Re: Yet another GMC build
Quote:
Marc |
Re: Yet another GMC build
2 Attachment(s)
Latest project...
|
Re: Yet another GMC build
2 Attachment(s)
I'm using Dynomax 17749 large body super turbo mufflers. Since they are under the cab I want them relatively quiet. The pipes are part of a Summit universal 2.5"" pipe kit. Got the stainless tips off ebay. Last pic is what it took to do one side. Should have the other side done in a couple days.
|
Re: Yet another GMC build
The exhaust looks good.
Kim |
Re: Yet another GMC build
Side exit is the way to go. It really gives people a scare when you romp on it as you drive by. Especially people with the window down and or on the
Phone. : lol: Posted via Mobile Device Posted via Mobile Device |
Re: Yet another GMC build
another truck build gone wild!
i like it. :D:D:D like the color, like the dash, like it all. but... i'm waiting on the ram air grill scoop mentioned way back on page 2 :D |
Re: Yet another GMC build
Quote:
I wanted to do the scoop but I only have like 1.5" clearance from the hood. Hard to imagine no clearance on one of these but that intake is tall, the engine sits high because of the C4 cross member, and that air box is kind of humongous. |
Re: Yet another GMC build
Quote:
2 yrs ago i saw a 58 with a roots blower and dual quads on top of a 454, with a closed hood. the coolest thing? california plates. he drove all the way out to cruise woodward :D fiberglass isn't really that itchy unless your rough sanding a lot of glass. usually that doesn't happen unless you really mess up (like i did on my door panels :D) |
Re: Yet another GMC build
Nice job on the exhaust!
|
Re: Yet another GMC build
You truck is looking great! I have a question. I have a 55 TF that I am starting on as soon as my son and I complete his 1966 GTO. I have an 96 corvette front end (Complete/cut out with the CVT frame rails) that I could use in the 55, but I want this truck to be a DD, and I am concerned about how low the front would sit. I think your static height was approximately 5 inches (frame rails to ground), but I think I want more than that. In your fabrication, did you see a problem with possibly raising the Static height of the rails by welding the frame higher up on the Corvette cross support?
Thanks for any insight you may have. |
Re: Yet another GMC build
I don't think it would be a problem. Actually it may make fitting the sway bar easier and require less notching of the frame to clear the rack. I adjusted mine by the distance from the top of the tire to the fender lip. I kept jacking the K member up until I got the tire/ fender lip gap I liked. That part differs from owner to owner but I hate that huge gap some cars get when they sit high, plus tire size can vary a bunch from one truck to another. Running stock C5 tires gives me a short tire to begin with. I had to build wooden forms to hold the member in place with adjustable legs so I could level everything before welding. I removed the spring so I could set the A arms at ride height, then raised it up where everything looked good, but there was some play either way. I still think the rear sits too high but I am working on it.
|
Re: Yet another GMC build
Thanks for the quick response. After the frame off on my Son's 66GTO (using an LS1/T56), this kind of fabrication doesn't scare me, I just don't want to spend a lot of time in trial and error. The man I purchased the truck from is a fellow boardmember and lives in Tahlequah, OK. I will be picking the truck up later his month (or early april). It appears you live about 50 miles from him. Would it be possible to stop and look at your truck late in the afternoon so I can get a visual of the frontend?
By the way, I got turned on to your build, and this forum, on the Corvette forum - your bother-in-law posted a link to your build under his corvette build. I'm very glad he did! Ricky |
Re: Yet another GMC build
Yeah, I could do that. As long as you promise not to point or laugh. This is my first real "hot rod". I spent several years tinkering with Camaro and Firebird stuff. Everything bolts on and fits like a glove. With these older cars NOTHING fits without welding, cutting, hammering, and grinding. I learned to weld and paint for this one, and right now I am trying to build carpet, door panels, etc. I get to learn to sew too! I couldn't get better guidance though. My whole family is in to cars. My dad has a 96 Impala SS, 73 Barracuda, a 72 chevy truck, 92 Vette, and 09 Challenger RT. My father in law has a LS1 62 Vette and LT1 37 Ford. Basically I get to drool all over those cars and get real motivated to get mine done. I'm really looking forward to Pigeon Forge TN in september. My real goal is to have the truck done enough to drive it this year. You heard it, drive, not trailer.
|
Re: Yet another GMC build
And just because he did it for me I'll return the favor and add a link to his car. That is... if anyone is interested in seeing a 1964 Stingay convertible with a 570hp LS7 and T56 6spd built to Viper spec. The awesome part is his teeny tiny tires. He should get a Firestone card for those monthly "my car needs new shoes" visits.
|
Re: Yet another GMC build
1 Attachment(s)
Made a template with 9 pieces of poster board, then cut out a piece of carpet. Now I just need to bind the edges and steam it to make it lay down good. Could have went with ACC carpet but it would have been about $350. I got 4 square yards from American Trim and Upholstery Supply for about $100. That's enough to do the floor, a big floor mat, and cover the panel I made to go behind the seat. Plus, the ACC stuff doesn't wrap down the step like I wanted. All I need is the thread now. (I'll get it at the same place... http://www.atrim.com/ )
|
Re: Yet another GMC build
1 Attachment(s)
Have the door panels cut and I am starting to mount them. Then I'll be sewing some pleats in some charcoal leather and gluing like crazy. I'm going to try something a little different with these, and the headliner board as well.
|
Re: Yet another GMC build
That's pretty slick. I can't wait until I'm at that stage.
Kim |
Re: Yet another GMC build
Really nice job.
|
Re: Yet another GMC build
Quote:
So was your carpet cut into several pieces and glued down. It is hard to tell in the pics. I'm getting close buying carpet and doing an install in my 48. Looks good Marc |
Re: Yet another GMC build
That is one big piece of carpet. I fit together several pieces of poster board and taped them into one big piece, then layed it over my carpet and cut it out, with a a hair extra around the edges. I put the carpet in the truck and smoothed it out as best as I could, then did the final trim to fit. I'm not sure about the AD trucks but I think they are narrower than a TF truck. The carpet came 72 inches wide (although on the website it said 60 inches. ) and was plenty wide enough to do this one. I also cut a piece of carpet to glue on a panel that covers the space behind the seat and I have enough left to build one big floor mat. The part I haven't worked out yet is how to keep the carpet up at the top. I could glue the whole thing easy enough but what if I need to run some more wires later? I'm trying to think of a clip or fastener to avoid that.
|
Re: Yet another GMC build
industrial double stick tape used for free floating sheet vinyl flooring might work, don't know if it would hold up to the heat.
|
Re: Yet another GMC build
Quote:
|
Re: Yet another GMC build
1 Attachment(s)
I started with some 1/4 x 1 aluminum bar stock and cut it down and drilled it and made some door trim. It will help hold the door panels and (I think) make it look good. I can't help it, I just love stainless allen head bolts. I thought about painting these but may just leave them brushed and clear them.
|
Re: Yet another GMC build
Looks great!
|
Re: Yet another GMC build
The door panel looks real good.
Kim |
All times are GMT -4. The time now is 01:39 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com