Re: D52 Caliper Rear Disc Brake Brackets
I received your payment....thanks
I probably won't get these shipped tomorrow but the following day. I have a rush job I have to get done tomorrow, and it takes 3+ hours to get these brackets ready to ship. Hopefully that will work for you. Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
does your kit require removing axles to install??? and is the price the same as front page
and also which wilwood caliber too use i see some different sizes?? |
Re: D52 Caliper Rear Disc Brake Brackets
You don't have to remove the axles to install these brackets, but you will have to, to remove the backing plates. Unless you cut them apart to get them past the axles. It really isn't difficult to remove the axles. When was the last time you changed the rear end oil? If it's been a while, it might be a good idea to pop the rear cover, R&R the axles, re-install the cover with a new gasket, and fill with your choice of gear oil......just sayin :)
Yes the price is still $232.00 plus $10.00 for shipping. The powder coating is still the same $28.00. You can use any D52 type caliper with this kit. Wilwood makes 2 different sizes of the dual piston D52 calipers. For the rear you will want the ones with the smaller pistons.....1.250" I believe. Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
Anyone run this set up with 15" wheels? I am interested in a set
|
Re: D52 Caliper Rear Disc Brake Brackets
Yes, 15" wheels will work with this conversion, as long as they are disc brake compatable wheels.
|
Re: D52 Caliper Rear Disc Brake Brackets
Have you considered adding tabs to the mounting plate to allow for the standalone wilwood mechanical parking break calipers? I'd love to run this setup and match my front Wilwoods, but need to be able to pass inspection with an eBrake....
|
Re: D52 Caliper Rear Disc Brake Brackets
Yes I had thought of that some time ago. I just haven't done anything with the idea since it will add some cost to the conversion and I'm not sure if that would put it out of price range for more people.
I'm not saying I'm not going to persue it, it just may take a little time to get it to a final design. I checked with Summit, and these are on back order until the 23rd at the eaeliest. Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
2 Attachment(s)
Quote:
http://www.wilwood.com/Calipers/Cali...me=Mech%20Spot They do have a hydro-mechanical parking brake caliper now though that can work with a 1" rotor. http://www.wilwood.com/Calipers/Cali...tion%20P-Brake |
Re: D52 Caliper Rear Disc Brake Brackets
Yeah, I figured I would have to have some thicker spacers machined to make them work with the 1.250" thick rotors.
Those new Wilwood calipers, have a different type of mounting....they aren't cheap either! I wonder if a guy could add a spacer to those, and use them on the 1.250" rotors? Looks like they are a 2 piece design..... |
Re: D52 Caliper Rear Disc Brake Brackets
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
They are very proud of that caliper indeed. I would rather make the spacer for the puck caliper and use it in conjunction with my caliper of choice instead.
I thought about a differential pinion mounted parking brake setup using a single puck type mechanical caliper but for the work & parts involved it would be easier and cheaper to just run these on the actual brake rotors instead. |
Re: D52 Caliper Rear Disc Brake Brackets
Adding a mechanical e-brake to this conversion bracket, is high on my list of to do's. I'm going to be ordering one of the Wilwood mechanical spot calipers soon.
|
Re: D52 Caliper Rear Disc Brake Brackets
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
hey, captainfab i would like to order some of your D52 disc brake brackets and the brake booster bracket for a 72 chevy pickup. do you have any left?
|
Re: D52 Caliper Rear Disc Brake Brackets
I replied to your PM........
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
do you have an idea when these will ship?
|
Re: D52 Caliper Rear Disc Brake Brackets
Ordinarily your order would have shipped today, but I am currently extremely busy. Your order will ship tomorrow, and you should receive it by Friday.
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
thank you very much Captain. i cant wait to get them on my truck.
|
Re: D52 Caliper Rear Disc Brake Brackets
got my brackets a few days ago, they look great. thanks for everything captain. Ill let you know how it goes.
|
Re: D52 Caliper Rear Disc Brake Brackets
Are the GM D52 calipers used on the front of the 88-98 trucks?
|
Re: D52 Caliper Rear Disc Brake Brackets
No, those are the D369 calipers. The last year for the D52's on the trucks was '87, or '91 for the V and R series
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
Thanks for that information. I'd love to install Wilwood two piston calipers on my truck. I guess that can't happen...
|
Re: D52 Caliper Rear Disc Brake Brackets
If you are talking about the '89 K1500 in your sig, I do have a 6 lug rear disc conversion that uses the D369 calipers.
http://www.67-72chevytrucks.com/vboa...d.php?t=494411 But that does not get you the Wilwood dual piston calipers Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
Has anyone had an issue with the outside pad rubbing on the hat of the rotor with this conversion?
|
All times are GMT -4. The time now is 06:46 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com