Re: 1950 Chevy 3600 - Bumper Punchin'
 

Some of you may be saying "Why Levi? I thought you already painted your engine?!" And my response would be I did. But i made a mistake...

The ... at the end of that sentence could be enough of an explanation, but to relieve the few currently "in the know" from holding it over me, I made the mistake of quickly grabbing two orange cans of paint off the shelf at the local AutoZone without looking to see what orange it really was. Well, thanks to my good ol' buddy ol' pal Matt, he informed me the day after i painted the engine that the color looked "funny" and then pointed out that the receipt said "hemi orange". So for the last week i've gotten calls from various friends and family asking about my "Chevy Hemi" :rolleyes:

I was going to leave it. But, as usual, Matt was right and it was a better idea to wire it down and paint it again. So, we did.
http://www.iveldesigns.com/__Downloa...09_misc/12.jpg

And then after a few beers, we decided to get the shinny parts out and "test fit" them.
http://www.iveldesigns.com/__Downloa...09_misc/13.jpg

And here's the dreaded list. Blue dots == things that can be done now. everything else is waiting on something else. $ signs are things i have yet to order. It's kinda depressing when i add those things up. Now i see why most people spend a year or more building their rides.
http://www.iveldesigns.com/__Downloa...09_misc/14.jpg

Re: 1950 Chevy 3600 - Bumper Punchin'
 

theres a lot of expensive items still left on that list.... better talk the wife into getting a second part time job ;) good to see you're doing your part to boost this economy levi!

Re: 1950 Chevy 3600 - Bumper Punchin'
 

Levi, I have a used B&M shifter I can hook you up with cheap. I also have a tilt telescopic column from a 78 vette too. LOL And I have a 16 gallon plastic fuel cell cheap too if you want to go that route.

Re: 1950 Chevy 3600 - Bumper Punchin'
 

Smash the piggy bank with a hammer and Git-R-Done :lol: Check your voicemail their is good news for you there ;)

Bob

Re: 1950 Chevy 3600 - Bumper Punchin'
 

yes, yes and yes. I could use all three. I'll give you a ring this week.

thx for the offer man.

Re: 1950 Chevy 3600 - Bumper Punchin'
 

I got the msg. Any time a case of beer is used in bartering for needed parts, I'm a happy man :alc: :alc:

I'll give you a ring tomorrow night.

Re: 1950 Chevy 3600 - Bumper Punchin'
 

looking good.

Re: 1950 Chevy 3600 - Bumper Punchin'
 

Any updates?

Re: 1950 Chevy 3600 - Bumper Punchin'
 

x2... May 30 is approaching quickly. :lol:

Re: 1950 Chevy 3600 - Bumper Punchin'
 

thanks man

Nope. Well, i did get some mid week stuff done like cutting the floor out for the tranny tunnel and i started in on the paper template for it. I also picked up a hurst T handle shifter and a 16 gal fuel cell.

I spent this weekend building a 10x10 shed so that i can get the crap out of my garage and will have room to park both the '50 and the '69 in the garage for the summer. Got everything except trim done on the shed in 2 days. Saturday was snowing so it was slow going. I'll post up some pics of the shed in the Othere Projects forum tonight.

With any luck, next weekend will be highly productive as everything from Scotts Hotrods should be here.

Re: 1950 Chevy 3600 - Bumper Punchin'
 

updates updates updates!

lots of progress and pics this weekend. my IFS showed up from Scotts on friday, and i had the crossmember mocked up by friday night. It was actually a little wider than my frame, so i needed to add some steel to get a good fit. fortunately i had some .125" steel plate, and each side needed exactly .125". So, a little cutting and trimming and we were good to go. Now the cross member sits waiting for a better welder than myself to finish it up.

http://www.IvelDesigns.com/__Downloa..._tunnel/20.jpg

http://www.IvelDesigns.com/__Downloa..._tunnel/21.jpg

http://www.IvelDesigns.com/__Downloa..._tunnel/22.jpg

http://www.IvelDesigns.com/__Downloa..._tunnel/23.jpg

http://www.IvelDesigns.com/__Downloa..._tunnel/24.jpg

Re: 1950 Chevy 3600 - Bumper Punchin'
 

the rest of the weekend was spent helping a buddy move, and then working on the tunnel. It's nearly done, but time ran out for the night tonight. Here's a bunch of pics showing what i ended up with and how i got there.

http://www.IvelDesigns.com/__Downloa...9_tunnel/1.jpg

http://www.IvelDesigns.com/__Downloa...9_tunnel/2.jpg

http://www.IvelDesigns.com/__Downloa...9_tunnel/3.jpg

Alexis really wanted to help, so i got her all "safety geared up". ear plugs in (not just her fingers) hat to hold her hair, face mask, and long sleeves. my wife got a couple pics of her.
http://www.IvelDesigns.com/__Downloa...9_tunnel/4.jpg

http://www.IvelDesigns.com/__Downloa...9_tunnel/5.jpg

http://www.IvelDesigns.com/__Downloa...9_tunnel/6.jpg

http://www.IvelDesigns.com/__Downloa...9_tunnel/7.jpg

http://www.IvelDesigns.com/__Downloa...9_tunnel/8.jpg

http://www.IvelDesigns.com/__Downloa...9_tunnel/9.jpg

Re: 1950 Chevy 3600 - Bumper Punchin'
 

more pics:
http://www.IvelDesigns.com/__Downloa..._tunnel/10.jpg

http://www.IvelDesigns.com/__Downloa..._tunnel/11.jpg

http://www.IvelDesigns.com/__Downloa..._tunnel/12.jpg

and at one point i had all three kids helping out. each with a job appropriate for the skill level.

http://www.IvelDesigns.com/__Downloa..._tunnel/31.jpg

Mikie did some good work on the 10 bolt rear i got from bob68327. after he did this i got the "big boy" grinder out (7" dewalt" and took care of the remaining brackets and junk. wife and kids put on some rubber gloves and put 2 coats of POR 15 on it. really it was just something for them to do as some will get grinded off when i do the rear end.
http://www.IvelDesigns.com/__Downloa..._tunnel/30.jpg

no pics of the rear as it sits now

Re: 1950 Chevy 3600 - Bumper Punchin'
 

and this is how i finished the weekend:

http://www.IvelDesigns.com/__Downloa..._tunnel/13.jpg

Re: 1950 Chevy 3600 - Bumper Punchin'
 

i was going to put this before the pic of the sheetmetal with all of the plate steel and clamps on it, but cannot edit the post now...

****************************************
and when you don't have a sheetmetal brake.... you improvise. the big "U" tunnel will be under the seat, so the hammer marks are a non-concern. I did decide to go with a 3 piece setup for the front half of the tunnel. just so it looks a bit better. I need to practice my welding though :)

Re: 1950 Chevy 3600 - Bumper Punchin'
 

How are you driving with no column, pedals, seats, guages, windows?

You are a master of crazy.

Re: 1950 Chevy 3600 - Bumper Punchin'
 

IFS and tunnel are looking good can't wait for mine to come in.

Re: 1950 Chevy 3600 - Bumper Punchin'
 

HMMMMMMM wonder who you're waitng on ;);) Bob

Re: 1950 Chevy 3600 - Bumper Punchin'
 

Excellent progress Levi, and I'm glad to see the kids out there with you.

Re: 1950 Chevy 3600 - Bumper Punchin'
 

my wife calls it master of dumb. I like your version better :)

I have some other pics for you once i'm done. Also, make sure you use anti-seize even for mock up. shinny parts got me all excited and now i'm looking at possibly having to buy another upper arm due to the rod end seizing in the tub.

It's all good man. After all, if you hadn't had your tree issues, and welded in the crossmember, i wouldn't have the tunnel finished now. It'll get done soon enough. Hopefully I can have the motor mounts ready before you get here too.

Thanks Nate. I think that was the first time all 3 were out there at the same time and not horsing around. Usually I can keep 1 or two busy, but all three is a challenge.

Re: 1950 Chevy 3600 - Bumper Punchin'
 

So tonight's update comes with no pics since my wife is off to a concert with my daughter and has the camera with her. I'm embarrassed to say what 90's pop band they are seeing, so I won't. :)

anyways, the tranny tunnel is now done, firewall to back of cab. Now lets just hope the tranny fits in there when I get that set in later this week.

Re: 1950 Chevy 3600 - Bumper Punchin'
 

You know you wanted to go see The New Kids on the block just admit IT !!!:haha::haha::haha:

Re: 1950 Chevy 3600 - Bumper Punchin'
 

Thanks for the heads up. Hope you don't have to get another upper arm.

I remember making my little sister so mad trashing her New Kids stuff. Good times.

Re: 1950 Chevy 3600 - Bumper Punchin'
 

Sweet build.... I can not wait to see it done.... Keep the pics coming!!! I will be starting a build thread very soon for a 54 GMC I am picking up Saturday.... After seeing yours and a few others I needed one... Here is a peak... I have a big list for it like you have for yours! Lol.. I can not wait to get this thing MUCH closer to the ground!!

Re: 1950 Chevy 3600 - Bumper Punchin'
 

right on man. are you planning to keep the paint and doors as they are? Looking forward to your build thread.