Re: My 50 roadster pickup build
Lookin good,I'm going to print off this entire thread when your done!
|
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
I get ready to start working on mine I'm going to give you a land line call and bend your ear on some ideas I have going thru my head.
|
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
1 Attachment(s)
Going to be installing new latches in the doors. I chose to use bear claw type latches. I had used them before and they worked good. Make sure you buy good quality to start with, not the cheap crap.
My install is a little different from most, as I will be installing mine the opposite of most. This shows the opening I cut for installing latch. |
Re: My 50 roadster pickup build
1 Attachment(s)
This is the piece I made with the latch. I chose to mount mine in the back body door opening. I will show why a little later.
|
Re: My 50 roadster pickup build
1 Attachment(s)
Here everything is welded in place.
|
Re: My 50 roadster pickup build
1 Attachment(s)
This is the old latch opening in the door.
|
Re: My 50 roadster pickup build
1 Attachment(s)
Here it is with the striker mount in the door. This left room to reinstall the window channel in stock location.
|
Re: My 50 roadster pickup build
1 Attachment(s)
By mounting the latch in the body it allowed me to make up this manual button system for opening the doors. A hole was drilled in the cab corner, pipe welded to the hole in corner, and a threaded rod thru the pipe with a knob on the end. Push up on the knob and the door pops open. Part way up the threaded rod is a tee mounted, to this I added another rod that will stick out passed the interior panel for inside use. The top of the threaded rod is secured to the lever on the latch.
|
Re: My 50 roadster pickup build
If anyone wants more info on this just ask, I will make a drawing and take a couple of more pics.
|
Re: My 50 roadster pickup build
1 Attachment(s)
Doors on and working like a charm. Now I can work on the gap a little more.
|
Re: My 50 roadster pickup build
1 Attachment(s)
I decided I did not want any of the vent stuff on the cab. The drivers side was welded shut. This view shows the passenger grill cut out.
|
Re: My 50 roadster pickup build
1 Attachment(s)
Not a good pic, but shows the opening patched with the old grill beside.
|
Re: My 50 roadster pickup build
1 Attachment(s)
This was someone's ideal of a hole for an antenna, or something???
|
Re: My 50 roadster pickup build
1 Attachment(s)
Old area cut out and new patch panel made and installed.
|
Re: My 50 roadster pickup build
Tomorrow we go back to the doors for more mods.
|
Re: My 50 roadster pickup build
Post #134 shows that knob pretty good,you have to look for it.I like that idea!!
|
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
1 Attachment(s)
Here I'm cutting off the top part of door. Cut was made at the top of the body line, this will eliminate where the old window surround was installed. I had to remove this so it was level with the rear of cab.
|
Re: My 50 roadster pickup build
1 Attachment(s)
This pic lets you see what I was referring too. I also had to rework the cab body line to line up with the door better.
|
Re: My 50 roadster pickup build
1 Attachment(s)
By removing the top part of door piece (left) I had to make up a new piece that would stiffing up the top of door, and have a place to attached window felt. The piece on the right is my new piece.
|
Re: My 50 roadster pickup build
1 Attachment(s)
Not a good pic, but if you look at the opening you can see the 1/8" steel piece that was welded in.
|
Re: My 50 roadster pickup build
1 Attachment(s)
Now the inner and outer height is the same. I also modified the inside garnish molding to extend back and tapper to an end.
|
Re: My 50 roadster pickup build
1 Attachment(s)
This was the windshield header and how the door matched to it. Once I start making the top this will all change.
|
All times are GMT -4. The time now is 11:44 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com