The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 8 of 9 « First 34567 8 9
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   LSx Classifieds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=247)
-   -   DBW pedal mounting bracket (https://67-72chevytrucks.com/vboard/showthread.php?t=631165)

Hart_Rod 02-03-2020 10:39 AM
Re: DBW pedal mounting bracket
 
Quote:
Originally Posted by Richard (Post 8671569)
Did you get payment and shipping info?
Yes. It shipped on Friday vias USPS. Thanks!

Richard 02-05-2020 04:22 AM
Re: DBW pedal mounting bracket
 
Quote:
Originally Posted by Hart_Rod (Post 8671666)
Yes. It shipped on Friday vias USPS. Thanks!
Got it. Thanks!

Old362 07-15-2020 10:41 AM
Re: DBW pedal mounting bracket
 
Will this bracket work with a c6 pedal in a 72 k20 , and still available

Hart_Rod 07-15-2020 10:57 AM
Re: DBW pedal mounting bracket
 
Quote:
Originally Posted by Old362 (Post 8775050)
Will this bracket work with a c6 pedal in a 72 k20 , and still available
Can you post pictures of the pedal?

General23cmp 07-27-2020 01:42 AM
Re: DBW pedal mounting bracket
 
Sorry I didn’t read every post to see if was asked, but I am curious if you can simply swap pedals from one to another. Are LS engines, computers/controllers, etc not mated to their original pedals, like some sort of calibration thing? So if I have truck engine and want to use the corvette pedal assembly for looks, is it as simple as re-pinning?

Hart_Rod 07-27-2020 09:23 AM
Re: DBW pedal mounting bracket
 
Quote:
Originally Posted by General23cmp (Post 8782428)
Sorry I didn’t read every post to see if was asked, but I am curious if you can simply swap pedals from one to another. Are LS engines, computers/controllers, etc not mated to their original pedals, like some sort of calibration thing? So if I have truck engine and want to use the corvette pedal assembly for looks, is it as simple as re-pinning?
Short answer is no. The pedal needs to match your throttlebody, which needs to match you ECM software...

General23cmp 07-27-2020 12:27 PM
Re: DBW pedal mounting bracket
 
Quote:
Originally Posted by Hart_Rod (Post 8782513)
Short answer is no. The pedal needs to match your throttlebody, which needs to match you ECM software...
Thanks for the reply. So if I wanted to use a corvette pedal (because it looks correct) with your bracket, what year truck engines would interchange with it, possibly requiring two wires to be swapped? I’m looking to get a 6L engine, but could go 5.3L truck.

Qwick68 10-12-2020 09:38 PM
Quote:
Originally Posted by General23cmp (Post 8782612)
Thanks for the reply. So if I wanted to use a corvette pedal (because it looks correct) with your bracket, what year truck engines would interchange with it, possibly requiring two wires to be swapped? I’m looking to get a 6L engine, but could go 5.3L truck.
Do you have one of these for a dbw cadillac pedal? I have a Holley terminator x and that is the pedal I have to use.
Posted via Mobile Device

Qwick68 10-12-2020 09:49 PM
Quote:
Originally Posted by General23cmp (Post 8782612)
Thanks for the reply. So if I wanted to use a corvette pedal (because it looks correct) with your bracket, what year truck engines would interchange with it, possibly requiring two wires to be swapped? I’m looking to get a 6L engine, but could go 5.3L truck.
Do you have one of these for a dbw cadillac pedal? I have a Holley terminator x and that is the pedal I have to use.
Posted via Mobile Device

Hart_Rod 10-14-2020 09:05 AM
Re: DBW pedal mounting bracket
 
Quote:
Originally Posted by Qwick68 (Post 8821654)
Do you have one of these for a dbw cadillac pedal? I have a Holley terminator x and that is the pedal I have to use.
Posted via Mobile Device
Can you post some pictures of the pedal?

Rich rodriguez 10-20-2020 01:24 AM
Re: DBW pedal mounting bracket
 
Will a Camaro pedal mount up to this? Wasn’t sure if they shared the same bolt patter..

Hart_Rod 10-20-2020 07:50 AM
Re: DBW pedal mounting bracket
 
Quote:
Originally Posted by Rich rodriguez (Post 8824687)
Will a Camaro pedal mount up to this? Wasn’t sure if they shared the same bolt patter..
You would have to drill new pedal holes, lmk

68basket 12-07-2020 06:28 PM
Re: DBW pedal mounting bracket
 
Just sent payment

Hart_Rod 12-08-2020 03:30 PM
Re: DBW pedal mounting bracket
 
Quote:
Originally Posted by 68basket (Post 8846523)
Just sent payment
Got it! Shipped. Thanks!

cc-rider 01-20-2021 11:04 PM
Do you have these in stock and ready to ship?

And does anyone know the size/thread of the bolt that is used to thread into the original pedal firewall holes?
Posted via Mobile Device

Hart_Rod 01-21-2021 07:18 PM
Re: DBW pedal mounting bracket
 
Quote:
Originally Posted by cc-rider (Post 8867298)
Do you have these in stock and ready to ship?

And does anyone know the size/thread of the bolt that is used to thread into the original pedal firewall holes?
Posted via Mobile Device

I have them in stock. Bracket comes wih the bolts.

Rob

cc-rider 01-22-2021 12:10 AM
Quote:
Originally Posted by Hart_Rod (Post 8867653)
I have them in stock. Bracket comes wih the bolts.

Rob
Awesome that it comes with the bolts. Payment sent. Thanks!
Posted via Mobile Device

Hart_Rod 01-22-2021 12:50 PM
Re: DBW pedal mounting bracket
 
Quote:
Originally Posted by cc-rider (Post 8867786)
Awesome that it comes with the bolts. Payment sent. Thanks!
Posted via Mobile Device
Thanks for the purchase! The Corvette bracket doesn't come with the bolts, but they are just 1/4 - 20. Younshould be able to use the ones from your factory pedal.

Rob

Marine15Z28 01-27-2021 05:43 PM
Re: DBW pedal mounting bracket
 
Payment sent for (2) CPB, Thanks

Hart_Rod 01-27-2021 06:05 PM
Re: DBW pedal mounting bracket
 
Quote:
Originally Posted by Marine15Z28 (Post 8870898)
Payment sent for (2) CPB, Thanks
Thank you. It will be a couple of week as I'm waiting on my machine shop. Let me know if that is a problem.

Rob

will69camaro 02-28-2021 01:17 AM
Re: DBW pedal mounting bracket
 
These in stock?

Hart_Rod 02-28-2021 07:45 PM
Re: DBW pedal mounting bracket
 
Quote:
Originally Posted by will69camaro (Post 8886410)
These in stock?
Yes!

will69camaro 03-01-2021 12:48 AM
Re: DBW pedal mounting bracket
 
Quote:
Originally Posted by Hart_Rod (Post 8886774)
Yes!
Paypal sent.

Hart_Rod 03-01-2021 11:53 AM
Re: DBW pedal mounting bracket
 
Quote:
Originally Posted by will69camaro (Post 8886903)
Paypal sent.
Thanks! Please send shipping address.

Rob

will69camaro 03-01-2021 12:34 PM
Re: DBW pedal mounting bracket
 
Quote:
Originally Posted by Hart_Rod (Post 8887015)
Thanks! Please send shipping address.

Rob
Done! Sorry i thought it was on my paypal but it's in your inbox/email now.


All times are GMT -4. The time now is 08:19 AM.
Page 8 of 9 « First 34567 8 9
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com