The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   OR Parting out 72 Suburban K10 350 TH350 (https://67-72chevytrucks.com/vboard/showthread.php?t=522078)

Bgrdmoose 07-28-2013 04:02 AM

Re: Parting out 72 Suburban K10 350 TH350
 
Ill take it. I'll be passing thru on Thursday the 8th. Pm sent
Posted via Mobile Device

chewysask 07-28-2013 10:18 AM

Re: Parting out 72 Suburban K10 350 TH350
 
do you have any rearseat seatbelt brackets ?

tll74 07-28-2013 11:16 AM

Re: Parting out 72 Suburban K10 350 TH350
 
Quote:

Originally Posted by Bgrdmoose (Post 6193253)
Ill take it. I'll be passing thru on Thursday the 8th. Pm sent
Posted via Mobile Device

Sold...PM returned
Quote:

Originally Posted by chewysask (Post 6193390)
do you have any rearseat seatbelt brackets ?

Sorry none at this time.

Thanks, Tom

unclefreddy 08-06-2013 08:08 PM

Re: Parting out 72 Suburban K10 350 TH350
 
Would you happen to have the wire harness to the rear AC unit ? Thanks

tll74 08-07-2013 04:16 PM

Re: Parting out 72 Suburban K10 350 TH350
 
Quote:

Originally Posted by unclefreddy (Post 6208197)
Would you happen to have the wire harness to the rear AC unit ? Thanks

Sorry, not separate from a rear AC conversion.

unclefreddy 08-07-2013 04:19 PM

Re: Parting out 72 Suburban K10 350 TH350
 
How about any stock 16.5x9.75 steel wheels or bucket seats with brackets ?

tll74 08-07-2013 04:32 PM

Re: Parting out 72 Suburban K10 350 TH350
 
Quote:

Originally Posted by unclefreddy (Post 6209651)
How about any stock 16.5x9.75 steel wheels or bucket seats with brackets ?

Sorry, neither at this time. Thanks, Tom

Chuck K 08-20-2013 09:19 PM

Re: Parting out 72 Suburban K10 350 TH350
 
Quote:

Originally Posted by tll74 (Post 5343008)
What headliner panels......worse than bad they are totally gone. Picking up a 72 Tuesday it may have some. Thanks, Tom

Tom
If the 72 you are picking up Tuesday has upper moldings with barn doors I would be interested in them. Thanks Chuck

tll74 08-26-2013 02:07 AM

Re: Parting out 72 Suburban K10 350 TH350
 
Quote:

Originally Posted by Chuck K (Post 6231006)
Tom
If the 72 you are picking up Tuesday has upper moldings with barn doors I would be interested in them. Thanks Chuck

Chuck, are you looking for the complete upper trim kit or just the trim on the rear barn doors?

Chuck K 08-26-2013 09:37 AM

Re: Parting out 72 Suburban K10 350 TH350
 
Tom, I am in need of the complete upper molding kit. Thanks Chuck

1leglance 08-26-2013 06:03 PM

Re: Parting out 72 Suburban K10 350 TH350
 
Howdy Tom,
It was tough to follow all 7 pages of this thread but I think you might still have one of these around :)

I am looking for the drivers side metal channel that goes between the roll up glass and the non-moving glass.
Only need the drivers side but I put an arrow on the pass side one as a reference also.

Please let me know cost with shipping to 85008
thanks
Lance
https://lh5.googleusercontent.com/-P...r+window-1.jpg

tll74 09-02-2013 12:47 PM

Re: Parting out 72 Suburban K10 350 TH350
 
Quote:

Originally Posted by 1leglance (Post 6239841)
Howdy Tom,
It was tough to follow all 7 pages of this thread but I think you might still have one of these around :)

I am looking for the drivers side metal channel that goes between the roll up glass and the non-moving glass.
Only need the drivers side but I put an arrow on the pass side one as a reference also.

Please let me know cost with shipping to 85008
thanks
Lance
https://lh5.googleusercontent.com/-P...r+window-1.jpg

Lance, 28.00 shipped. Thanks, Tom

tll74 09-02-2013 12:49 PM

Re: Parting out 72 Suburban K10 350 TH350
 
Quote:

Originally Posted by Chuck K (Post 6239107)
Tom, I am in need of the complete upper molding kit. Thanks Chuck

Chuck, I have the kit on a couple tailgate style trucks for sure. I will have to look to see if I have the barn door pieces. Thanks, Tom

Chuck K 09-02-2013 05:34 PM

Re: Parting out 72 Suburban K10 350 TH350
 
Thanks Tom for checking keep me posted if nothing else I may take a set with the tailgate and keep my eyes open for the rear doors. Thanks again Chuck.

Ccastro6330 09-05-2013 10:35 AM

Re: Parting out 72 Suburban K10 350 TH350
 
Wanted to know if you still had the front drive shaft and the length and the linkage for the transmission where at for pickup
Posted via Mobile Device

tll74 09-06-2013 11:59 AM

Re: Parting out 72 Suburban K10 350 TH350
 
Quote:

Originally Posted by Chuck K (Post 6250246)
Thanks Tom for checking keep me posted if nothing else I may take a set with the tailgate and keep my eyes open for the rear doors. Thanks again Chuck.

Chuck, I do not have the rear barn door trim. I could do a lift gate kit in very nice condition.
Quote:

Originally Posted by Ccastro6330 (Post 6254739)
Wanted to know if you still had the front drive shaft and the length and the linkage for the transmission where at for pickup
Posted via Mobile Device

Yes on the driveline 125.00 plus shipping. I will have to check for the AT shift linkage. 45.00 if I have it.

Chuck K 09-07-2013 10:11 AM

Re: Parting out 72 Suburban K10 350 TH350
 
Tom let me know what you want for the upper molding trim kit. Thanks Chuck

tll74 09-07-2013 11:22 AM

Re: Parting out 72 Suburban K10 350 TH350
 
Quote:

Originally Posted by Chuck K (Post 6257727)
Tom let me know what you want for the upper molding trim kit. Thanks Chuck

Chuck, 125.00 plus the shipping. I would guess around 25.00-30.00 shipping due to the length. It would be be in a heavy cardboard tube. Thanks, Tom

Chuck K 09-08-2013 01:52 PM

Re: Parting out 72 Suburban K10 350 TH350
 
Tom, as long as everything is straight I will take the upper molding kit. If you run across the back door trim please keep me in mind. Pm me the payment info thanks for your help! Chuck

Chuck K 09-16-2013 08:00 PM

Re: Parting out 72 Suburban K10 350 TH350
 
Tom, If you get they shipping total on the trim kit let me know. I will be out of town until next week and will get the money out to you when I get back. Thanks Chuck

tll74 09-17-2013 01:55 AM

Re: Parting out 72 Suburban K10 350 TH350
 
2 Attachment(s)
Pics of rear barn door handle.

DBear 09-19-2013 05:08 PM

Re: Parting out 72 Suburban K10 350 TH350
 
any sheet metal left. If so, I am interested. Thanks

Whittaker 09-19-2013 06:13 PM

Re: Parting out 72 Suburban K10 350 TH350
 
Any chance you would have a complete third door the rear passenger side and cut the door jams roof and the surrounding sheet metal?

I have a 68 Sub and I use a wheelchair so I'm thinking about flipping the passenger door off another sub onto the left/drivers side of mine where it would open suicide to the rear so i car reach behind me from the drivers seat and pull my wheelchair in the back.

The door itself not the rocker itself aren't as important as the metal around it. and the door post with latch and hinges etc.

Thanks,
Rob

botmfedr1 09-20-2013 03:07 PM

Re: Parting out 72 Suburban K10 350 TH350
 
Tom,

Do you have the rear leaf spring shackle??

Price shipped to 78552,

Thanks,
Mondo
Posted via Mobile Device

botmfedr1 09-20-2013 09:56 PM

Re: Parting out 72 Suburban K10 350 TH350
 
Driver's side....
Posted via Mobile Device


All times are GMT -4. The time now is 10:02 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com