The 1947 - Present Chevrolet & GMC Truck Message Board Network - PA Yet another 72 going under the torch, factory 3 speed on the tree!

Page 7 of 10

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)

- - PA Yet another 72 going under the torch, factory 3 speed on the tree! (https://67-72chevytrucks.com/vboard/showthread.php?t=751962)

jaybatta

01-08-2018 06:29 PM

Re: Yet another 72 going under the torch, factory 3 speed on the tree!

Quote:

Originally Posted by 1rippen6 (Post 8155463)

Mike passed on the set in the other thread, there is close ups of the chrome rings. The one isn't bad the other has some pitting and marks.

Yea I think I saw those, I was wondering if these were any better

mortoyz

01-08-2018 08:44 PM

Re: Yet another 72 going under the torch, factory 3 speed on the tree!

Do you have a set of the front hold down brackets?

1rippen6

01-08-2018 11:02 PM

Re: Yet another 72 going under the torch, factory 3 speed on the tree!

Quote:

Originally Posted by mortoyz (Post 8155598)

Do you have a set of the front hold down brackets?

For the top? if so yes

1rippen6

01-08-2018 11:03 PM

Re: Yet another 72 going under the torch, factory 3 speed on the tree!

Quote:

Originally Posted by jaybatta (Post 8155478)

Yea I think I saw those, I was wondering if these were any better

Sorry the other set isn't any better.

2006gmcdmax

01-08-2018 11:08 PM

Re: Yet another 72 going under the torch, factory 3 speed on the tree!

1 Attachment(s)

Quote:

Originally Posted by 1rippen6 (Post 8150355)

I should have the plates give me a couple days to look, sorry no bolts but they are 7/16 NFT

Any updates yet on this topic?

Attachment 1737966

mortoyz

01-08-2018 11:12 PM

Re: Yet another 72 going under the torch, factory 3 speed on the tree!

Sorry about that. Yes, for the top.

1rippen6

01-08-2018 11:14 PM

Re: Yet another 72 going under the torch, factory 3 speed on the tree!

Quote:

Originally Posted by 2006gmcdmax (Post 8155736)

Any updates yet on this topic?

Attachment 1737966

I took some pictures of what I have tonight will post soon. I don't have the exact ones for the seat but have the 7/16 fine ones for the inside spare tire carrier. I'm not sure if they look the same but have the same thread size. Just realized something as I'm typing this I have another blazer that I'm going to part that had a rear seat. I will make sure tomorrow that I didn't already cut them out and let you know.

2006gmcdmax

01-08-2018 11:17 PM

Re: Yet another 72 going under the torch, factory 3 speed on the tree!

I had already purchased the rear seat brace from you several months ago and I realized that I need these front two mount which I believe that they are the same as the inside spare tire mounts too. Thanks 1rippin6.

2006gmcdmax

01-08-2018 11:19 PM

Re: Yet another 72 going under the torch, factory 3 speed on the tree!

1rippen6

01-08-2018 11:31 PM

Re: Yet another 72 going under the torch, factory 3 speed on the tree!

Quote:

Originally Posted by mortoyz (Post 8155741)

Sorry about that. Yes, for the top.

32 shipped I can grab some pictures if you like.

1rippen6

01-08-2018 11:39 PM

Re: Yet another 72 going under the torch, factory 3 speed on the tree!

3 Attachment(s)

Quote:

Originally Posted by chevyguy_72 (Post 8155199)

Is the floor in this any good? I mainly need the outside front seat riser from each side... the PO chopped up the seat mounting plates under the floor to put in a different seat... once i removed the new seat mount pretty much everything is swiss cheese on both sides...

Not sure how much you need but here is what they look like

mortoyz

01-09-2018 06:16 PM

Re: Yet another 72 going under the torch, factory 3 speed on the tree!

Quote:

Originally Posted by 1rippen6 (Post 8155767)

32 shipped I can grab some pictures if you like.

If you could please.

1rippen6

01-09-2018 11:21 PM

Re: Yet another 72 going under the torch, factory 3 speed on the tree!

1 Attachment(s)

Quote:

Originally Posted by mortoyz (Post 8156411)

If you could please.

Here you go.

1rippen6

01-09-2018 11:22 PM

Re: Yet another 72 going under the torch, factory 3 speed on the tree!

Quote:

Originally Posted by 2006gmcdmax (Post 8155750)

I got home after dark will take a look tomorrow.

mortoyz

01-09-2018 11:27 PM

Re: Yet another 72 going under the torch, factory 3 speed on the tree!

Quote:

Originally Posted by 1rippen6 (Post 8156643)

Here you go.

Thanks. I’ll take em. Do you happen to have the plate that goes under the latch assembly on the hatch?

1rippen6

01-09-2018 11:52 PM

Re: Yet another 72 going under the torch, factory 3 speed on the tree!

Quote:

Originally Posted by mortoyz (Post 8156650)

Thanks. I’ll take em. Do you happen to have the plate that goes under the latch assembly on the hatch?

I should have one but have looked a couple of times and can't find it.

smbrouss70

01-09-2018 11:56 PM

Re: Yet another 72 going under the torch, factory 3 speed on the tree!

Did you ever get a chance to check on those hatch latches?

1rippen6

01-10-2018 12:00 AM

Re: Yet another 72 going under the torch, factory 3 speed on the tree!

Quote:

Originally Posted by smbrouss70 (Post 8156686)

Did you ever get a chance to check on those hatch latches?

Sorry, I didn't I will try to get to it tomorrow.

Purple67C10

01-10-2018 09:50 AM

Re: Yet another 72 going under the torch, factory 3 speed on the tree!

Received parts yesterday. Thanks again.

1rippen6

01-10-2018 10:48 AM

Re: Yet another 72 going under the torch, factory 3 speed on the tree!

Quote:

Originally Posted by Purple67C10 (Post 8156889)

Received parts yesterday. Thanks again.

Awesome, good to hear!

1rippen6

01-10-2018 07:39 PM

Re: Yet another 72 going under the torch, factory 3 speed on the tree!

Quote:

Originally Posted by 2006gmcdmax (Post 8155750)

Sorry didn't get home until after dark again, its suppose to be 50 degrees Friday so I will get you an answer by this weekend.

2006gmcdmax

01-10-2018 08:17 PM

Re: Yet another 72 going under the torch, factory 3 speed on the tree!

Quote:

Originally Posted by 1rippen6 (Post 8157371)

Sorry didn't get home until after dark again, its suppose to be 50 degrees Friday so I will get you an answer by this weekend.

Sounds good, thanks.

1rippen6

01-10-2018 09:58 PM

Re: Yet another 72 going under the torch, factory 3 speed on the tree!

Quote:

Originally Posted by smbrouss70 (Post 8156686)

Did you ever get a chance to check on those hatch latches?

Pulled the latches 1 is ok the other needs the spring replaced which I can do. I grind the crimped end off replace the spring and then I weld the pin in. Works good as new and the weld can be ground off if it would need worked on again. Let me know if still interested and I can get it repaired this weekend.

smbrouss70

01-10-2018 10:26 PM

Re: Yet another 72 going under the torch, factory 3 speed on the tree!

How much would that be?

1rippen6

01-11-2018 08:32 AM

Re: Yet another 72 going under the torch, factory 3 speed on the tree!

Quote:

Originally Posted by smbrouss70 (Post 8157508)

How much would that be?

80 for the latches

All times are GMT -4. The time now is 05:38 PM.

Page 7 of 10

« First

Show 40 post(s) from this thread on one page