Re: Project "Financial Burden": 1968 SWB C10
 

Mock up intercoolers.

Re: Project "Financial Burden": 1968 SWB C10
 

New wheels and tires.

Wheel Vintiques 12 Series Steel Wheels
Front = 17 x 8 w/ 4.5 inch back spacing
Rear = 17 x 9 w/ 5.25 inch back spacing

Nitto NT450 Tires
Front = 255/50/R17
Rear = 275/50/R17

Re: Project "Financial Burden": 1968 SWB C10
 

Loaded up for storage.

Re: Project "Financial Burden": 1968 SWB C10
 

Congrat's on the new house and bigger shop. Truck is looking good...and who doesn't like two turbos in place!

Re: Project "Financial Burden": 1968 SWB C10
 

Nice progress. Those turbos looks sweet! :metal:

Re: Project "Financial Burden": 1968 SWB C10
 

Subscribed

Re: Project "Financial Burden": 1968 SWB C10
 

Well the new house is finally finished and we have moved in. The workshop is 24' x 26'. I started by epoxy coating the floor and then moved all my stuff out of storage. It's a mess at the moment but I hope to have it functional in the next two months so I can start back on my project.

Re: Project "Financial Burden": 1968 SWB C10
 

Very nice. That thing is gonna rip.

Re: Project "Financial Burden": 1968 SWB C10
 

Looks like a REALLY nice project! Hopefully some day I will get to see it in person. I get over towards Columbus for meetings in Bloomington every month! So yeah, we are kind of neighbors! :)

Re: Project "Financial Burden": 1968 SWB C10
 

Thanks for all the nice comments guys. I finally have my new shop organized and started making sparks for the first time today. It's good to be back in the shop and making progress after 11 months on the pause button. I've attached a picture of the shop as it sits today. I enjoy watching shop tours on YouTube so I figured I should at least post a picture of mine. I'm sure I'll make some more changes but for now I'm ready to start using it!

Re: Project "Financial Burden": 1968 SWB C10
 

Very organized! Almost looks too nice to work in!

Re: Project "Financial Burden": 1968 SWB C10
 

Great work! I'll follow along. Give me some inspiration for when i start working on my 68 SWB C10.

Re: Project "Financial Burden": 1968 SWB C10
 

It's been a long time since my last post. So let's get you up to speed. I painted the inside of the door shells and the new door skins. Since I had easy access at that point I put Dynamat on the inside of skin and the lower part of the door shell. It made a big difference in the sound of the door when you strike it with your knuckle. I hope it helps when you shut the door as well. I purchased a Craig Hopkins "Door Skinning 101" DVD and followed the techniques he outlined. This worked out well and I would recommend the video if you are doing it for the first time. I have to do some more tweaking and final welding but I was happy with how things turned on both doors.

Re: Project "Financial Burden": 1968 SWB C10
 

More pictures.

Re: Project "Financial Burden": 1968 SWB C10
 

I also realized why I see a lot of trucks without the rear tire splash guards. The fit of the aftermarket panel is off by quite a bit. I had to redo and rework them but I was able to get them to fit. I would hate to add up how many hours I have in them for such a small detail but it does finish off that area of the truck.

Re: Project "Financial Burden": 1968 SWB C10
 

Under hood plumbing and mechanicals are next. Here's a shot of one of the intercoolers next to my mock up.

Re: Project "Financial Burden": 1968 SWB C10
 

Nice work, keep it up.

Re: Project "Financial Burden": 1968 SWB C10
 

Very clean work on the sheet metal! Looks great! :metal:

Re: Project "Financial Burden": 1968 SWB C10
 

Looking good.... subscribed

Re: Project "Financial Burden": 1968 SWB C10
 

Making good progress- will be a super nice truck when finished

Re: Project "Financial Burden": 1968 SWB C10
 

I've got several updates to pass along. First I finished welding the door skins and drilled for for the rear view mirrors. I also cut the dash for the center AC vent and the two side vents. The ball in the side vent is a billet piece from Restomod Air.

Re: Project "Financial Burden": 1968 SWB C10
 

I installed a clutch master cylinder from a board member and finished up the weld nuts and support strips for high hump tunnel.

Re: Project "Financial Burden": 1968 SWB C10
 

I also came up with a Dodge Hellcat inspired fresh air inlet setup near the head lights. Duct work will connect these 4 inch tubes to the turbocharger compressor inlets.

Re: Project "Financial Burden": 1968 SWB C10
 

I also mounted the intercoolers and was able to preserve the factory hood latch and grill support. The bottom grill surround needed just a little modification to clear and I made some pass through provisions for the cold side plumbing.

Re: Project "Financial Burden": 1968 SWB C10
 

Santa also brought me 45,000 BTU garage heater which has been nice the past few weeks and an upgraded tool box. I went kinda nuts on organizing stuff.