Re: 77 yellow gmc swb
 

always something simple! lol

Re: 77 yellow gmc swb
 

just youre typical DOHW moment

Re: 77 yellow gmc swb
 

More progress , I got all the wiring tired up, and the led lights I got for the rear were sticking out to far to get the lens on, so I bent up a box and did a lil filing on the hole , 2 rivets and some silicone and they clear fine !

Re: 77 yellow gmc swb
 

I've made some more progress , got all the underhood wiring done , even hooked up a underhood light , made a battery tray with hold down, finally got the drip rails on , I'll never take them apart again, I had to grind some off the base so I could get the ss trim on , now onto the interior next !

Re: 77 yellow gmc swb
 

Clean & simple - love it man!!!

Re: 77 yellow gmc swb
 

Thanks , I finally got started on my dash panel yesterday ,made from 1/8" aluminum, just taped together at the moment ,

Re: 77 yellow gmc swb
 

Now there's a different look - cool!

Re: 77 yellow gmc swb
 

trick idea

Re: 77 yellow gmc swb
 

I had a problem finding LEDs for the rear lights up to now, because they do only light up one way and do not reflect on the reflector. because of that you only get one bright spot in stead of the whole rear lit up.

do you have all LEDs in your rear lights? any pics of all of them installed and pics of them lit up?

(sorry for my english, I am dutch)..

And I had the problem that there is too little difference between BRAKE, FLASHER and NORMAL light at night..

Re: 77 yellow gmc swb
 

Wow! I think you are on to something there. That looks like it could've been a GM design. Great job!

Re: 77 yellow gmc swb
 

wat you could do is make sumting youreself using a stock rearlight , dril a ring of holes intoo the reflector big enough to hotgleu a single led inside and solder the lot on the back reflector in such a way it comes out to 12 volts , you can either use a broken bulbfitting and solder the led setup to that so you dont have to break intoo the stock wiring or just solder it straight to the wiring when the ring of leds light up the reflector helps a bit and should give a bigger spot of light , the leds themselves will for surtain outlive the reflectors so it doesnt matter too mush that you cant replace them

Re: 77 yellow gmc swb
 

NICE !!!!!!!! That aluminum dash panal will look great buffed & polished. Again and as always AWESOME work...

Re: 77 yellow gmc swb
 

thansk man! good idea

I might even consider doing a mod using these led strips in red:

http://www.componentsandparts.com/So...ip-picture.jpg

I have been told that white LED behind a red lens dont light up well, so I will go with red LEDs.

Re: 77 yellow gmc swb
 

Thanks guys , I cant wait to get this dash panel done ! as for the led's I bought these http://cgi.ebay.com/ebaymotors/ws/eB...=STRK:MEWNX:IT and 1156 just like them, I think they work good ,first pic is tailights second is tail ans stop, I also got all the dash wiring tuned up and put some 5mm leds in for the turn signals,brights and low brake, they are bright !

Re: 77 yellow gmc swb
 

Looking good!
Posted via Mobile Device

Re: 77 yellow gmc swb
 

nice build.

Re: 77 yellow gmc swb
 

nice work on the cluster man is gonna look good once youre done with it.....

Re: 77 yellow gmc swb
 

Thanks guys , you help keep me motivated ! I got a lil more done on the dash panel, I also made a panel to cover up my air compressor mount and horns after seeing the pic of the taillights on, I really noticed that area needed tuned up,fixed it right up, next I got the washer squiters in so I went to put them on but the cowl hood doesnt have the vents for them to exit so I used an old 1 and made a extension, they exit though 1 of the holes in the cowl of the hood ,I'll clean/paint them up and install tomorrow ,

Re: 77 yellow gmc swb
 

very nice. subscribed

Re: 77 yellow gmc swb
 

Thanks ,I got the dash panel tacked together and all fit in with the mounting screws ,also made a plastic template for the column cover,

Re: 77 yellow gmc swb
 

nice work, it looks great.

Re: 77 yellow gmc swb
 

I've been turning new knobs for everything , lights, wipers,turn and tilt levers ... and the heater controls , I had a rough time getting the knobs off the new heater control ,finally ended up cutting them off ,I'll take more pics of them as I get them mounted on ,

Re: 77 yellow gmc swb
 

i think twist style knobs would look better on the truck not sure if they make sumting that would work on the truck setup though
i used to have a opel astra in europe the knobs on that where cable operated and where backlight http://fotos.marktplaats.com/kopen/3...tFKhXTHA==.jpg
pulling the middle knob activates the rearscreen heater the 2 push buttons at the bottom are for airco and closing the outside vent (when driving behind a stinking dieseltruck )
its all build together on a plastic frame

Re: 77 yellow gmc swb
 

I think the knobs looks AWESOME, unique !!! Also what kind of speedo are you goin use, a 160mph ?

Re: 77 yellow gmc swb
 

These knobs you made look awesome!!!