now.
|
Re: 4x4 1971 K20 build
I know its an old thread but hopefully you'll still get notifications. What radiator did you use? Motor mounts?intercooler?
|
Quote:
Posted via Mobile Device |
All times are GMT -4. The time now is 10:46 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com